Sonus Faber Sonetto V G2 vs Sonus Faber Sonetto II G2

Last updated: October 8, 2026

Different classes, so treat this as a step-up-or-not question rather than a head-to-head. The Sonus Faber Sonetto V G2 ranks #166 of 188 floorstanding speakers by sound quality at $7,000; the Sonus Faber Sonetto II G2 ranks #168 of 203 bookshelf speakers by sound quality at $3,500.

Sonus Faber Sonetto V G2 vs Sonus Faber Sonetto II G2

The case for the Sonus Faber Sonetto V G2: A full 3-way Sonetto G2 tower: the 1.1” DAD Arrow Point tweeter, a 6.5” Camelia midrange in its own cork enclosure, and two 6.5” pulp cone woofers (crossovers at 280Hz and 2.5kHz). Watch for: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured Sonetto II G2, which showed an uneven listening window (a 4.25 Spinorama preference score).

The case for the Sonus Faber Sonetto II G2: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Watch for: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully.

Buy the Sonus Faber Sonetto V G2 at $7,000 if you want a floorstanding speaker. Buy the Sonus Faber Sonetto II G2 at $3,500 if you want a bookshelf speaker instead.

Worth knowing: the Sonus Faber Sonetto V G2 has not been measured yet. Its rating is estimated from related models, with a likely range of 2.9 to 3.7, so treat this verdict as provisional.

Looking for alternatives? See the complete Passive Home rankings.

Specifications Side By Side

Sonus Faber Sonetto V G2 Sonus Faber Sonetto II G2
Price$7,000.00 per pair$3500 per pair
Ranked#166 of 188 in Large Size Floorstanding Speakers Estimated#168 of 203 in Large Size Bookshelf Speakers
Drivers1.1” (28mm) DAD Arrow Point tweeter, 6.5” (165mm) Camelia midrange, 2 x 6.5” (165mm) pulp cone woofers1x 6.5” mid-woofer (paper cone), 1x 1.1” (28mm) DAD soft dome tweeter
Frequency Response35Hz - 40kHz -3dB (manufacturer specified)-
Sensitivity89dB (2.83V/1m, manufacturer specified)87dB (measured, Erin’s Audio Corner)
Impedance4 ohms nominal (manufacturer specified)4 ohms nominal (4.2 ohms minimum, measured by Erin’s Audio Corner)
Crossover Frequency280Hz, 2.5kHz-
Woofer Cabinetportedported, front
Dimensions42.6”H x 12.1”W x 20.9”D (1081 x 308 x 530 mm)16.3”H x 8.9”W x 14”D (414.3 x 227.0 x 355.6 mm)
Weight73.6 lbs (33.4 kg) each38.4 lbs (17.4 kg)
DIY KitNoNo
Bass Extension (-10dB)-38Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)-62Hz (measured, Erin’s Audio Corner)
Spinorama Preference Score-4.25
Spinorama Preference Score with Perfect Sub-6.54

More top alternatives to Sonus Faber Sonetto II G2:

Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Sonus Faber Sonetto V G2: $7,000.00 per pair Estimated Audio Advice eBay

Sonus Faber Sonetto V G2 ranking card

Same family: the Sonus Faber Sonetto I G2 (smaller bookshelf, estimated 3/5), the Sonus Faber Sonetto II G2 (larger bookshelf, rated 3.1/5), the Sonus Faber Sonetto III G2 (smaller floorstanding, ranked lower, estimated 3.2/5) and the Sonus Faber Sonetto Center G2 (center, estimated 3/5).

Pros: A full 3-way Sonetto G2 tower: the 1.1” DAD Arrow Point tweeter, a 6.5” Camelia midrange in its own cork enclosure, and two 6.5” pulp cone woofers (crossovers at 280Hz and 2.5kHz). The dedicated midrange improves on the 2-way models’ vocal clarity, and bass reaches 35Hz (-3dB) with 89dB sensitivity.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured Sonetto II G2, which showed an uneven listening window (a 4.25 Spinorama preference score). It is a 4 ohm load and weighs 33.4kg each.

Crossover Frequency280Hz, 2.5kHz
DIY KitNo
Dimensions42.6”H x 12.1”W x 20.9”D (1081 x 308 x 530 mm)
Drivers1.1” (28mm) DAD Arrow Point tweeter, 6.5” (165mm) Camelia midrange, 2 x 6.5” (165mm) pulp cone woofers
Frequency Response35Hz - 40kHz -3dB (manufacturer specified)
Impedance4 ohms nominal (manufacturer specified)
Sensitivity89dB (2.83V/1m, manufacturer specified)
Weight73.6 lbs (33.4 kg) each
Woofer Cabinetported

Sonus Faber Sonetto II G2: $3500 per pair Crutchfield eBay

Sonus Faber Sonetto II G2 ranking card

Older model: the Sonus Faber Sonetto II (ranked lower, rated 3/5).

Same family: the Sonus Faber Sonetto I G2 (smaller bookshelf, estimated 3/5), the Sonus Faber Sonetto III G2 (smaller floorstanding, estimated 3.2/5), the Sonus Faber Sonetto V G2 (larger floorstanding, estimated 3.3/5) and the Sonus Faber Sonetto Center G2 (center, estimated 3/5).

Pros: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range: the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Measured bass extension of 62Hz (-3dB), with a measured sensitivity of 87dB.

Cons: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals (about 1.5-2 feet in an ideal room, more or less depending on your specific room modes) or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.

Bass Extension (-10dB)38Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)62Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions16.3”H x 8.9”W x 14”D (414.3 x 227.0 x 355.6 mm)
Drivers1x 6.5” mid-woofer (paper cone), 1x 1.1” (28mm) DAD soft dome tweeter
Impedance4 ohms nominal (4.2 ohms minimum, measured by Erin’s Audio Corner)
Sensitivity87dB (measured, Erin’s Audio Corner)
Spinorama Preference Score4.25
Spinorama Preference Score with Perfect Sub6.54
Weight38.4 lbs (17.4 kg)
Woofer Cabinetported, front