Short answer: the Triangle Borea BR03. It ranks #109 of 130 bookshelf speakers by sound quality at $399; the ATC SCM19 ranks #119 and costs $3750, so there is little reason to consider the other one.
What the Triangle Borea BR03 offers: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Watch for: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
What the ATC SCM19 offers: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Watch for: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”
Buy the Triangle Borea BR03. It ranks higher for sound quality than the ATC SCM19 and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip both of these and look higher up the 130 bookshelf speakers instead.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Triangle Borea BR03 | ATC SCM19 | |
|---|---|---|
| Price | $399.00 per pair | $3750 per pair |
| Ranked | #109 of 130 in Large Size Bookshelf Speakers | #119 of 130 in Large Size Bookshelf Speakers |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter | 5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter |
| Crossover Frequency | 3600Hz | - |
| Dimensions | 14.96"H x 8.11"W x 12.36"D | 17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm) |
| Weight | 13.2 lbs (6 kg) each | 39.2 lbs (17.8 kg) each |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) | 6 ohms |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) | 85dB (measured, Audio Science Review) |
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) | 60Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) | 34Hz (measured, Audio Science Review) |
| Recommended Power | 100W | - |
| Woofer Cabinet | ported, dual front ports | sealed |
| Spinorama Preference Score | 3.12 | 3.79 |
| Spinorama Preference Score with Perfect Sub | 5.47 | 6.21 |
Related Speaker Comparisons
More top alternatives to Triangle Borea BR03:
- Triangle Borea BR03 vs Perlisten S4b
- Triangle Borea BR03 vs KEF Reference 1 Meta
- Triangle Borea BR03 vs GR-Research NX-Studio
- AsciLab C6B vs Triangle Borea BR03
- Audio First Cadentia 3 vs Triangle Borea BR03
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Triangle Borea BR03: $399.00 per pair Amazon eBay
Pros: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Measured bass extension of 57Hz (-3dB), with a measured sensitivity of 87.5dB.
Cons: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
Full Triangle Borea BR03 review and specifications →
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 3600Hz |
| Dimensions | 14.96"H x 8.11"W x 12.36"D |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) |
| Recommended Power | 100W |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) |
| Spinorama Preference Score | 3.12 |
| Spinorama Preference Score with Perfect Sub | 5.47 |
| Weight | 13.2 lbs (6 kg) each |
| Woofer Cabinet | ported, dual front ports |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Triangle Borea BR03 vs B&W 805S
- Triangle Borea BR03 vs Wharfedale Diamond 9.1
- Triangle Borea BR03 vs Klipsch RP-600M
- Triangle Borea BR03 vs Sonus Faber Lumina II Amator
- Triangle Borea BR03 vs Aperion Audio Verus V8B
- Triangle Borea BR03 vs KEF Q350
- Triangle Borea BR03 vs Sonus Faber Sonetto II G2
- Triangle Borea BR03 vs Emotiva Airmotiv B2+
- See all 51 comparisons
ATC SCM19: $3750 per pair Tmraudio eBay
Pros: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 85dB.
Cons: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”
Full ATC SCM19 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| Dimensions | 17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm) |
| Drivers | 5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter |
| Impedance | 6 ohms |
| Sensitivity | 85dB (measured, Audio Science Review) |
| Spinorama Preference Score | 3.79 |
| Spinorama Preference Score with Perfect Sub | 6.21 |
| Weight | 39.2 lbs (17.8 kg) each |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons