Short answer: the Aalto Speakers Aalto 3 Passive. It ranks #45 of 130 bookshelf speakers by sound quality; the Klipsch RP-600M II ranks #74.
What the Klipsch RP-600M II offers: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Watch for: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
What the Aalto Speakers Aalto 3 Passive offers: The passive version of the same cabinet as Aalto’s Active Pro model, sharing its 26mm aluminum tweeter and 6.5” bass-midrange driver but without the built-in amp module, for buyers who already have their own amplification. Measures a -3dB extension of 56.6Hz with an on-axis deviation of 0.192dB, close to tonally neutral, a well-damped bass-alignment Q of 0.64, and reaches a deeper 34Hz Harman in-room extension estimate. Watch for: Requires an external amplifier (50-250W recommended) that the Active Pro doesn’t, and shares the same review gap: no independent editorial coverage found, only manufacturer-supplied specs, with factory-direct-only sales from Finland.
Buy the Klipsch RP-600M II when the price outweighs sound quality for you, and the Aalto Speakers Aalto 3 Passive when sound quality outweighs the price instead.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Klipsch RP-600M II | Aalto Speakers Aalto 3 Passive | |
|---|---|---|
| Price | $449.99 per pair | €3,490 per pair |
| Ranked | #74 of 130 in Large Size Bookshelf Speakers | #45 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) | - |
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) | - |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) | 9.4"W x 15.7"H x 9.8"D (240 x 400 x 250 mm) |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) | 4 ohms nominal (min 4 ohms @ 18kHz) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) | 83.5dB @ 2.83V/1m |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn | 26mm aluminum dome tweeter, 6.5" long-throw bass-midrange, 8" passive radiator |
| Weight | 13 lbs (5.9 kg) each | 20.7 lbs (9.4 kg) each |
| Woofer Cabinet | ported | - |
| Spinorama Preference Score | 4.75 | 6.11 |
| Spinorama Preference Score with Perfect Sub | 6.88 | 7.74 |
| Enclosure | - | 2-way, passive-radiator loaded, MDF |
| Power Handling | - | 50-250W RMS recommended amplifier power |
| Country | - | Finland |
Related Speaker Comparisons
More worthwhile head-to-heads for Aalto Speakers Aalto 3 Passive:
- Aalto Speakers Aalto 3 Passive vs Perlisten S4b
- KEF Reference 1 Meta vs Aalto Speakers Aalto 3 Passive
- Aalto Speakers Aalto 3 Passive vs GR-Research NX-Studio
- AsciLab C6B vs Aalto Speakers Aalto 3 Passive
- Audio First Cadentia 3 vs Aalto Speakers Aalto 3 Passive
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-600M II: $449.99 per pair Amazon eBay
Pros: Redesigned waveguide extends flush to the baffle edge, reducing diffraction compared to the original RP-600M. Roughly 10-20° wider horizontal radiation than the original, giving more soundstage envelopment while retaining precise imaging. A major step up in overall tonal neutrality compared to the original RP-600M, largely eliminating that model’s midrange resonance issues. Unusually, sounds better with the grille on - the grille smooths out the elevated treble rather than degrading the sound, a rare trait among speakers the reviewer has tested. More refined back-panel hardware, including anodized binding posts and jumper cables for optional bi-amping. Responds well to EQ correction (verified using measurement software and a miniDSP), letting the on-axis response be made genuinely linear. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 86dB.
Cons: On-axis, the treble runs notably hot - even hotter than the original RP-600M in some respects - and needs about 20° of toe-out or the grille installed to sound balanced. Horizontal dispersion is very slightly less linear across angles than the original RP-600M, a minor trade-off for the wider overall radiation pattern. Klipsch’s marketed sensitivity (about 94.5dB) is, like the original, a half-space rating roughly 9dB above the anechoic reality (closer to 85-86dB). In-room bass rolls off around 60Hz in practice, and a 120Hz boost paired with a midrange scoop gives kick drums their “tambour” without real low-end weight - a subwoofer is still recommended. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Toeing the speaker out for better on-axis tonality (rather than using the grille) introduces slightly more diffuse imaging from added sidewall reflections.
Full Klipsch RP-600M II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 70Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 12.5"D (398.8 x 203.2 x 317.5 mm) |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn |
| Impedance | 8 ohms nominal (3.5 ohms minimum above 80Hz, measured by Erin's Audio Corner) |
| Sensitivity | 86dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.75 |
| Spinorama Preference Score with Perfect Sub | 6.88 |
| Weight | 13 lbs (5.9 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: The Truth about Klipsch’s “NEW” Sound. RP-600M Update. More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Klipsch RP-600M II
- GR-Research: We Bought The "NEW" RP-600M II Is KLIPSCH Listening?! More from GR-Research →
- Erin’s Audio Corner: 5 AWESOME SPEAKERS Under $1000 You Won’t Regret
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Klipsch RP-600M II vs Dynaudio Emit 20
- Klipsch RP-600M II vs Aoshida Audio Musician Knight I V2
- Klipsch RP-600M II vs Philharmonic BMR Monitor
- Klipsch RP-600M II vs JBL 708i
- Klipsch RP-600M II vs JBL Studio 630
- Klipsch RP-600M II vs PS Audio Aspen FR5
- Klipsch RP-600M II vs Behringer B2030P
- Klipsch RP-600M II vs Theory Audio sb25
- See all 116 comparisons
Aalto Speakers Aalto 3 Passive: €3,490 per pair Aalto Speakers eBay
Pros: The passive version of the same cabinet as Aalto’s Active Pro model, sharing its 26mm aluminum tweeter and 6.5” bass-midrange driver but without the built-in amp module, for buyers who already have their own amplification. Measures a -3dB extension of 56.6Hz with an on-axis deviation of 0.192dB, close to tonally neutral, a well-damped bass-alignment Q of 0.64, and reaches a deeper 34Hz Harman in-room extension estimate.
Cons: Requires an external amplifier (50-250W recommended) that the Active Pro doesn’t, and shares the same review gap: no independent editorial coverage found, only manufacturer-supplied specs, with factory-direct-only sales from Finland.
Full Aalto Speakers Aalto 3 Passive review and specifications →
| Country | Finland |
|---|---|
| Dimensions | 9.4"W x 15.7"H x 9.8"D (240 x 400 x 250 mm) |
| Drivers | 26mm aluminum dome tweeter, 6.5" long-throw bass-midrange, 8" passive radiator |
| Enclosure | 2-way, passive-radiator loaded, MDF |
| Impedance | 4 ohms nominal (min 4 ohms @ 18kHz) |
| Power Handling | 50-250W RMS recommended amplifier power |
| Sensitivity | 83.5dB @ 2.83V/1m |
| Spinorama Preference Score | 6.11 |
| Spinorama Preference Score with Perfect Sub | 7.74 |
| Weight | 20.7 lbs (9.4 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Aalto Speakers Aalto 3 Passive vs JBL HDI-1600
- Aalto Speakers Aalto 3 Passive vs Perlisten A3m
- Aalto Speakers Aalto 3 Passive vs ELAC Debut 3.0 DB63
- Aalto Speakers Aalto 3 Passive vs Emotiva Airmotiv XB2
- Aalto Speakers Aalto 3 Passive vs Ascend Acoustics Sierra-2EX V2
- Aalto Speakers Aalto 3 Passive vs Philharmonic BMR (v1)
- Aalto Speakers Aalto 3 Passive vs ELAC DBR62
- Aalto Speakers Aalto 3 Passive vs Ascend Acoustics Sierra-LX
- See all 45 comparisons