Short answer: the KLH Model Four. It ranks #161 of 226 floorstanding speakers by sound quality, rated 3.8/5, at $1,999.98; the KEF Q7 Meta ranks #176, rated 3.5/5, at $1,999.98. With prices this close, go by the sound-quality ranking rather than the cost.
The case for the KLH Model Four: A slim floorstanding member of KLH’s Model collection, with an 8” woofer and the same 4” midrange and 1” aluminum tweeter as the measured KLH Model Five (4.76 Spinorama preference score). The tradeoff: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured KLH Model Five.
What the KEF Q7 Meta does well: 3-way bass reflex floorstanding tower with 12th-generation Uni-Q driver array (0.75-inch vented aluminum dome with Metamaterial Absorption Technology and 4-inch aluminum midrange) coupled with dual 6.5-inch hybrid aluminum woofers. Watch for: 4 ohm nominal impedance with a 3.2 ohm minimum dip means it draws significant amplifier current, and the rear bass-reflex port requires at least 30-50cm of wall clearance.
Buy the KLH Model Four. It is rated higher for sound quality than the KEF Q7 Meta at the same price, so only choose the other one for a particular feature it does better.
About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: KLH Model Four 3.4 to 4.1; KEF Q7 Meta 3.3 to 3.7). Treat this verdict as provisional.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| KLH Model Four | KEF Q7 Meta | |
|---|---|---|
| Price | $1,999.98 per pair | $1,999.98 per pair |
| Ranked | #161 of 226 in Large Size Floorstanding Speakers Estimated | #176 of 226 in Large Size Floorstanding Speakers Estimated |
| Bass Extension (-3dB) | 46Hz (manufacturer specified) | 46Hz (manufacturer specified) |
| Drivers | 1” aluminum dome tweeter, 4” pulp paper midrange, 8” pulp paper woofer | 0.75” vented aluminum dome with MAT tweeter, 4” aluminum midrange, dual 6.5” hybrid aluminum woofers |
| Frequency Response | 46Hz - 20kHz ±3dB (manufacturer specified) | 46Hz - 20kHz (±3dB) (manufacturer specified) |
| Sensitivity | 85dB free-field, 88dB in-room (2.83V/1m, manufacturer specified) | 87dB (2.83V/1m, manufacturer specified) |
| Impedance | 6 ohms nominal, 3.5 ohms minimum (manufacturer specified) | 4 ohms nominal (3.2 ohms minimum, manufacturer specified) |
| Bass Extension (-10dB) | 35Hz (manufacturer specified) | - |
| Crossover Frequency | 380Hz, 2.5kHz | - |
| Woofer Cabinet | sealed | - |
| Weight | 47 lbs (21.3 kg) each (with stand) | 40.6 lbs (18.4 kg) each |
| DIY Kit | No | - |
| Enclosure | - | ported, rear |
| Dimensions | - | 39.4”H x 12.5”W x 12.4”D (1001 x 317 x 315 mm) |
| Cabinet Color | - | Satin Black, Satin White, Walnut |
| Country | - | United Kingdom |
Related Speaker Comparisons
How KLH Model Four compares with other leading options:
- KLH Model Four vs SVS Prime Pinnacle
- KLH Model Four vs MartinLogan Motion F10
- KLH Model Four vs Paradigm Monitor SE 8000F
- Paradigm Monitor SE 8000F vs KEF Q7 Meta
- KEF Q7 Meta vs Triangle Borea BR09
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KLH Model Four: $1,999.98 per pair Estimated Amazon eBay
Same family: the KLH Model Three (bookshelf, estimated 3.8/5), the KLH Model Five (larger floorstanding, ranked higher, rated 4/5) and the KLH Model Seven (larger floorstanding, ranked higher, estimated 4/5).
Pros: A slim floorstanding member of KLH’s Model collection, with an 8” woofer and the same 4” midrange and 1” aluminum tweeter as the measured KLH Model Five (4.76 Spinorama preference score). The sealed cabinet is only 210mm deep and can sit 6 inches from a wall. KLH rates it 46Hz to 20kHz (±3dB) and 35Hz at -10dB.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the measured KLH Model Five. Free-field sensitivity is 85dB and the impedance falls to 3.5 ohms at 120Hz, so it needs more amplifier power than its size suggests.
Full KLH Model Four review and specifications →
| Bass Extension (-10dB) | 35Hz (manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 46Hz (manufacturer specified) |
| Crossover Frequency | 380Hz, 2.5kHz |
| DIY Kit | No |
| Drivers | 1” aluminum dome tweeter, 4” pulp paper midrange, 8” pulp paper woofer |
| Frequency Response | 46Hz - 20kHz ±3dB (manufacturer specified) |
| Impedance | 6 ohms nominal, 3.5 ohms minimum (manufacturer specified) |
| Sensitivity | 85dB free-field, 88dB in-room (2.83V/1m, manufacturer specified) |
| Weight | 47 lbs (21.3 kg) each (with stand) |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons
KEF Q7 Meta: $1,999.98 per pair Estimated Amazon KEF eBay
Same family: the KEF Q1 Meta (smallest bookshelf, rated 3.6/5), the KEF Q4 Meta (bookshelf, estimated 3.4/5), the KEF Q3 Meta (bookshelf, rated 3.4/5), the KEF Q Concerto Meta (largest bookshelf, rated 4.6/5), the KEF Q11 Meta (larger floorstanding, ranked higher, rated 4/5), the KEF Q6 Meta (center, rated 3.9/5) and the KEF Q8 Meta (surround, rated 3.4/5). See every KEF Q Series generation.
Pros: 3-way bass reflex floorstanding tower with 12th-generation Uni-Q driver array (0.75-inch vented aluminum dome with Metamaterial Absorption Technology and 4-inch aluminum midrange) coupled with dual 6.5-inch hybrid aluminum woofers. Rates 46Hz to 20kHz (±3dB), extends to 28Hz in-room (-6dB), and features low distortion (<1% from 38Hz to 20kHz at 90dB).
Cons: 4 ohm nominal impedance with a 3.2 ohm minimum dip means it draws significant amplifier current, and the rear bass-reflex port requires at least 30-50cm of wall clearance.
Full KEF Q7 Meta review and specifications →
| Released | Oct 2024 (2 years ago) |
|---|---|
| Bass Extension (-3dB) | 46Hz (manufacturer specified) |
| Cabinet Color | Satin Black, Satin White, Walnut |
| Country | United Kingdom |
| Dimensions | 39.4”H x 12.5”W x 12.4”D (1001 x 317 x 315 mm) |
| Drivers | 0.75” vented aluminum dome with MAT tweeter, 4” aluminum midrange, dual 6.5” hybrid aluminum woofers |
| Enclosure | ported, rear |
| Frequency Response | 46Hz - 20kHz (±3dB) (manufacturer specified) |
| Impedance | 4 ohms nominal (3.2 ohms minimum, manufacturer specified) |
| Sensitivity | 87dB (2.83V/1m, manufacturer specified) |
| Weight | 40.6 lbs (18.4 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons


