KZ Saga Balanced Review: Ranked #605 of 1061

Last updated: October 15, 2026

The KZ Saga Balanced ranks #605 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KZ

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#605 KZ Saga Balanced: $25.99 Amazon $25.99 eBay

Pros: The Balanced tuning of the very cheap KZ Saga, a single dynamic IEM in a zinc alloy shell. Measurements show treble right on the Harman target and full sub-bass to 20 Hz (score 69 across three measurements).

Cons: Bass sits about 2.8 dB above target, a bass heavy balance. The same listing sells another tuning, so check you order the Balanced version. Its score rests on three measurements.

Is the KZ Saga Balanced right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated TRN MT3 costs about $8 less.
BackClosed
ConnectionWired
Deviation From Target2.06 dB standard deviation
Driver TypeDynamic
Drivers1 x dynamic
Form FactorIn-ear
Harman Preference Score69 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.4 dB at 30 Hz)
Tonal Tilt-0.76 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-2.4 dB0.70
High shelf10,000 Hz-1.8 dB0.70
Peak187 Hz-4.2 dB0.79
Peak2,261 Hz+0.8 dB1.37
Peak5,345 Hz+3.1 dB2.08
Peak7,793 Hz-2.6 dB6.00

Neutral target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-10.9 dB0.70
High shelf10,000 Hz-1.8 dB0.70
Peak175 Hz-4.0 dB0.67
Peak2,066 Hz+0.5 dB0.47
Peak5,345 Hz+3.1 dB2.07
Peak7,791 Hz-2.6 dB6.00

Studio flat target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 11.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak172 Hz-6.2 dB0.68
Peak348 Hz-0.7 dB3.11
Peak2,651 Hz+3.3 dB1.34
Peak5,853 Hz+1.3 dB4.90
Peak7,823 Hz-1.7 dB6.00

Warm target

Set a preamp of -0.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-2.1 dB0.70
High shelf10,000 Hz-5.4 dB0.70
Peak183 Hz-4.0 dB0.80
Peak789 Hz+1.0 dB2.78
Peak3,169 Hz-0.8 dB3.79
Peak5,729 Hz+1.4 dB5.04
Peak7,692 Hz-3.7 dB6.00

Bass target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+1.4 dB0.70
High shelf10,000 Hz-1.8 dB0.70
Peak191 Hz-4.2 dB0.82
Peak2,264 Hz+0.8 dB1.46
Peak5,345 Hz+3.1 dB2.09
Peak7,794 Hz-2.6 dB6.00

Bright target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-10.9 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak176 Hz-4.1 dB0.64
Peak5,071 Hz+5.7 dB1.60

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 91 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+2.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak185 Hz-2.8 dB0.82
Peak4,897 Hz+5.8 dB1.37

Frequency Response

How the KZ Saga Balanced measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KZ Saga BalancedHarman target
Measured frequency response of the KZ Saga Balanced-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of audioamigo, fernandagunsan and koi. Thanks to each of them for publishing their work.

More KZ headphones →