Short answer: the Tin HiFi C5. It ranks #318 of 450 in-ear headphones by sound quality, rated 3.8/5, at $39; the CCA C10 ranks #334, rated 3.7/5, and costs $40.99, so there is little reason to consider the other one.
The case for the CCA C10: Bass reaches all the way to 20 Hz within half a decibel of target on average, with a 3 dB lift from 60 to 200 Hz that gives drums and bass guitar body. The tradeoff: Across nine hobbyist measurements on squig.link a 7.5 dB peak near 8.1 kHz stands out, which can make cymbals and sibilance splashy.
Buy the Tin HiFi C5. It is rated higher for sound quality than the CCA C10 and costs less, so only choose the other one for a particular feature it does better.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Tin HiFi C5 | CCA C10 | |
|---|---|---|
| Price | $39.00 | $40.99 |
| Ranked | #318 of 450 in In-Ear Headphones | #334 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 72 (median of 13 squig.link measurements, calibrated to AutoEQ) | 70 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.05 dB standard deviation | 2.31 dB standard deviation |
| Tonal Tilt | -0.58 (negative is warmer, positive brighter) | -0.40 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.5 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.9 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 flat plate dynamic + 1 balanced armature) | Hybrid (1 dynamic + 4 balanced armature) |
| Drivers | 1 x 10x10mm flat plate dynamic + 1 x balanced armature | 1 x 10mm dynamic + 4 x balanced armature |
| Impedance | 9 ohms | 32 ohms |
| Sensitivity | 101 dB | 108 dB/mW |
| Built-in Microphone | No | - |
| Frequency Response | - | 7Hz - 40kHz (Manufacturer specified) |
Related Headphone Comparisons
More worthwhile head-to-heads for Tin HiFi C5:
- DUNU Titan X vs Tin HiFi C5
- 7Hz G1 vs Tin HiFi C5
- MEE Audio M6 Pro vs Tin HiFi C5
- MEE Audio M6 Pro vs CCA C10
- CCA C10 vs Fatfreq Sakura
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Tin HiFi C5: $39.00 Amazon eBay
Full Tin HiFi C5 review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.05 dB standard deviation |
| Driver Type | Hybrid (1 flat plate dynamic + 1 balanced armature) |
| Drivers | 1 x 10x10mm flat plate dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 72 (median of 13 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 9 ohms |
| Sensitivity | 101 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.5 dB at 30 Hz) |
| Tonal Tilt | -0.58 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
CCA C10: $40.99 Amazon AliExpress eBay
Pros: Bass reaches all the way to 20 Hz within half a decibel of target on average, with a 3 dB lift from 60 to 200 Hz that gives drums and bass guitar body. Its preference score of 70 is solid for an inexpensive hybrid with one dynamic driver and four balanced armatures. At 32 ohms and 108 dB/mW it gets loud from any phone, and listeners who like a warm or V-shaped sound are the natural fit.
Cons: Across nine hobbyist measurements on squig.link a 7.5 dB peak near 8.1 kHz stands out, which can make cymbals and sibilance splashy. A 4.8 dB dip near 3.6 kHz pulls vocals and guitars slightly back. The MEE Audio M6 Pro carries a higher rating at a similar price.
Full CCA C10 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.31 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 70 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.9 dB at 30 Hz) |
| Tonal Tilt | -0.40 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.6 dB | 0.70 |
| Peak | 163 Hz | -3.5 dB | 0.68 |
| Peak | 795 Hz | +3.6 dB | 0.90 |
| Peak | 2,002 Hz | -3.7 dB | 2.10 |
| Peak | 3,348 Hz | +3.9 dB | 4.47 |
| High shelf | 10,000 Hz | +3.9 dB | 0.70 |
| Peak | 6,105 Hz | +3.6 dB | 5.09 |
| Peak | 4,532 Hz | -3.7 dB | 6.00 |
| Peak | 8,636 Hz | +1.0 dB | 4.78 |
| Peak | 5,236 Hz | +1.0 dB | 5.28 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons