Revel Performa4 F345 vs Q Acoustics 5050

Last updated: October 11, 2026

Short answer: the Revel Performa4 F345 if sound quality matters most, the Q Acoustics 5050 if price matters most. The Revel Performa4 F345 ranks #57 of 226 floorstanding speakers, rated 4.4/5, at $4,999.90. The Q Acoustics 5050 ranks #71, rated 4.3/5, at $2,499, $2,500.90 cheaper.

Revel Performa4 F345 vs Q Acoustics 5050

What the Revel Performa4 F345 does well: The smaller Performa4 tower, a 3-way with three 5.25” ceramic composite woofers, a dedicated 5.25” midrange and a 1” ceramic dome tweeter in Revel’s Acoustic Lens waveguide (crossovers at 350Hz and 2.1kHz). The tradeoff: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured Performa3 towers.

What the Q Acoustics 5050 does well: Flagship floorstanding tower in the 5000 Series with dual 6.0-inch C3 Continuous Curved Cone woofers, internal HPE tubes, and P2P bracing. Watch for: Rating estimated based on 5000 series sibling testing.

Buy the Revel Performa4 F345 if sound quality matters more than the price. Buy the Q Acoustics 5050 if the price matters more than sound quality.

About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Revel Performa4 F345 4.0 to 4.7; Q Acoustics 5050 4.1 to 4.5). Treat this verdict as provisional.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

Revel Performa4 F345 Q Acoustics 5050
Price$4,999.90 per pair$2,499.00 per pair
Ranked#57 of 226 in Large Size Floorstanding Speakers Estimated#71 of 226 in Large Size Floorstanding Speakers Estimated
Drivers1” (25mm) Deep Ceramic Composite dome tweeter in Acoustic Lens waveguide, 5.25” (130mm) Deep Ceramic Composite midrange, 3 x 5.25” (130mm) Micro Ceramic Composite woofers1.0” (25mm) decoupled tweeter, 2 x 6.0” (150mm) C3 Continuous Curved Cone woofers
Frequency Response36Hz - 40kHz ±6dB (manufacturer specified)37Hz - 30kHz (-6dB, manufacturer specified)
Sensitivity87dB (2.83V/1m, manufacturer specified)91.8dB (2.83V/1m, manufacturer specified)
Impedance6 ohms nominal (manufacturer specified)6 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Crossover Frequency350Hz, 2.1kHz-
Woofer Cabinetported, rear-
Dimensions40.9”H x 11.9”W x 13.9”D (1038 x 302 x 352 mm)40”H x 11.5”W x 14.8”D (1017 x 293 x 375 mm)
Weight64.2 lbs (29.1 kg) each47.6 lbs (21.6 kg) each
DIY KitNoNo
Bass Extension (-6dB)-37Hz (manufacturer specified)

How Revel Performa4 F345 compares with other leading options:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Revel Performa4 F345: $4,999.90 per pair Estimated Audio Advice eBay

Revel Performa4 F345 ranking card

Same family: the Revel Performa4 M145 (smaller bookshelf, estimated 4.3/5), the Revel Performa4 M146 (larger bookshelf, estimated 4.5/5), the Revel Performa4 F346 (larger floorstanding, ranked higher, estimated 4.5/5) and the Revel Performa4 C245 (center, estimated 4/5). See every Revel Performa generation.

Pros: The smaller Performa4 tower, a 3-way with three 5.25” ceramic composite woofers, a dedicated 5.25” midrange and a 1” ceramic dome tweeter in Revel’s Acoustic Lens waveguide (crossovers at 350Hz and 2.1kHz). Bass reaches 36Hz (-6dB), deep enough for most music without a subwoofer. The Revel F206 it follows measured a 5.51 Spinorama preference score.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured Performa3 towers. Sensitivity is 87dB with a 6 ohm load, so modest receivers can run out of headroom in larger rooms.

ReleasedApr 2026 (6 months ago)
Crossover Frequency350Hz, 2.1kHz
DIY KitNo
Dimensions40.9”H x 11.9”W x 13.9”D (1038 x 302 x 352 mm)
Drivers1” (25mm) Deep Ceramic Composite dome tweeter in Acoustic Lens waveguide, 5.25” (130mm) Deep Ceramic Composite midrange, 3 x 5.25” (130mm) Micro Ceramic Composite woofers
Frequency Response36Hz - 40kHz ±6dB (manufacturer specified)
Impedance6 ohms nominal (manufacturer specified)
Sensitivity87dB (2.83V/1m, manufacturer specified)
Weight64.2 lbs (29.1 kg) each
Woofer Cabinetported, rear

Q Acoustics 5050: $2,499.00 per pair Estimated Amazon eBay

Q Acoustics 5050 ranking card

Same family: the Q Acoustics 5010 (smaller bookshelf, estimated 3.5/5), the Q Acoustics 5020 (larger bookshelf, rated 2.2/5), the Q Acoustics 5040 (smaller floorstanding, ranked lower, rated 4.1/5) and the Q Acoustics 5090 (center, estimated 3.7/5).

Pros: Flagship floorstanding tower in the 5000 Series with dual 6.0-inch C3 Continuous Curved Cone woofers, internal HPE tubes, and P2P bracing. Delivers commanding dynamic headroom, reduced cabinet resonance, and bass response reaching 37Hz (-6dB) with minimal distortion.

Cons: Rating estimated based on 5000 series sibling testing. Minimum impedance dips to 3.0 ohms, requiring an amplifier capable of high peak current.

ReleasedMar 2024 (2 years ago)
Bass Extension (-6dB)37Hz (manufacturer specified)
DIY KitNo
Dimensions40”H x 11.5”W x 14.8”D (1017 x 293 x 375 mm)
Drivers1.0” (25mm) decoupled tweeter, 2 x 6.0” (150mm) C3 Continuous Curved Cone woofers
Frequency Response37Hz - 30kHz (-6dB, manufacturer specified)
Impedance6 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity91.8dB (2.83V/1m, manufacturer specified)
Weight47.6 lbs (21.6 kg) each