HZSOUND Luna Review: Ranked #806 of 1253

Last updated: October 16, 2026

The HZSOUND Luna ranks #806 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: HZSOUND

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#806 HZSOUND Luna: $29.99 Amazon $29.99 eBay

Pros: A broadly balanced tuning with a preference score of 68 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.3 dB standard deviation from target.

Is the HZSOUND Luna right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.5 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $6 less.
BackClosed
ConnectionWired (3.5mm)
Deviation From Target2.31 dB standard deviation
Driver TypeDynamic
Drivers1 Dynamic (10mm flat diaphragm)
Form FactorIn-ear
Harman Preference Score68 (median of 7 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz)
Tonal Tilt-0.69 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak174 Hz-4.3 dB0.73
Peak5,914 Hz+4.2 dB1.34

Neutral target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 33.

FilterFrequencyGainQ
Low shelf105 Hz-9.2 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak174 Hz-4.2 dB0.65
Peak5,913 Hz+4.2 dB1.34

Studio flat target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.7 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak172 Hz-6.0 dB0.70
Peak2,435 Hz+1.4 dB6.00
Peak5,345 Hz+2.5 dB0.40

Warm target

Set a preamp of -2.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-0.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak174 Hz-4.1 dB0.75
Peak2,874 Hz-1.7 dB4.69
Peak6,388 Hz+3.5 dB3.02

Bass target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+3.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak24 Hz+1.6 dB1.30
Peak176 Hz-4.3 dB0.76
Peak5,916 Hz+4.2 dB1.34

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 21.

FilterFrequencyGainQ
Low shelf105 Hz-9.2 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak23 Hz+0.9 dB1.63
Peak75 Hz-0.9 dB2.71
Peak174 Hz-4.2 dB0.63
Peak739 Hz+1.1 dB2.35
Peak3,935 Hz+1.7 dB6.00
Peak5,345 Hz+5.9 dB1.37

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 7 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
High shelf10,000 Hz-1.8 dB0.70
Peak23 Hz+1.5 dB1.52
Peak79 Hz-0.8 dB2.38
Peak174 Hz-2.9 dB0.76
Peak3,940 Hz+2.0 dB5.98
Peak5,345 Hz+5.9 dB1.20

Frequency Response

How the HZSOUND Luna measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 7 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

HZSOUND LunaHarman target
Measured frequency response of the HZSOUND Luna-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 7 measurements from the squig.link databases of audioamigo, eplv, pw, soundcheck39, theaudiostore, tonedeafmonk and treblewellxtended. Thanks to each of them for publishing their work.

More HZSOUND headphones →