Short answer: the Wharfedale Super Denton for better sound quality, the Dynaudio Emit M10 for the lower price. The Wharfedale Super Denton ranks #11 of 56 bookshelf speakers at $1499. The Dynaudio Emit M10 ranks #28 at $800, $699 cheaper.
What the Wharfedale Super Denton gets right: A 3-way design with a 1” soft dome tweeter, a 2” soft dome midrange offset to the side of a centered 6.5” woven Kevlar woofer - a more compact alternative to Wharfedale’s own Linton 85 with a similar overall character. The catch: A mid-range scoop from about 200-800Hz and a separate upper-midrange scoop were both audible in direct ABX comparison against a reference-neutral speaker, giving aggressive-sounding material a more subdued character.
What the Dynaudio Emit M10 offers: CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. Watch for: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange - the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t.
Buy the Wharfedale Super Denton if sound quality matters more than the price. Buy the Dynaudio Emit M10 if the price matters more than sound quality.
Specifications Side By Side
| Wharfedale Super Denton | Dynaudio Emit M10 | |
|---|---|---|
| Price | $1499 | $800 |
| Ranked | #11 of 56 in Medium Size Bookshelf Speakers | #28 of 56 in Medium Size Bookshelf Speakers |
| Drivers | 1" soft dome tweeter, 2" soft dome midrange, 6.5" woven Kevlar woofer | 28mm soft dome tweeter, 14cm MSP mid/bass driver |
| Sensitivity | 86.6dB (measured by Erin’s Audio Corner) | 83.5dB (2.83V/1m, measured, Audio Science Review) |
| Woofer Cabinet | ported | ported |
| Dimensions | 14.2"H x 9.7"W x 10.8"D (360 x 246 x 275 mm) | 11.5"H x 6.7"W x 9.4"D (292 x 170 x 240 mm) |
| Weight | 20.3 lbs / 9.2 kg (20.2 lbs) each | 12.3 lbs / 5.6 kg each |
| Impedance | 6 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner) | 6 ohms nominal |
| Frequency Response | 52Hz - 20kHz (±3dB, manufacturer specified); -6dB to 40Hz | 50Hz - 23kHz (+/-3dB) (Manufacturer specified) |
| Bass Extension (-3dB) | 61Hz (measured, Erin’s Audio Corner) | 78Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 60Hz (measured, Audio Science Review) |
| Crossover Frequency | 940Hz, 4.6kHz | - |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- ELAC BS U5 vs Dynaudio X14
- KEF LS50 Meta vs Totem Kin One
- ELAC BS U5 vs Q Acoustics 5020
- Dynaudio Emit M10 vs Dynaudio X14
- Philharmonic Ceramic Mini vs Wharfedale Super Denton
The Two Speakers In Full
Wharfedale Super Denton: $1499 Crutchfield
Pros: A 3-way design with a 1” soft dome tweeter, a 2” soft dome midrange offset to the side of a centered 6.5” woven Kevlar woofer - a more compact alternative to Wharfedale’s own Linton 85 with a similar overall character. Measured sensitivity around 86.6-87dB with on-axis linearity within about ±3dB. No cabinet or box resonances turned up in impedance testing, and there are no spike feet to install. Harmonic distortion looks good at both 86dB and 96dB, with about 20dB of usable dynamic range up to 96dB before compression starts to affect the midrange more noticeably near 102dB. Because bass rolls off starting around 60Hz, placing it closer to a wall (about 1-2 feet) than usual boosts low-end punch without the midbass bloat a deeper-extending speaker would get from the same placement. In the reviewer’s own comparison, its estimated in-room response actually measured more linear than the pricier Linton 85’s, despite being a bit less linear on-axis.
Cons: A mid-range scoop from about 200-800Hz and a separate upper-midrange scoop were both audible in direct ABX comparison against a reference-neutral speaker, giving aggressive-sounding material a more subdued character. A resonance around 660-700Hz shows up in measurement, though the reviewer couldn’t reliably hear it with real music in his own blind-ish A/B testing. The offset tweeter-and-midrange layout makes horizontal off-axis response noticeably asymmetric - response drops as much as 8dB more to one side than the other at wider angles - so the reviewer recommends aiming the speakers directly at the listener (not toed out, which loses upper treble) and suggests sidewall absorption to control uneven reflections. Must be listened to with the grille on - measurements are noticeably worse with it off (wider 2-4kHz dip, extra treble bump). Horizontal soundstage width felt a bit narrower than the reviewer personally prefers, likely related to the same offset driver layout. Multitone distortion gets high in the midrange at 96dB/1m, a concern mainly in larger rooms where you’d need to play louder.
Full Wharfedale Super Denton review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 61Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 940Hz, 4.6kHz |
| Dimensions | 14.2"H x 9.7"W x 10.8"D (360 x 246 x 275 mm) |
| Drivers | 1" soft dome tweeter, 2" soft dome midrange, 6.5" woven Kevlar woofer |
| Frequency Response | 52Hz - 20kHz (±3dB, manufacturer specified); -6dB to 40Hz |
| Impedance | 6 ohms nominal, 3 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 86.6dB (measured by Erin's Audio Corner) |
| Weight | 20.3 lbs / 9.2 kg (20.2 lbs) each |
| Woofer Cabinet | ported |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Wharfedale Super Denton vs Klipsch RP-500M II
- Wharfedale Super Denton vs Wharfedale Diamond 12.1
- Wharfedale Super Denton vs Revel M105
- Wharfedale Super Denton vs Arendal 1961 Monitor
- Wharfedale Super Denton vs KEF Q150
- Wharfedale Super Denton vs KEF LS50 Meta
- Wharfedale Super Denton vs Ascend Sierra 1 v2
- Wharfedale Super Denton vs Wharfedale Diamond 220
- See all 15 comparisons
Dynaudio Emit M10: $800
Pros: CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. 28mm soft dome tweeter and 14cm MSP mid/bass driver.
Cons: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange - the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t. His verdict: cheaper speakers deliver much more balanced tonality, so he wouldn’t buy it for himself.
Full Dynaudio Emit M10 review and specifications →
| Bass Extension (-10dB) | 60Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 78Hz (measured, Audio Science Review) |
| Dimensions | 11.5"H x 6.7"W x 9.4"D (292 x 170 x 240 mm) |
| Drivers | 28mm soft dome tweeter, 14cm MSP mid/bass driver |
| Frequency Response | 50Hz - 23kHz (+/-3dB) (Manufacturer specified) |
| Impedance | 6 ohms nominal |
| Sensitivity | 83.5dB (2.83V/1m, measured, Audio Science Review) |
| Weight | 12.3 lbs / 5.6 kg each |
| Woofer Cabinet | ported |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit M10 vs ELAC BS U5
- Dynaudio Emit M10 vs JBL Stage 2 250B
- Dynaudio Emit M10 vs Paradigm Monitor SE Atom
- Dynaudio Emit M10 vs Sony SS-CS5 M2
- Dynaudio Emit M10 vs Dynaudio X14
- Dynaudio Emit M10 vs ELAC Debut 2.0 B5.2
- Dynaudio Emit M10 vs JBL Studio 530
- Dynaudio Emit M10 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
- See all 17 comparisons