Short answer: the MartinLogan Motion F10. Both are rated 3.8/5 for sound quality (#157 and #164 of 226 floorstanding speakers), and the MartinLogan Motion F10 costs $2,239.98 against $2,599.98 for the Klipsch RP-8060FA II, with sound quality a draw, the lower price decides it.
What the Klipsch RP-8060FA II does well: The Klipsch RP-8000F II with a built-in Dolby Atmos up-firing module: two 8” Cerametallic woofers and a horn loaded titanium tweeter, rated from 35Hz at 98dB. Watch for: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers.
What the MartinLogan Motion F10 does well: 3-way floorstander with dedicated 5.5-inch fiberglass midrange and twin 5.5-inch aluminum woofers relieving the Gen2 Folded Motion tweeter of low-end duties. The tradeoff: Frequency response carries an upward treble tilt consistent with the Motion line voicing, resulting in a bright balance that can sound analytical in reflective rooms.
Buy the MartinLogan Motion F10. Both are rated the same for sound quality, and it costs $360 less than the Klipsch RP-8060FA II.
About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Klipsch RP-8060FA II 3.5 to 4.1; MartinLogan Motion F10 3.6 to 4.0). Treat this verdict as provisional.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Klipsch RP-8060FA II | MartinLogan Motion F10 | |
|---|---|---|
| Price | $2,599.98 per pair | $2,239.98 per pair |
| Ranked | #164 of 226 in Large Size Floorstanding Speakers Estimated | #157 of 226 in Large Size Floorstanding Speakers Estimated |
| Bass Extension (-3dB) | 35Hz (manufacturer specified) | 38Hz (manufacturer specified) |
| Drivers | 1x 1” titanium LTS tweeter on hybrid Tractrix horn, 2x 8” Cerametallic woofers, plus 1x 6.5” up-firing Atmos woofer and 1” tweeter | 1” x 1.4” Gen2 Obsidian Folded Motion Tweeter, 5.5” (14cm) woven fiberglass midrange, 2 x 5.5” (14cm) aluminum cone woofers |
| Sensitivity | 98dB (manufacturer specified) | 92dB (2.83V/1m, manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) | 4 ohms nominal |
| Frequency Response | 35Hz - 25kHz (±3dB, manufacturer specified) | 38Hz - 25kHz (+/- 3dB, manufacturer specified) |
| Dimensions | 43.1”H x 10.9”W x 20.8”D (1095 x 276 x 529 mm) | 38.2”H x 11.3”W x 13.5”D (971 x 286 x 343 mm) |
| Weight | 75.6 lbs (34.3 kg) | 50.5 lbs (22.9 kg) each |
| Amplifier Power | 150W RMS continuous (600W peak) | - |
| Enclosure | Bass reflex, MDF, Dolby Atmos enabled | - |
| Crossover Frequency | - | 280Hz, 3000Hz |
| Woofer Cabinet | - | ported, down-firing twin ports |
| DIY Kit | - | No |
Related Speaker Comparisons
More worthwhile head-to-heads for MartinLogan Motion F10:
- PSB Alpha T20 vs MartinLogan Motion F10
- MartinLogan Motion F10 vs SVS Prime Pinnacle
- KLH Model Four vs MartinLogan Motion F10
- MartinLogan Motion F10 vs SVS Prime Tower
- Klipsch RP-8060FA II vs Jamo S7-25F
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-8060FA II: $2,599.98 per pair Estimated Amazon eBay
Same family: the Klipsch RP-500M II (smaller bookshelf, rated 4/5), the Klipsch RP-600M II (larger bookshelf, rated 3.7/5), the Klipsch RP-5000F II (smaller floorstanding, ranked higher, rated 4/5), the Klipsch RP-6000F II (smaller floorstanding, ranked higher, rated 3.9/5), the Klipsch RP-8000F II (smaller floorstanding, ranked higher, rated 3.9/5), the Klipsch RP-404C II (smallest center, rated 3.7/5), the Klipsch RP-500C II (center, rated 3.9/5), the Klipsch RP-504C II (largest center, rated 3.8/5), the Klipsch Reference Premiere RP-500SA II (smaller surround, estimated 3.5/5) and the Klipsch Reference Premiere RP-502S II (larger surround, estimated 3.5/5). See every Klipsch Reference Premiere generation.
Pros: The Klipsch RP-8000F II with a built-in Dolby Atmos up-firing module: two 8” Cerametallic woofers and a horn loaded titanium tweeter, rated from 35Hz at 98dB.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. The horn tweeter can sound forward in bright rooms, and at 34.3 kg each it is heavy.
Full Klipsch RP-8060FA II review and specifications →
| Released | 2022 (4 years ago) |
|---|---|
| Amplifier Power | 150W RMS continuous (600W peak) |
| Bass Extension (-3dB) | 35Hz (manufacturer specified) |
| Dimensions | 43.1”H x 10.9”W x 20.8”D (1095 x 276 x 529 mm) |
| Drivers | 1x 1” titanium LTS tweeter on hybrid Tractrix horn, 2x 8” Cerametallic woofers, plus 1x 6.5” up-firing Atmos woofer and 1” tweeter |
| Enclosure | Bass reflex, MDF, Dolby Atmos enabled |
| Frequency Response | 35Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) |
| Sensitivity | 98dB (manufacturer specified) |
| Weight | 75.6 lbs (34.3 kg) |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
MartinLogan Motion F10: $2,239.98 per pair Estimated Best Buy eBay
Same family: the MartinLogan Motion B10 (bookshelf, rated 3.6/5), the MartinLogan Motion F20 (larger floorstanding, ranked higher, estimated 3.9/5), the MartinLogan Motion C10 (center, estimated 3.7/5) and the MartinLogan Motion MP10 (surround, estimated 3.5/5).
Pros: 3-way floorstander with dedicated 5.5-inch fiberglass midrange and twin 5.5-inch aluminum woofers relieving the Gen2 Folded Motion tweeter of low-end duties. Down-firing twin ports provide smooth low-frequency room coupling down to 38Hz.
Cons: Frequency response carries an upward treble tilt consistent with the Motion line voicing, resulting in a bright balance that can sound analytical in reflective rooms. 4-ohm nominal impedance requires stable amplification.
Full MartinLogan Motion F10 review and specifications →
| Released | Feb 2023 (3 years ago) |
|---|---|
| Bass Extension (-3dB) | 38Hz (manufacturer specified) |
| Crossover Frequency | 280Hz, 3000Hz |
| DIY Kit | No |
| Dimensions | 38.2”H x 11.3”W x 13.5”D (971 x 286 x 343 mm) |
| Drivers | 1” x 1.4” Gen2 Obsidian Folded Motion Tweeter, 5.5” (14cm) woven fiberglass midrange, 2 x 5.5” (14cm) aluminum cone woofers |
| Frequency Response | 38Hz - 25kHz (+/- 3dB, manufacturer specified) |
| Impedance | 4 ohms nominal |
| Sensitivity | 92dB (2.83V/1m, manufacturer specified) |
| Weight | 50.5 lbs (22.9 kg) each |
| Woofer Cabinet | ported, down-firing twin ports |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons