Short answer: the Sennheiser HD 505. It ranks #20 of 134 over-ear headphones by sound quality, rated 4.3/5, at $199.95; the Sennheiser HD 650 ranks #34, rated 4.1/5, and costs $329.80, so there is not much of a tradeoff to weigh.
Why pick the Sennheiser HD 505: A preference score of 88 in oratory1990’s measurement puts it among the closest to the Harman target, with the midrange from 200 Hz to 6 kHz within about 0.5 dB of target, so vocals and instruments sound natural and unforced. Watch for: Sub-bass under 60 Hz sits about 6 dB below target, so deep synth bass and kick drum weight are thin.
The case for the Sennheiser HD 650: A preference score of 84 and a warm tilt of minus 0.27 give a relaxed, smooth sound, with bass from 60 to 200 Hz, mids and presence all within about 0.6 dB of target. Watch for: Sub-bass is about 7 dB under target and the 6 to 10 kHz treble is nearly 5 dB low, with a 9 dB dip near 9.3 kHz, so cymbals and air sound dull and rumble is missing.
Buy the Sennheiser HD 505. It is rated higher for sound quality than the Sennheiser HD 650 and costs less, so only choose the other one for a particular feature it does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Sennheiser HD 505 | Sennheiser HD 650 | |
|---|---|---|
| Price | $199.95 | $329.80 |
| Ranked | #20 of 134 in Over-Ear Headphones | #34 of 134 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 88 (measured by oratory1990, via AutoEQ) | 84 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 1.85 dB standard deviation | 2.10 dB standard deviation |
| Tonal Tilt | +0.17 (negative is warmer, positive brighter) | -0.27 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Back | Open | Open |
| Driver Type | Dynamic | Dynamic |
| Impedance | 120 ohms | 300 ohms |
| Sensitivity | 107.9 dB SPL/V | 103 dB SPL/V |
| Weight | 0.5 lbs (237 g) | 0.6 lbs (260 g) |
| Frequency Response | 12Hz - 38.5kHz (Manufacturer specified) | 10Hz - 41kHz (Manufacturer specified) |
| Drivers | - | 1 x 42mm dynamic |
Related Headphone Comparisons
How Sennheiser HD 505 compares with other leading options:
- Sennheiser HD 600 vs Sennheiser HD 505
- Sennheiser HD 505 vs Sennheiser HD 599
- Sennheiser HD 505 vs Sennheiser HD 569
- Sennheiser HD 650 vs Sennheiser HD 599
- AKG K701 vs Sennheiser HD 650
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Sennheiser HD 505: $199.95 Amazon eBay
Pros: A preference score of 88 in oratory1990’s measurement puts it among the closest to the Harman target, with the midrange from 200 Hz to 6 kHz within about 0.5 dB of target, so vocals and instruments sound natural and unforced. The 120 ohm impedance and 107.9 dB per volt sensitivity let it run from a decent DAC or portable amp, and at 237 g the open-back design is light.
Cons: Sub-bass under 60 Hz sits about 6 dB below target, so deep synth bass and kick drum weight are thin. A narrow 9 dB dip near 9.9 kHz and treble running about 2.7 dB low soften cymbals and make it a little dark on airy recordings. Being open-back it leaks sound and offers no isolation.
Full Sennheiser HD 505 review and specifications →
| Back | Open |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.85 dB standard deviation |
| Driver Type | Dynamic |
| Form Factor | Over-ear |
| Frequency Response | 12Hz - 38.5kHz (Manufacturer specified) |
| Harman Preference Score | 88 (measured by oratory1990, via AutoEQ) |
| Impedance | 120 ohms |
| Sensitivity | 107.9 dB SPL/V |
| Tonal Tilt | +0.17 (negative is warmer, positive brighter) |
| Weight | 0.5 lbs (237 g) |
EQ preset to match the Harman target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +7.0 dB | 0.70 |
| Peak | 9,030 Hz | +3.9 dB | 2.25 |
| Peak | 84 Hz | -2.7 dB | 0.44 |
| Peak | 560 Hz | +1.1 dB | 1.13 |
| Peak | 1,256 Hz | -1.5 dB | 1.71 |
| High shelf | 10,000 Hz | -2.5 dB | 0.70 |
| Peak | 3,218 Hz | -1.8 dB | 2.89 |
| Peak | 5,479 Hz | -2.6 dB | 4.99 |
| Peak | 4,145 Hz | +2.5 dB | 5.93 |
| Peak | 6,870 Hz | +2.4 dB | 5.70 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Sennheiser HD 650: $329.80 Amazon eBay
Pros: A preference score of 84 and a warm tilt of minus 0.27 give a relaxed, smooth sound, with bass from 60 to 200 Hz, mids and presence all within about 0.6 dB of target. The largest peak in the upper range is just 1.1 dB, so it avoids harshness on vocals and guitars. At 260 g it is fairly light, and it is a good match for listeners who like a warm tonality.
Cons: Sub-bass is about 7 dB under target and the 6 to 10 kHz treble is nearly 5 dB low, with a 9 dB dip near 9.3 kHz, so cymbals and air sound dull and rumble is missing. At 300 ohms it wants a dedicated headphone amp to reach its potential, and the open back leaks sound.
Full Sennheiser HD 650 review and specifications →
| Released | 2003 (23 years ago) |
|---|---|
| Back | Open |
| Connection | Wired |
| Deviation From Target | 2.10 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 42mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 10Hz - 41kHz (Manufacturer specified) |
| Harman Preference Score | 84 (measured by oratory1990, via AutoEQ) |
| Impedance | 300 ohms |
| Sensitivity | 103 dB SPL/V |
| Tonal Tilt | -0.27 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (260 g) |
EQ preset to match the Harman target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.4 dB | 0.70 |
| Peak | 8,800 Hz | +5.1 dB | 1.42 |
| Peak | 118 Hz | -3.1 dB | 0.50 |
| Peak | 37 Hz | +0.7 dB | 3.96 |
| Peak | 3,169 Hz | -1.7 dB | 3.89 |
| High shelf | 10,000 Hz | -2.1 dB | 0.70 |
| Peak | 1,227 Hz | -1.2 dB | 2.53 |
| Peak | 2,055 Hz | +1.2 dB | 3.23 |
| Peak | 587 Hz | +0.4 dB | 1.19 |
| Peak | 5,332 Hz | -1.1 dB | 5.75 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons