KZ ZNA Review: Ranked #1049 of 1369

Last updated: October 17, 2026

The KZ ZNA ranks #1049 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KZ

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#1049 KZ ZNA: $22 Linsoul $22 eBay

Pros: About 4 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.6 dB standard deviation from target.

Is the KZ ZNA right for you?

Buy it if

  • you like extra bass (about +4 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 23 points.

Skip it if

  • you want the best value: the higher-rated TRN MT3 costs about $4 less.
BackClosed
ConnectionWired
Deviation From Target2.65 dB standard deviation
Driver TypeHybrid (1 DD + 1 BA)
Drivers1 x 12mm dual-cavity dynamic driver + 1 x 30095 balanced armature driver
Form FactorIn-ear
Frequency Response20Hz - 40kHz
Harman Preference Score63 (median of 8 squig.link measurements, calibrated to AutoEQ)
Impedance34 ohms
Sensitivity112 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+3.9 dB at 30 Hz)
Tonal Tilt-0.86 (negative is warmer, positive brighter)
Weight0.1 lbs (59 g) (with cable)

EQ Presets

Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz-3.7 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak182 Hz-3.2 dB1.04
Peak707 Hz+1.2 dB2.26
Peak2,100 Hz-2.0 dB3.06
Peak5,635 Hz+6.0 dB3.97
Peak8,000 Hz-2.8 dB6.00

Neutral target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 23.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz-1.6 dB0.70
Peak155 Hz-2.9 dB0.70
Peak695 Hz+1.3 dB2.09
Peak2,106 Hz-2.0 dB3.16
Peak5,634 Hz+6.0 dB3.98
Peak8,000 Hz-2.8 dB6.00

Studio flat target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 82 out of 100, up from 8.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak156 Hz-5.3 dB0.72
Peak708 Hz+1.2 dB2.59
Peak2,973 Hz+2.7 dB4.17
Peak5,761 Hz+6.0 dB5.03
Peak8,000 Hz-2.6 dB6.00

Warm target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 85 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-3.4 dB0.70
High shelf10,000 Hz-5.3 dB0.70
Peak177 Hz-3.0 dB1.13
Peak2,228 Hz-2.7 dB1.79
Peak5,818 Hz+5.6 dB6.00
Peak8,000 Hz-5.2 dB6.00

Bass target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 75.

FilterFrequencyGainQ
High shelf10,000 Hz-1.7 dB0.70
Peak49 Hz+0.8 dB2.03
Peak187 Hz-3.2 dB1.11
Peak710 Hz+1.2 dB2.30
Peak2,099 Hz-2.0 dB3.04
Peak5,636 Hz+6.0 dB3.97
Peak8,000 Hz-2.8 dB6.00

Bright target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak155 Hz-2.9 dB0.68
Peak691 Hz+1.3 dB2.15
Peak2,057 Hz-1.9 dB3.43
Peak3,275 Hz+1.2 dB5.44
Peak5,292 Hz+6.0 dB2.33

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+0.8 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak176 Hz-1.8 dB1.39
Peak604 Hz+1.0 dB2.30
Peak1,939 Hz-1.4 dB2.86
Peak3,195 Hz+1.4 dB5.15
Peak5,195 Hz+6.0 dB2.01

Frequency Response

How the KZ ZNA measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 8 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KZ ZNAHarman target
Measured frequency response of the KZ ZNA-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 8 measurements from the squig.link databases of ankramutt, gadgetrytech, hore, ianfann, musicafe, practiphile, pw and vortexreviews. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

5 comparisons

More KZ headphones →