Short answer: the Klipsch Reference Premiere RP-502S II. It ranks #8 of 11 surround speakers by sound quality, rated 3.5/5, at $549.99; the SVS Prime Elevation ranks #11, rated 3.3/5, at $549. Close enough in price that the sound-quality gap is the deciding factor.
The case for the Klipsch Reference Premiere RP-502S II: A wide dispersion surround with two horn tweeters and two 5.25” Cerametallic woofers on angled baffles, rated at 94dB, so it is very easy to drive. Watch for: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers.
The case for the SVS Prime Elevation: An angled height or surround speaker with the 1” aluminum tweeter and 4.5” woofer of the SVS Prime Satellite, mountable on a wall or ceiling or placed on a main speaker. Watch for: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers.
Buy the Klipsch Reference Premiere RP-502S II. It is rated higher for sound quality, and saving $0.99 with the SVS Prime Elevation does not make up for the sound-quality gap.
About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Klipsch Reference Premiere RP-502S II 3.1 to 3.9; SVS Prime Elevation 3.0 to 3.6). Treat this verdict as provisional.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Klipsch Reference Premiere RP-502S II | SVS Prime Elevation | |
|---|---|---|
| Price | $549.99 per pair | $549.00 per pair |
| Ranked | #8 of 11 in Surround and Height Speakers Estimated | #11 of 11 in Surround and Height Speakers Estimated |
| Bass Extension (-3dB) | 62Hz (manufacturer specified) | 55Hz (manufacturer specified) |
| Drivers | 2x 1” titanium LTS tweeter on 90x90 Tractrix horn, 2x 5.25” Cerametallic woofer | 1x 1” aluminum dome tweeter, 1x 4.5” midwoofer |
| Sensitivity | 94dB (manufacturer specified) | 87dB (manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) | 8 ohms nominal (manufacturer specified) |
| Frequency Response | 62Hz - 25kHz (±3dB, manufacturer specified) | 55Hz - 25kHz (±3dB, manufacturer specified) |
| Dimensions | 14.2”H x 11.9”W x 7.6”D (360 x 303 x 194 mm) | 9.3”H x 5.4”W x 7.9”D (235 x 138 x 200 mm) |
| Weight | 16.8 lbs (7.6 kg) each | 7.7 lbs (3.5 kg) each |
| Amplifier Power | 100W RMS (400W peak) handling | 20-150W recommended |
| Enclosure | Sealed MDF | Ported (rear 1” flared port) |
Related Speaker Comparisons
More worthwhile head-to-heads for Klipsch Reference Premiere RP-502S II:
- SVS Ultra Evolution Elevation vs Klipsch Reference Premiere RP-502S II
- Emotiva Airmotiv XA2 vs Klipsch Reference Premiere RP-502S II
- DALI Sonik On-Wall vs Klipsch Reference Premiere RP-502S II
- Klipsch Reference Premiere RP-500SA II vs Klipsch Reference Premiere RP-502S II
- Klipsch Reference Premiere RP-502S II vs MartinLogan Motion MP10
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch Reference Premiere RP-502S II: $549.99 per pair Estimated Amazon eBay
Same family: the Klipsch RP-500M II (smaller bookshelf, rated 4/5), the Klipsch RP-600M II (larger bookshelf, rated 3.7/5), the Klipsch RP-5000F II (smallest floorstanding, rated 4/5), the Klipsch RP-6000F II (floorstanding, rated 3.9/5), the Klipsch RP-8000F II (floorstanding, rated 3.9/5), the Klipsch RP-8060FA II (largest floorstanding, estimated 3.8/5), the Klipsch RP-404C II (smallest center, rated 3.7/5), the Klipsch RP-500C II (center, rated 3.9/5), the Klipsch RP-504C II (largest center, rated 3.8/5) and the Klipsch Reference Premiere RP-500SA II (smaller surround, ranked higher, estimated 3.5/5). See every Klipsch Reference Premiere generation.
Pros: A wide dispersion surround with two horn tweeters and two 5.25” Cerametallic woofers on angled baffles, rated at 94dB, so it is very easy to drive.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. It is wall mount only and rated from 62Hz, so it is not a main speaker.
Full Klipsch Reference Premiere RP-502S II review and specifications →
| Released | 2022 (4 years ago) |
|---|---|
| Amplifier Power | 100W RMS (400W peak) handling |
| Bass Extension (-3dB) | 62Hz (manufacturer specified) |
| Dimensions | 14.2”H x 11.9”W x 7.6”D (360 x 303 x 194 mm) |
| Drivers | 2x 1” titanium LTS tweeter on 90x90 Tractrix horn, 2x 5.25” Cerametallic woofer |
| Enclosure | Sealed MDF |
| Frequency Response | 62Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) |
| Sensitivity | 94dB (manufacturer specified) |
| Weight | 16.8 lbs (7.6 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
- Klipsch Reference Premiere RP-502S II vs Klipsch Reference Premiere RP-500SA II
- Klipsch Reference Premiere RP-502S II vs MartinLogan Motion MP10
- Klipsch Reference Premiere RP-502S II vs DALI Sonik On-Wall
- Klipsch Reference Premiere RP-502S II vs KEF Q8 Meta
- Klipsch Reference Premiere RP-502S II vs Emotiva Airmotiv XA2
- Klipsch Reference Premiere RP-502S II vs SVS Ultra Evolution Elevation
SVS Prime Elevation: $549.00 per pair Estimated Amazon eBay
Same family: the SVS Prime Satellite (smaller bookshelf, estimated 3.3/5), the SVS Prime Bookshelf (larger bookshelf, rated 3.5/5), the SVS Prime Tower (smaller floorstanding, estimated 3.6/5), the SVS Prime Pinnacle (larger floorstanding, estimated 3.8/5) and the SVS Prime Center (center, rated 3.4/5).
Pros: An angled height or surround speaker with the 1” aluminum tweeter and 4.5” woofer of the SVS Prime Satellite, mountable on a wall or ceiling or placed on a main speaker.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. Rated from 55Hz, so it relies on a subwoofer.
Full SVS Prime Elevation review and specifications →
| Released | Nov 2016 (9 years ago) |
|---|---|
| Amplifier Power | 20-150W recommended |
| Bass Extension (-3dB) | 55Hz (manufacturer specified) |
| Dimensions | 9.3”H x 5.4”W x 7.9”D (235 x 138 x 200 mm) |
| Drivers | 1x 1” aluminum dome tweeter, 1x 4.5” midwoofer |
| Enclosure | Ported (rear 1” flared port) |
| Frequency Response | 55Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) |
| Sensitivity | 87dB (manufacturer specified) |
| Weight | 7.7 lbs (3.5 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons