LETSHUOER Soloist Review: Ranked #621 of 1253

Last updated: October 16, 2026

The LETSHUOER Soloist ranks #621 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Shuoer

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

LETSHUOER Soloist - ranked #621 of 1253 In-Ear Headphones · Editor's rating 3.8/5

#621 LETSHUOER Soloist: $219 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 71 against the Harman target. About 3 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.0 dB standard deviation from target. Discontinued.

Is the LETSHUOER Soloist right for you?

Buy it if

  • you like extra bass (about +3 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired (3.5mm)
Deviation From Target2.00 dB standard deviation
Driver TypeDynamic
Drivers1 Dynamic (78mm Kevlar cone)
Form FactorIn-ear
Harman Preference Score71 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.2 dB at 30 Hz)
Tonal Tilt-0.60 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-2.8 dB0.70
High shelf10,000 Hz-2.5 dB0.70
Peak185 Hz-4.4 dB0.83
Peak802 Hz+1.6 dB2.67
Peak3,654 Hz-3.1 dB1.83
Peak6,115 Hz+4.0 dB6.00
Peak7,185 Hz+2.0 dB5.41

Neutral target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 32.

FilterFrequencyGainQ
Low shelf105 Hz-11.3 dB0.70
High shelf10,000 Hz-2.4 dB0.70
Peak174 Hz-4.2 dB0.70
Peak796 Hz+1.7 dB2.53
Peak3,654 Hz-3.1 dB1.84
Peak6,114 Hz+4.0 dB6.00
Peak7,182 Hz+2.0 dB5.50

Studio flat target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak168 Hz-6.4 dB0.70
Peak814 Hz+1.6 dB2.47
Peak2,422 Hz+1.6 dB5.49
Peak4,306 Hz-4.2 dB4.65
Peak4,872 Hz-1.4 dB6.00
Peak6,499 Hz+2.6 dB3.60

Warm target

Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz-2.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak180 Hz-4.2 dB0.88
Peak805 Hz+1.9 dB2.62
Peak1,809 Hz-1.1 dB2.61
Peak3,654 Hz-4.8 dB1.63
Peak4,633 Hz-1.7 dB6.00
Peak6,192 Hz+3.7 dB5.97

Bass target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+1.0 dB0.70
High shelf10,000 Hz-2.5 dB0.70
Peak188 Hz-4.4 dB0.87
Peak804 Hz+1.6 dB2.71
Peak3,654 Hz-3.1 dB1.82
Peak6,115 Hz+4.0 dB6.00
Peak7,184 Hz+2.0 dB5.40

Bright target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 89 out of 100, up from 23.

FilterFrequencyGainQ
Low shelf105 Hz-11.3 dB0.70
High shelf10,000 Hz+1.0 dB0.70
Peak174 Hz-4.2 dB0.70
Peak788 Hz+1.6 dB2.90
Peak2,988 Hz-1.4 dB1.50
Peak5,810 Hz+6.0 dB5.39
Peak7,968 Hz+1.5 dB2.97

V-shaped target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 85 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+1.7 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak180 Hz-3.0 dB0.92
Peak5,754 Hz+6.0 dB4.78

Frequency Response

How the LETSHUOER Soloist measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

LETSHUOER SoloistHarman target
Measured frequency response of the LETSHUOER Soloist-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of hbb, hobbytalk and tonedeafmonk. Thanks to each of them for publishing their work.

More Shuoer headphones →