Short answer: the Vanatoo Transparent Zero Plus for better sound quality, the Audioengine A5+ Classic for the lower price. The Vanatoo Transparent Zero Plus ranks #14 of 58 powered bookshelf speakers at $499.99. The Audioengine A5+ Classic ranks #38 at $399, $100.99 cheaper.
What the Vanatoo Transparent Zero Plus offers: Genuinely neutral tonal balance in a small desktop-class powered speaker - a rarity in this size and price range, where the reviewer says most competitors have a scooped mid-range, one-note bass, and piercing V-shaped highs. Flexible mounting: flip the cabinet orientation to angle the tweeter up for flat-desktop placement or level for stand-mount ear height. Subwoofer output with auto-sense, so it engages automatically when a sub is connected. Wide input selection - Bluetooth aptX HD, USB (24-bit/96kHz), Toslink, and 3.5mm analog. Distortion stays reasonable (below 3%) up to about 88dB, and multitone distortion at max output (96dB) is the only real weak point. Watch for: An 8th-order Butterworth high-pass at 58Hz sharply limits bass below that point - F3 measures 92Hz and F10 53Hz, so kick drum fundamentals and true low end need a subwoofer. Very sensitive to ear height relative to the tweeter: sitting even slightly above the tweeter axis scoops out the 2-4kHz upper mid-range. Multitone distortion at maximum output (96dB) is high enough to add noticeable vocal graininess - stick closer to 88dB for clean output. The reviewer’s only real gripe is wishing it extended lower, which he acknowledges is an unreasonable ask for a speaker this size.
What the Audioengine A5+ Classic offers: CEA2034 spinorama shows a reasonably flat response outside of the upper bass. Internal Class AB amplification (50W RMS, 75W peak) with a linear power supply drives a 5” Kevlar woofer and 0.75” tweeter. Watch for: A valley in the upper bass (200-400Hz) recesses that range, and a distortion peak shows up around 800-900Hz even at 86dB SPL. Off-axis response doesn’t track the on-axis curve well through the crossover, suggesting the waveguide isn’t fully optimized. Resonances appear at 900Hz and 4.4kHz.
Buy the Vanatoo Transparent Zero Plus if sound quality matters more than the price. Buy the Audioengine A5+ Classic if the price matters more than sound quality.
Specifications Side By Side
| Vanatoo Transparent Zero Plus | Audioengine A5+ Classic | |
|---|---|---|
| Price | $499.99 | $399.00 |
| Ranked | #14 of 58 in Medium Size Powered Bookshelf Speakers | #38 of 58 in Medium Size Powered Bookshelf Speakers |
| Drivers | 4" aluminum cone woofer, 4" long-throw passive radiator, 1" soft dome tweeter | 5" Kevlar woofer, 0.75" silk dome tweeter |
| Output Power | 120W total (Class D) | 50W RMS / 75W peak |
| Inputs | Bluetooth (aptX HD), USB (24-bit/96kHz), Toslink Optical (24-bit/96kHz), 3.5mm Analog | - |
| Dimensions | 8.5"H x 5.5"W x 6"D | 10.9"H x 7.2"W x 9.7"D (276.2 x 182.6 x 247.6 mm) |
| Weight | 7 lbs each | 15.4 lbs / 7 kg (left/powered), 9.7 lbs / 4.4 kg (right) |
| Bass Extension (-3dB) | 92Hz (measured, Erin’s Audio Corner) | 68Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 53Hz (measured, Erin’s Audio Corner) | 50Hz (measured, Audio Science Review) |
| Sensitivity | 88.5dB (measured at 0.3V/1m, Erin’s Audio Corner) | - |
| DSP | Yes (8th-order Butterworth high-pass at 58Hz) | No |
| Frequency Response | - | 50Hz - 22kHz (+/-1.5dB) (Manufacturer specified) |
| App | - | No |
| EQ | - | No |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Edifier S2000MKIII vs Yamaha HS5
- Neumann KH80 DSP vs Yamaha HS5
- Yamaha HS5 vs Edifier S1000W
- Edifier S1000MKII vs Audioengine A5+ Classic
- Vanatoo Transparent Zero Plus vs Edifier R2000DB
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Vanatoo Transparent Zero Plus: $499.99 Amazon eBay
Pros: Genuinely neutral tonal balance in a small desktop-class powered speaker - a rarity in this size and price range, where the reviewer says most competitors have a scooped mid-range, one-note bass, and piercing V-shaped highs. Flexible mounting: flip the cabinet orientation to angle the tweeter up for flat-desktop placement or level for stand-mount ear height. Subwoofer output with auto-sense, so it engages automatically when a sub is connected. Wide input selection - Bluetooth aptX HD, USB (24-bit/96kHz), Toslink, and 3.5mm analog. Distortion stays reasonable (below 3%) up to about 88dB, and multitone distortion at max output (96dB) is the only real weak point.
Cons: An 8th-order Butterworth high-pass at 58Hz sharply limits bass below that point - F3 measures 92Hz and F10 53Hz, so kick drum fundamentals and true low end need a subwoofer. Very sensitive to ear height relative to the tweeter: sitting even slightly above the tweeter axis scoops out the 2-4kHz upper mid-range. Multitone distortion at maximum output (96dB) is high enough to add noticeable vocal graininess - stick closer to 88dB for clean output. The reviewer’s only real gripe is wishing it extended lower, which he acknowledges is an unreasonable ask for a speaker this size.
Full Vanatoo Transparent Zero Plus review and specifications →
| Bass Extension (-10dB) | 53Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 92Hz (measured, Erin's Audio Corner) |
| DSP | Yes (8th-order Butterworth high-pass at 58Hz) |
| Dimensions | 8.5"H x 5.5"W x 6"D |
| Drivers | 4" aluminum cone woofer, 4" long-throw passive radiator, 1" soft dome tweeter |
| Inputs | Bluetooth (aptX HD), USB (24-bit/96kHz), Toslink Optical (24-bit/96kHz), 3.5mm Analog |
| Output Power | 120W total (Class D) |
| Sensitivity | 88.5dB (measured at 0.3V/1m, Erin's Audio Corner) |
| Weight | 7 lbs each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Vanatoo Transparent Zero Plus vs Kali Audio IN-5
- Vanatoo Transparent Zero Plus vs Yamaha HS5
- Vanatoo Transparent Zero Plus vs Adam Audio T5V
- Vanatoo Transparent Zero Plus vs JBL 305P MKII
- Vanatoo Transparent Zero Plus vs Airpulse A100
- Vanatoo Transparent Zero Plus vs KRK Rokit 5 G4
- Vanatoo Transparent Zero Plus vs Presonus Eris E5 XT
- Vanatoo Transparent Zero Plus vs IK Multimedia iLoud MTM MKII
- See all 33 comparisons
Audioengine A5+ Classic: $399.00 Amazon Bhphotovideo eBay
Pros: CEA2034 spinorama shows a reasonably flat response outside of the upper bass. Internal Class AB amplification (50W RMS, 75W peak) with a linear power supply drives a 5” Kevlar woofer and 0.75” tweeter.
Cons: A valley in the upper bass (200-400Hz) recesses that range, and a distortion peak shows up around 800-900Hz even at 86dB SPL. Off-axis response doesn’t track the on-axis curve well through the crossover, suggesting the waveguide isn’t fully optimized. Resonances appear at 900Hz and 4.4kHz.
Full Audioengine A5+ Classic review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 68Hz (measured, Audio Science Review) |
| DSP | No |
| Dimensions | 10.9"H x 7.2"W x 9.7"D (276.2 x 182.6 x 247.6 mm) |
| Drivers | 5" Kevlar woofer, 0.75" silk dome tweeter |
| EQ | No |
| Frequency Response | 50Hz - 22kHz (+/-1.5dB) (Manufacturer specified) |
| Output Power | 50W RMS / 75W peak |
| Weight | 15.4 lbs / 7 kg (left/powered), 9.7 lbs / 4.4 kg (right) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Audioengine A5+ Classic vs Edifier R1280T
- Audioengine A5+ Classic vs Edifier R1280DB
- Audioengine A5+ Classic vs Klipsch The Fives
- Audioengine A5+ Classic vs Focal Alpha 50 EVO
- Audioengine A5+ Classic vs Pioneer DJ VM-50
- Audioengine A5+ Classic vs Vanatoo Transparent One Encore Plus
- Audioengine A5+ Classic vs Dynaudio LYD 5
- Audioengine A5+ Classic vs Edifier MR4
- See all 26 comparisons