Kinera Freya 2.0 vs Shuoer Cadenza 4

Last updated: October 11, 2026

Short answer: the Shuoer Cadenza 4. Both are rated 4.6/5 for sound quality (#48 and #49 of 450 in-ear headphones), and the Shuoer Cadenza 4 costs $249 against $269 for the Kinera Freya 2.0, and with sound quality even, the cheaper one is the better buy.

Kinera Freya 2.0 vs Shuoer Cadenza 4

Why pick the Kinera Freya 2.0: Six hobbyist measurements on squig.link give it a preference score of 81.2 and a smooth 1.31 dB deviation. Watch for: The air band above 10 kHz falls about 3.4 dB short, with a 4.8 dB dip near 10.7 kHz, so recordings lose a little openness and shimmer.

Why pick the Shuoer Cadenza 4: The median of 23 squig.link measurements scores it 81.2 for preference with 1.4 dB of deviation, a consistent result across many units. Watch for: Presence between 3 and 6 kHz falls about 3.9 dB below target, which dulls the leading edge of voices and snare.

Buy the Shuoer Cadenza 4. Both are rated the same for sound quality, and it costs $20 less than the Kinera Freya 2.0.

Want more options? Browse the full Headphones rankings.

Specifications Side By Side

Kinera Freya 2.0 Shuoer Cadenza 4
Price$269.00$249.00
Ranked#49 of 450 in In-Ear Headphones#48 of 450 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
Harman Preference Score81 (median of 6 squig.link measurements, calibrated to AutoEQ)81 (median of 23 squig.link measurements, calibrated to AutoEQ)
Deviation From Target1.31 dB standard deviation1.40 dB standard deviation
Tonal Tilt-0.09 (negative is warmer, positive brighter)+0.04 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-2.0 dB at 30 Hz)
ConnectionWiredWired
Driver TypeHybrid (1 dynamic + 3 balanced armature)Hybrid (1 dynamic + 3 balanced armature)
Drivers1 x 7mm dynamic + 3 x balanced armature1 x 10mm dynamic + 3 x balanced armature
Impedance20 ohms15 ohms
Sensitivity105 dB102 dB
Weight0 lbs (3.6 g) per earbud-
Frequency Response20Hz - 50kHz (Manufacturer specified)20Hz - 40kHz (Manufacturer specified)
Built-in MicrophoneNo-

More top alternatives to Shuoer Cadenza 4:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Kinera Freya 2.0: $269.00 Amazon eBay

Kinera Freya 2.0 ranking card

Pros: Six hobbyist measurements on squig.link give it a preference score of 81.2 and a smooth 1.31 dB deviation. Bass sits about 1.6 dB above target while the mids stay within a fraction of a decibel, so it sounds warm and full without clouding vocals. At 3.6 g per earbud it is light, and 20 ohms with 105 dB sensitivity runs fine from a phone.

Cons: The air band above 10 kHz falls about 3.4 dB short, with a 4.8 dB dip near 10.7 kHz, so recordings lose a little openness and shimmer. A 4.6 dB peak near 8.1 kHz can emphasize sibilance on some vocals.

BackClosed
Built-in MicrophoneNo
ConnectionWired
Deviation From Target1.31 dB standard deviation
Driver TypeHybrid (1 dynamic + 3 balanced armature)
Drivers1 x 7mm dynamic + 3 x balanced armature
Form FactorIn-ear
Frequency Response20Hz - 50kHz (Manufacturer specified)
Harman Preference Score81 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance20 ohms
Sensitivity105 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz)
Tonal Tilt-0.09 (negative is warmer, positive brighter)
Weight0 lbs (3.6 g) per earbud

Shuoer Cadenza 4: $249.00 Amazon eBay

Shuoer Cadenza 4 ranking card

Pros: The median of 23 squig.link measurements scores it 81.2 for preference with 1.4 dB of deviation, a consistent result across many units. A dynamic driver and three balanced armatures deliver bass within about 2 dB of target at 30 Hz and a low mid lift near 1 dB that fills out vocals and piano. Treble from 6 to 16 kHz lands within half a dB of target on average, so the top end sounds natural rather than tilted.

Cons: Presence between 3 and 6 kHz falls about 3.9 dB below target, which dulls the leading edge of voices and snare. A 5.5 dB peak at 8.1 kHz next to a 5.1 dB dip at 11.5 kHz makes the treble a little uneven, and at 15 ohms and 102 dB it can pick up hiss from noisy sources.

ReleasedApr 2024 (2 years ago)
BackClosed
ConnectionWired
Deviation From Target1.40 dB standard deviation
Driver TypeHybrid (1 dynamic + 3 balanced armature)
Drivers1 x 10mm dynamic + 3 x balanced armature
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score81 (median of 23 squig.link measurements, calibrated to AutoEQ)
Impedance15 ohms
Sensitivity102 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.0 dB at 30 Hz)
Tonal Tilt+0.04 (negative is warmer, positive brighter)