Short answer: a tie on sound quality. Both are rated 4.0/5 (#243 and #263 of 450 in-ear headphones) at nearly the same price ($23.99 vs $26.99), so choose on features and fit.

Why pick the KZ ZSN Pro X: The hybrid design with a 10mm dynamic driver and a balanced armature gives bass about 3.6 dB above target at 60 to 200 Hz, which adds punch and warmth for pop and hip hop. Watch for: A 7.2 dB peak near 8.1 kHz and an air band about 5.8 dB above target can make cymbals and s sounds sharp or hissy at higher volume.
Buy the KZ ZSN Pro X or the Letshuoer D02 on features: they are rated the same for sound quality at close to the same price.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| KZ ZSN Pro X | Letshuoer D02 | |
|---|---|---|
| Price | $23.99 | $26.99 |
| Ranked | #243 of 450 in In-Ear Headphones | #263 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 74 (measured by oratory1990, via AutoEQ) | 74 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.09 dB standard deviation | 2.01 dB standard deviation |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) | +0.33 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.1 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-3.4 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature | 1 x 11mm dynamic |
| Impedance | 25 ohms | 26 ohms |
| Sensitivity | 112 dB/mW | 108 dB |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) | 20Hz - 40kHz (Manufacturer specified) |
| Back | Closed | Closed |
Related Headphone Comparisons
More worthwhile head-to-heads for KZ ZSN Pro X:
- 7Hz Salnotes Zero vs KZ ZSN Pro X
- KZ ZSN Pro 2 vs KZ ZSN Pro X
- KZ ZSN Pro X vs 7Hz x Crinacle Zero 2
- KZ ZSN Pro X vs KZ ZSN Pro
- Letshuoer D02 vs 7Hz x Crinacle Zero 2
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
KZ ZSN Pro X: $23.99 Amazon eBay
Pros: The hybrid design with a 10mm dynamic driver and a balanced armature gives bass about 3.6 dB above target at 60 to 200 Hz, which adds punch and warmth for pop and hip hop. A preference score of 74 at an inexpensive price is strong, and the 25 ohm impedance with 112 dB/mW sensitivity makes it easy to drive from a phone. It also suits a warm or v-shaped taste.
Cons: A 7.2 dB peak near 8.1 kHz and an air band about 5.8 dB above target can make cymbals and s sounds sharp or hissy at higher volume. The 3 to 4 kHz region dips about 2.9 dB, so vocals can sound a little distant. It has no wireless features or noise cancelling.
Full KZ ZSN Pro X review and specifications →
| Released | Jul 2020 (6 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.09 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 74 (measured by oratory1990, via AutoEQ) |
| Impedance | 25 ohms |
| Sensitivity | 112 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.1 dB at 30 Hz) |
| Tonal Tilt | -0.17 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.8 dB | 0.70 |
| Peak | 928 Hz | +5.3 dB | 0.66 |
| Peak | 166 Hz | -3.4 dB | 0.67 |
| Peak | 2,193 Hz | -4.4 dB | 0.61 |
| Peak | 3,392 Hz | +6.1 dB | 2.82 |
| High shelf | 10,000 Hz | -4.4 dB | 0.70 |
| Peak | 6,459 Hz | +3.5 dB | 5.25 |
| Peak | 4,968 Hz | -3.5 dB | 5.59 |
| Peak | 4,039 Hz | +1.3 dB | 6.00 |
| Peak | 5,964 Hz | +0.9 dB | 5.91 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Letshuoer D02: $26.99 Letshuoer eBay
Full Letshuoer D02 review and specifications →
| Released | Aug 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.01 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 11mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 74 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 26 ohms |
| Sensitivity | 108 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.4 dB at 30 Hz) |
| Tonal Tilt | +0.33 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons

