Short answer: the Tin HiFi C2. It ranks #39 of 297 in-ear headphones by sound quality, rated 4.6/5, at $59.99. The Tin HiFi C2 2025 ranks #80, rated 4.5/5, at $39, $20.99 cheaper, which does not close the gap in sound quality.
The case for the Tin HiFi C2: Across 15 squig.link measurements it reaches a preference score of 81.6 with a 1.42 dB deviation, close to neutral with a slight warm lean. Watch for: The 10 to 16 kHz air band runs about 5 dB above target with a 6.2 dB peak near 11.9 kHz, which can make cymbals and hi hats sound a bit sharp to treble sensitive ears.
The case for the Tin HiFi C2 2025: The median of 15 squig.link measurements gives it a preference score of 79.3 and a smooth 1.39 dB spread, a strong result from a single 10 mm dynamic driver. Watch for: A 7.7 dB peak near 11.9 kHz can add a hint of tizz to cymbals and hi-hats.
Buy the Tin HiFi C2. It is rated higher for sound quality, and the $20.99 saving on the Tin HiFi C2 2025 is not enough to make up the difference.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Tin HiFi C2 | Tin HiFi C2 2025 | |
|---|---|---|
| Price | $59.99 | $39.00 |
| Ranked | #39 of 297 in In-Ear Headphones | #80 of 297 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 82 (median of 15 squig.link measurements, calibrated to AutoEQ) | 79 (median of 15 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.42 dB standard deviation | 1.39 dB standard deviation |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) | -0.43 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.0 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Impedance | 32 ohms | 32 ohms |
| Sensitivity | 104 dB @ 1kHz 0.179V | 104 dB @ 0.179V |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) | 10Hz - 20kHz (Manufacturer specified) |
Related Headphone Comparisons
More top alternatives to Tin HiFi C2:
- EPZ G10 vs EPZ G30
- EPZ G20 vs EPZ G30
- Moondrop Blessing vs Moondrop Blessing 3
- Sennheiser IE 200 vs Sennheiser IE 4
- Sennheiser IE 200 vs Sony WF-1000XM5
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Tin HiFi C2: $59.99 Amazon eBay
Pros: Across 15 squig.link measurements it reaches a preference score of 81.6 with a 1.42 dB deviation, close to neutral with a slight warm lean. Bass from 60 to 200 Hz is lifted about 1.4 dB for punch while the midrange stays on target, so vocals sound clear and natural. It is rated higher than the Moondrop Lan and the pricier Moondrop Golden Ages 2, and its 32 ohm load runs easily from a phone.
Cons: The 10 to 16 kHz air band runs about 5 dB above target with a 6.2 dB peak near 11.9 kHz, which can make cymbals and hi hats sound a bit sharp to treble sensitive ears. A 3.5 dB dip near 6.5 kHz slightly blunts the leading edge of instruments.
Full Tin HiFi C2 review and specifications →
| Released | Jun 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.42 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 82 (median of 15 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 104 dB @ 1kHz 0.179V |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.0 dB at 30 Hz) |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
Tin HiFi C2 2025: $39.00 Amazon eBay
Pros: The median of 15 squig.link measurements gives it a preference score of 79.3 and a smooth 1.39 dB spread, a strong result from a single 10 mm dynamic driver. Bass rises about 2 dB above target between 60 and 200 Hz with sub-bass right on target, giving a warm, punchy low end that suits bass lovers. Its 32 ohm load is easy for phones and dongles.
Cons: A 7.7 dB peak near 11.9 kHz can add a hint of tizz to cymbals and hi-hats. Presence and lower treble each sit about 1.3 dB under target, with a 4.8 dB dip near 6.3 kHz that slightly softens vocal articulation.
Full Tin HiFi C2 2025 review and specifications →
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.39 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 79 (median of 15 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 104 dB @ 0.179V |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz) |
| Tonal Tilt | -0.43 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples