Short answer: the Kinera Celest Pandamon 2.0. It ranks #995 of 1291 in-ear headphones by sound quality, rated 3.0/5, at $39.99; the Soundpeats Air5 Pro ranks #1024, rated 2.9/5, and costs $42.98, so there is little reason to consider the other one.
Why pick the Kinera Celest Pandamon 2.0: A 10mm planar driver is unusual at this low price, and the 9 ohm, 108 dB design plays loud from any phone or laptop. The tradeoff: Hobbyist measurements put its preference score at 62, with a 10.3 dB dip near 6 kHz and treble about 5 dB short of target, so cymbals, consonants and room ambience sound muted.
The case for the Soundpeats Air5 Pro: Bass sits close to target and holds down to 20 Hz, so low end sounds full without bloat. Watch for: Presence sits about 6.6 dB low with an 8.7 dB dip near 5.4 kHz, so vocals and instruments lose some bite.
Buy the Kinera Celest Pandamon 2.0. It is rated higher for sound quality than the Soundpeats Air5 Pro and costs less, which makes it the one to get unless you need something the other one does better.
Still deciding? The full Headphones rankings cover every ranked option.
A 10mm planar driver is unusual at this low price, and the 9 ohm, 108 dB design plays loud from any phone or laptop.
Amazon $39.99 eBay
Bass sits close to target and holds down to 20 Hz, so low end sounds full without bloat.
Amazon $42.98 eBayPrices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| Kinera Celest Pandamon 2.0 | Soundpeats Air5 Pro | |
|---|---|---|
| Price | $39.99 | $42.98 |
| Ranked | #995 of 1291 in In-Ear Headphones | #1024 of 1291 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 62 (median of 6 squig.link measurements, calibrated to AutoEQ) | 60 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 3.27 dB standard deviation | 2.93 dB standard deviation |
| Tonal Tilt | -0.16 (negative is warmer, positive brighter) | -0.92 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-5.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.3 dB at 30 Hz) |
| Connection | Wired | True wireless |
| Driver Type | Planar magnetic | Dynamic |
| Drivers | 1 x 10mm planar magnetic | 1 x 10mm dynamic |
| Impedance | 9 ohms | - |
| Sensitivity | 108 dB | - |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 20Hz - 40kHz |
| Built-in Microphone | No | - |
| Weight | - | 0 lbs (4.8g) per earbud |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the Kinera Celest Pandamon 2.0 from aftersound, bedrock, dvewlsh, mmagtech, pw and silicagel; the Soundpeats Air5 Pro from atechreviews, boizoff, dhrme, fahryst, hobbytalk, kazi, koi, practiphile, pw, regancipher and tonedeafmonk, all via squig.link.
Related Headphone Comparisons
More worthwhile head-to-heads for Kinera Celest Pandamon 2.0: