Short answer: the Yanyin Mahina. Both are rated 3.0/5 for sound quality (#388 and #389 of 450 in-ear headphones), and the Yanyin Mahina costs $551.65 against $559 for the Shanling ME700, and with sound quality even, the cheaper one is the better buy.
Why pick the Shanling ME700: A one dynamic plus four balanced armature hybrid with a preference score of 62 in crinacle’s measurement and a warm leaning balance. The catch: Its response strays about 2.9 dB from target on average, so tonal balance is less even than on higher rated in-ears.
What the Yanyin Mahina does well: A seven driver hybrid with a 10mm dynamic woofer, four balanced armatures and two electrostatic tweeters, tuned dark and relaxed for listeners who dislike bright treble. The tradeoff: Squig.link measurements show presence about 7.3 dB below target with a 10.3 dB dip near 5.4 kHz, so vocals, strings and percussion lose clarity and attack.
Buy the Yanyin Mahina. Both are rated the same for sound quality, and it costs $7.35 less than the Shanling ME700.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Shanling ME700 | Yanyin Mahina | |
|---|---|---|
| Price | $559.00 | $551.65 |
| Ranked | #389 of 450 in In-Ear Headphones | #388 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 62 (measured by crinacle, via AutoEQ) | 62 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.89 dB standard deviation | 2.78 dB standard deviation |
| Tonal Tilt | -0.79 (negative is warmer, positive brighter) | -1.05 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature) | Hybrid (1 dynamic + 4 balanced armature + 2 electrostatic) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature | 1 x 10mm dynamic + 4 x balanced armature + 2 x electrostatic |
| Impedance | 18 ohms | 8 ohms |
| Sensitivity | 106 dB | 118 dB |
| Weight | 0 lbs (6.8 g) | - |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) | 5Hz - 50kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
| Sub-bass Extension | - | Within 6 dB of target down to 20 Hz (-2.8 dB at 30 Hz) |
Related Headphone Comparisons
More top alternatives to Yanyin Mahina:
- HiBy Crystal 6 vs Yanyin Mahina
- Fatfreq Reference Pro SE vs Yanyin Mahina
- Yanyin Mahina vs FiiO FA9
- Yanyin Mahina vs Kinera Skuld
- Shanling ME700 vs Kinera Skuld
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Shanling ME700: $559.00 Apos Audio eBay
Pros: A one dynamic plus four balanced armature hybrid with a preference score of 62 in crinacle’s measurement and a warm leaning balance. At 18 ohms and 106 dB sensitivity it plays loud enough from a phone, and each earpiece weighs just 6.8 g.
Cons: Its response strays about 2.9 dB from target on average, so tonal balance is less even than on higher rated in-ears. The HiBy Crystal 6 earns the same rating for less money.
Full Shanling ME700 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.89 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 62 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 106 dB |
| Tonal Tilt | -0.79 (negative is warmer, positive brighter) |
| Weight | 0 lbs (6.8 g) |
EQ preset to match the Harman target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.1 dB | 0.70 |
| Peak | 174 Hz | -3.9 dB | 0.80 |
| Peak | 5,657 Hz | +6.1 dB | 1.73 |
| Peak | 3,797 Hz | +2.2 dB | 1.06 |
| Peak | 6,643 Hz | -2.1 dB | 2.56 |
| High shelf | 10,000 Hz | +4.9 dB | 0.70 |
| Peak | 1,444 Hz | -2.2 dB | 2.49 |
| Peak | 9,994 Hz | -2.3 dB | 1.67 |
| Peak | 2,291 Hz | +1.6 dB | 3.58 |
| Peak | 695 Hz | +0.8 dB | 1.88 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yanyin Mahina: $551.65 Linsoul eBay
Pros: A seven driver hybrid with a 10mm dynamic woofer, four balanced armatures and two electrostatic tweeters, tuned dark and relaxed for listeners who dislike bright treble. From 60 Hz to 1 kHz it sits within half a decibel of target, so bass and lower mids sound even and natural. At 118 dB sensitivity it plays loud from any phone. It rates above the Audio-Technica ATH-CK2000Ti for less money and matches the InEar StageDiver SD5 for considerably less.
Cons: Squig.link measurements show presence about 7.3 dB below target with a 10.3 dB dip near 5.4 kHz, so vocals, strings and percussion lose clarity and attack. Sub-bass sits about 2.5 dB under target below 60 Hz, softening rumble. The HiBy Crystal 6 earns the same rating for less money.
Full Yanyin Mahina review and specifications →
| Released | Aug 2022 (4 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.78 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature + 2 electrostatic) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature + 2 x electrostatic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 50kHz (Manufacturer specified) |
| Harman Preference Score | 62 (measured by crinacle, via AutoEQ) |
| Impedance | 8 ohms |
| Sensitivity | 118 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.8 dB at 30 Hz) |
| Tonal Tilt | -1.05 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.8 dB | 0.70 |
| Peak | 4,493 Hz | +4.7 dB | 0.21 |
| Peak | 213 Hz | -2.9 dB | 0.77 |
| Peak | 1,633 Hz | -6.5 dB | 1.15 |
| Peak | 9,800 Hz | -0.2 dB | 1.87 |
| High shelf | 10,000 Hz | -3.0 dB | 0.70 |
| Peak | 74 Hz | +0.7 dB | 1.64 |
| Peak | 4,343 Hz | -1.8 dB | 6.00 |
| Peak | 7,760 Hz | +1.3 dB | 2.43 |
| Peak | 132 Hz | -0.5 dB | 2.19 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons


