Yamaha DXR8mkII vs RCF ART 932-A

Last updated: September 7, 2026

Short answer: choose between the Yamaha DXR8mkII and RCF ART 932-A by matching the speaker to the deployment rather than treating their ranking positions as a universal verdict. Coverage, cabinet format, bass extension, output capability, DSP, and service support all matter in a PA system.

Why choose the Yamaha DXR8mkII. Medium-quality vendor data shows a 4.99 ideal-subwoofer preference score with 64Hz measured extension, among the strongest results here. Yamaha’s FIR-X processing, a 1.75-inch neodymium compression driver and a 90° x 60° constant-directivity horn carry over the larger DXR models’ engineering into a compact cabinet.

Why choose the RCF ART 932-A. A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.

What to weigh before buying. No mkIII successor exists for this size yet, so it is the oldest design generation in this ranking’s Yamaha lineup, without app control or Bluetooth audio. The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912.

Buy the Yamaha DXR8mkII when its stated coverage, output, processing, and installation format fit the job better.

Buy the RCF ART 932-A when its stated strengths better suit the venue and the rest of the system.

Yamaha DXR8mkII vs RCF ART 932-A

Specifications Side By Side

Yamaha DXR8mkII RCF ART 932-A
Price$649.00$1,399.00
Ranked#4 of 15 in 8-Inch Two-Way Powered PA Speakers#7 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers8" woofer, 1.75" compression driver12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response57Hz - 20kHz (-10dB, manufacturer specified)50Hz - 20kHz (manufacturer specified)
Dimensions18"H x 11"W x 11"D (458 x 280 x 280 mm)25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)
Maximum SPL130dB peak (manufacturer specified)132dB peak (manufacturer specified)
InputsXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputsXLR/TRS combo
Amplifier Power1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)2100W peak (1500W LF + 600W HF)
Cabinet MaterialMatte-finish ABSPP composite
Rigging3 x M8 points; 35mm dual-angle pole mountM10 inserts; 35mm pole mount
Coverage90° x 60°100° x 60°
Bass Extension (-3dB)69Hz (measured, vendor Spinorama data)-
DSPYesYes
BluetoothNoNo
Weight28.2 lbs / 12.8 kg41.4 lbs / 18.8 kg
Crossover Frequency-700Hz

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha DXR8mkII: $649.00 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR8mkII ranking card

Pros: Medium-quality vendor data shows a 4.99 ideal-subwoofer preference score with 64Hz measured extension, among the strongest results here. Yamaha’s FIR-X processing, a 1.75-inch neodymium compression driver and a 90° x 60° constant-directivity horn carry over the larger DXR models’ engineering into a compact cabinet.

Cons: No mkIII successor exists for this size yet, so it is the oldest design generation in this ranking’s Yamaha lineup, without app control or Bluetooth audio.

Amplifier Power1100W dynamic / 700W continuous (950W LF + 150W HF dynamic)
Bass Extension (-3dB)69Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialMatte-finish ABS
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
DSPYes
Dimensions18"H x 11"W x 11"D (458 x 280 x 280 mm)
Drivers8" woofer, 1.75" compression driver
Frequency Response57Hz - 20kHz (-10dB, manufacturer specified)
InputsXLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs
Maximum SPL130dB peak (manufacturer specified)
Rigging3 x M8 points; 35mm dual-angle pole mount
Weight28.2 lbs / 12.8 kg

RCF ART 932-A: $1,399.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 932-A ranking card

Pros: A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.

Cons: The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912.

Amplifier Power2100W peak (1500W LF + 600W HF)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency700Hz
DSPYes
Dimensions25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)
Drivers12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo
Maximum SPL132dB peak (manufacturer specified)
RiggingM10 inserts; 35mm pole mount
Weight41.4 lbs / 18.8 kg