Angelears x TFZ Athena Review: Ranked #746 of 1253

Last updated: October 16, 2026

The Angelears x TFZ Athena ranks #746 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Angelears x TFZ Athena - ranked #746 of 1253 In-Ear Headphones · Editor's rating 3.6/5

#746 Angelears x TFZ Athena: $130 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 69 against the Harman target.

Cons: Treble about 4 dB above target from 3 to 10 kHz, which can sound sharp or tiring at higher volume. An uneven response, 2.5 dB standard deviation from target. Discontinued.

Is the Angelears x TFZ Athena right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 18 points.

Skip it if

  • you are treble-sensitive (treble sits about 3.8 dB above target).
  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired (3.5mm)
Deviation From Target2.50 dB standard deviation
Driver TypeDynamic
Drivers1 Dynamic (10mm dual-magnetic)
Form FactorIn-ear
Harman Preference Score69 (median of 4 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz)
Tonal Tilt+0.11 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-1.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.2 dB1.43
Peak176 Hz-6.2 dB0.70
Peak5,568 Hz-4.2 dB1.26
Peak7,897 Hz-2.9 dB6.00

Neutral target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 43.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak174 Hz-6.2 dB0.64
Peak5,568 Hz-4.2 dB1.27
Peak7,895 Hz-3.0 dB6.00

Studio flat target

Set a preamp of -2.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz-0.8 dB0.70
Peak176 Hz-8.1 dB0.70
Peak350 Hz-1.0 dB2.88
Peak791 Hz+1.2 dB2.84
Peak2,385 Hz+2.3 dB1.30
Peak4,576 Hz-1.5 dB6.00
Peak5,267 Hz-7.1 dB2.55
Peak7,584 Hz-4.3 dB6.00

Warm target

Set a preamp of -1.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.1 dB1.60
Peak174 Hz-6.1 dB0.73
Peak882 Hz+1.6 dB1.39
Peak4,883 Hz-2.6 dB6.00
Peak8,000 Hz-6.9 dB0.54

Bass target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 60.

FilterFrequencyGainQ
Low shelf105 Hz+2.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+2.4 dB1.34
Peak178 Hz-6.2 dB0.72
Peak5,568 Hz-4.2 dB1.26
Peak7,897 Hz-2.9 dB6.00

Bright target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 89 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
High shelf10,000 Hz-3.4 dB0.70
Peak174 Hz-6.2 dB0.64
Peak4,921 Hz-3.1 dB6.00

V-shaped target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 90 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+3.5 dB0.70
High shelf10,000 Hz-1.8 dB0.70
Peak23 Hz+2.3 dB1.52
Peak174 Hz-4.9 dB0.71
Peak3,219 Hz+0.7 dB0.40
Peak4,905 Hz-2.1 dB6.00

Frequency Response

How the Angelears x TFZ Athena measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Angelears x TFZ AthenaHarman target
Measured frequency response of the Angelears x TFZ Athena-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of audioamigo, cqtek, enemyspider and pw. Thanks to each of them for publishing their work.