Dan Clark Audio Ether CX Review: Ranked #52 of 308

Last updated: October 13, 2026

The Dan Clark Audio Ether CX ranks #52 out of 308 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Dan Clark Audio

Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#52 Dan Clark Audio Ether CX: $699 Amazon $699 eBay

Pros: Measured response gives it an excellent Harman preference score of 86 with a 2.20 dB spread, and its mids sit within about 0.5 dB of target, so vocals and instruments sound natural.

Cons: Sub-bass is 5.7 dB short at 30 Hz, so deep bass lacks rumble. Treble sits about 4.1 dB low, so it sounds a little dark.

Released2018 (8 years ago)
BackClosed
ConnectionWired
Deviation From Target2.20 dB standard deviation
Driver TypePlanar magnetic
Form FactorOver-ear
Harman Preference Score86 (measured by oratory1990, via AutoEQ)
Impedance23 ohms
Sensitivity92 dB/mW
Sub-bass ExtensionFalls 6 dB below target at 56 Hz (-5.7 dB at 30 Hz)
Tonal Tilt+0.06 (negative is warmer, positive brighter)
Weight0.9 lbs (430g)
EQ preset to match the Harman target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+3.5 dB0.70
Peak1,247 Hz-3.9 dB1.02
Peak341 Hz-1.5 dB0.64
Peak49 Hz+1.6 dB1.00
Peak4,212 Hz+2.2 dB0.18
High shelf10,000 Hz+1.7 dB0.70
Peak5,747 Hz-2.1 dB5.42
Peak3,451 Hz+2.1 dB6.00
Peak3,094 Hz-2.6 dB5.99
Peak2,774 Hz+1.8 dB6.00

More Dan Clark Audio headphones →