KBear Xuanwu Review: Ranked #926 of 1291

Last updated: October 17, 2026

The KBear Xuanwu ranks #926 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KBEAR

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

KBear Xuanwu - ranked #926 of 1291 In-Ear Headphones · Editor's rating 3.3/5

#926 KBear Xuanwu: $28.99 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 65 against the Harman target. About 4 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.4 dB standard deviation from target. Discontinued.

Is the KBear Xuanwu right for you?

Buy it if

  • you like extra bass (about +4 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired
Deviation From Target2.44 dB standard deviation
Driver TypeDynamic
Drivers1 x 8mm PU + PET carbon composite dynamic driver
Form FactorIn-ear
Frequency Response20Hz - 20,000Hz
Harman Preference Score65 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance16 ohms
Sensitivity106 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.3 dB at 30 Hz)
Tonal Tilt-0.66 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 85 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz-3.3 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak186 Hz-4.9 dB0.77
Peak811 Hz+1.5 dB2.21
Peak2,518 Hz-4.5 dB3.70
Peak4,793 Hz-6.3 dB3.90
Peak6,219 Hz+2.0 dB5.02

Neutral target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 87 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak174 Hz-4.6 dB0.65
Peak805 Hz+1.6 dB2.11
Peak2,519 Hz-4.5 dB3.73
Peak4,794 Hz-6.3 dB3.91
Peak6,219 Hz+2.0 dB5.01

Studio flat target

Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 79 out of 100, up from 10.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak170 Hz-7.0 dB0.69
Peak833 Hz+1.5 dB2.08
Peak2,517 Hz-1.7 dB5.95
Peak4,899 Hz-8.4 dB4.66
Peak6,282 Hz+1.6 dB6.00

Warm target

Set a preamp of -1.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 85 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz-3.1 dB0.70
High shelf10,000 Hz-3.6 dB0.70
Peak181 Hz-4.7 dB0.85
Peak856 Hz+1.9 dB1.80
Peak2,484 Hz-3.0 dB5.92
Peak4,419 Hz-5.0 dB0.75
Peak6,293 Hz+3.1 dB6.00

Bass target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+0.5 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak189 Hz-4.9 dB0.80
Peak813 Hz+1.5 dB2.24
Peak2,518 Hz-4.5 dB3.69
Peak4,793 Hz-6.3 dB3.89
Peak6,218 Hz+2.0 dB5.02

Bright target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz+1.8 dB0.70
Peak186 Hz-4.7 dB0.66
Peak793 Hz+1.5 dB1.93
Peak2,501 Hz-4.0 dB3.46
Peak6,132 Hz+3.3 dB6.00

V-shaped target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+1.2 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak183 Hz-3.5 dB0.81
Peak2,487 Hz-3.5 dB4.00
Peak6,066 Hz+4.1 dB6.00

Frequency Response

How the KBear Xuanwu measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

KBear XuanwuHarman target
Measured frequency response of the KBear Xuanwu-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of arn, obodio and tdl. Thanks to each of them for publishing their work.

More KBEAR headphones →