Short answer: the DXR8mkII if you want a self-contained box, the NuQ82 if you already have amplification and want the deepest bass in this size class. These rank #3 and #4 out of 15 8-inch powered PA speakers, and the choice mostly comes down to whether you need active electronics built in.
The NuQ82 is passive and coaxial. It needs an external amplifier and crossover to work at all, which its own cons flag directly, but that same passive/bi-amp switchable design gives installers flexibility on amplification and DSP. Vendor data still shows a 5.1 ideal-subwoofer preference score with 52Hz measured extension, the deepest bass reach of any 8-inch box in this ranking, though it comes from low-quality source data. Its 123dB peak claim trails the DXR8mkII.
The DXR8mkII is a self-powered, better-documented performer. Medium-quality vendor data shows a 4.99 ideal-subwoofer preference score with 64Hz measured extension, and it packs Yamaha’s FIR-X processing, a 1.75-inch neodymium compression driver and a 90° x 60° constant-directivity horn into a compact cabinet, along with a 130dB peak claim well above the NuQ82’s. Its own cons note it is the oldest design generation in Yamaha’s lineup here, with no app control or Bluetooth audio.
Everything else matches: neither has Bluetooth, both use 8-inch woofers with a compression driver, and both offer plywood-based cabinet construction with multiple fly points for installed use.
Buy the DXR8mkII if you want a ready-to-run active speaker with strong measured output and don’t already own amplification.
Buy the NuQ82 if you’re building a bi-amped or passive install where you control the amp and crossover, and the deeper measured bass extension matters more than raw peak SPL.
Specifications Side By Side
| Turbosound NuQ82 | Yamaha DXR8mkII | |
|---|---|---|
| Price | $500.00 | $649.00 |
| Ranked | #3 of 15 in 8-Inch Two-Way Powered PA Speakers | #4 of 15 in 8-Inch Two-Way Powered PA Speakers |
| Configuration | Passive/bi-amp switchable 2-way coaxial PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 8" coaxial woofer, compression driver | 8" woofer, 1.75" compression driver |
| Frequency Response | 65Hz - 18kHz (±3dB, manufacturer specified); 55Hz - 20kHz (-10dB) | 57Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 18.3"H x 10.8"W x 8.7"D (464 x 274 x 220 mm) | 18"H x 11"W x 11"D (458 x 280 x 280 mm) |
| Inputs | Two Neutrik speakON NL4 connectors | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Power Handling | 250W continuous / 1,000W peak (IEC, manufacturer specified) | - |
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 250W continuous / 1,000W peak handling rating | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
| Cabinet Material | 12mm birch plywood | Matte-finish ABS |
| Rigging | Eight M10 and three M8 fly points | 3 x M8 points; 35mm dual-angle pole mount |
| Coverage | 100° x 60° | 90° x 60° |
| Maximum SPL | 123dB peak (manufacturer specified) | 130dB peak (manufacturer specified) |
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No | No |
| Weight | 22.5 lbs / 10.2 kg | 28.2 lbs / 12.8 kg |
| DSP | - | Yes |
Related Speaker Comparisons
Other pairings from the same speaker class worth checking:
- QSC K8.2 vs L-Acoustics 108P
- QSC K8.2 vs JBL PRX908
- L-Acoustics 108P vs JBL PRX908
- QSC K8.2 vs Turbosound NuQ82
- L-Acoustics 108P vs Yamaha DXR8mkII
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Turbosound NuQ82: $500.00 B&H Photo Video eBay
Pros: Low-quality vendor data still shows a 5.1 ideal-subwoofer preference score with 52Hz measured extension, the deepest bass reach of any 8-inch box in this ranking. The switchable passive/bi-amp design and coaxial point-source layout give installers flexibility on amplification and DSP.
Cons: Being passive-by-default, it needs an external amplifier and crossover to work at all, and its 123dB peak claim trails every active speaker here.
Full Turbosound NuQ82 review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 250W continuous / 1,000W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12mm birch plywood |
| Configuration | Passive/bi-amp switchable 2-way coaxial PA speaker |
| Coverage | 100° x 60° |
| Dimensions | 18.3"H x 10.8"W x 8.7"D (464 x 274 x 220 mm) |
| Drivers | 8" coaxial woofer, compression driver |
| Frequency Response | 65Hz - 18kHz (±3dB, manufacturer specified); 55Hz - 20kHz (-10dB) |
| Inputs | Two Neutrik speakON NL4 connectors |
| Maximum SPL | 123dB peak (manufacturer specified) |
| Power Handling | 250W continuous / 1,000W peak (IEC, manufacturer specified) |
| Rigging | Eight M10 and three M8 fly points |
| Weight | 22.5 lbs / 10.2 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DXR8mkII: $649.00 Amazon B&H Photo Video Guitar Center eBay
Pros: Medium-quality vendor data shows a 4.99 ideal-subwoofer preference score with 64Hz measured extension, among the strongest results here. Yamaha’s FIR-X processing, a 1.75-inch neodymium compression driver and a 90° x 60° constant-directivity horn carry over the larger DXR models’ engineering into a compact cabinet.
Cons: No mkIII successor exists for this size yet, so it is the oldest design generation in this ranking’s Yamaha lineup, without app control or Bluetooth audio.
Full Yamaha DXR8mkII review and specifications →
| Amplifier Power | 1100W dynamic / 700W continuous (950W LF + 150W HF dynamic) |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Matte-finish ABS |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| DSP | Yes |
| Dimensions | 18"H x 11"W x 11"D (458 x 280 x 280 mm) |
| Drivers | 8" woofer, 1.75" compression driver |
| Frequency Response | 57Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | XLR, dual 1/4-inch, stereo RCA; XLR thru and link outputs |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | 3 x M8 points; 35mm dual-angle pole mount |
| Weight | 28.2 lbs / 12.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons