Short answer: the Revel F228Be, if you are buying new. The KEF Reference 203 ranks higher than it (#12 vs #17 of 74 floorstanding speakers, 4.6/5 vs 4.5/5) but is discontinued, so only consider it used; the Revel F228Be is still sold new at $9,000.
Buy the Revel F228Be, since the KEF Reference 203 is discontinued and only worth hunting down used.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| KEF Reference 203 | Revel F228Be | |
|---|---|---|
| Price | $5,000 per pair Discontinued | $9,000 per pair |
| Ranked | #12 of 74 in Large Size Floorstanding Speakers | #17 of 74 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 37Hz (measured, Erin’s Audio Corner) | 25Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 51Hz (measured, Erin’s Audio Corner) | 61Hz (measured, Audio Science Review) |
| Dimensions | 42”H (1067H mm) | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) |
| Impedance | 8 ohms nominal (3.6 ohms minimum, measured, Erin’s Audio Corner; 3.2 ohms per manufacturer spec) | 8 ohms |
| Sensitivity | 88dB (2.83V/1m, measured by Erin’s Audio Corner) | 89.3dB (300Hz-3kHz @ 2.83V/1m, measured by Audio Science Review; 90dB manufacturer specified) |
| Drivers | 1x 0.75” supertweeter, coaxial 1” dome tweeter + 6.5” midrange, 2x 6.5” woofers | Dual 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofers, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter |
| Weight | 58 lbs (26.3 kg) | 112.4 lbs (51 kg) each |
| Woofer Cabinet | Bass reflex, with switchable flat/cut/lifted bass ports for wall placement | ported, front |
| Crossover Frequency | 400Hz, 2.7kHz, 15kHz | - |
| Frequency Response | 55Hz - 55kHz ±3dB (Manufacturer specified) | - |
| Recommended Power | 50-200W | - |
| Spinorama Preference Score | 5.83 | 6.01 |
| Spinorama Preference Score with Perfect Sub | 7.84 | 7.51 |
| DIY Kit | No | No |
Related Speaker Comparisons
How KEF Reference 203 compares with other leading options:
- KEF Blade Two Meta vs KEF Reference 203
- MoFi SourcePoint 888 vs KEF Reference 203
- Revel F328Be vs KEF Reference 203
- KEF R5 Meta vs KEF Reference 203
- Revel F226Be vs KEF Reference 203
Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF Reference 203: $5,000 per pair Discontinued eBay
Newer model: the KEF Reference 3 Meta, ranked lower, rated 4.6/5.
Pros: An unusually accomplished 4-way design for its era: excellent on-axis linearity (within about +/-3dB), genuinely good directivity both horizontally (~55 degrees) and vertically (~40-50 degrees), and an estimated in-room response that closely matches what the reviewer actually heard. Distortion is excellent: under 1% harmonic above 80Hz at both 86dB and 96dB, and multitone stays around 1% even at 96dB. Bass reaches a real F3 of 51Hz (F10 37Hz), with in-room extension into the low-mid-40s. The reviewer’s overall listening notes were essentially “nothing stood out bad or good”: a genuinely neutral, accurate speaker with a distinctive rounded-baffle look that avoids the diffraction issues a flat baffle this wide would normally have. Measured bass extension of 51Hz (-3dB), with a measured sensitivity of 88dB.
Cons: This is a 20+ year old, long-discontinued speaker only findable secondhand (Facebook Marketplace, Craigslist, audio forums): condition, driver matching, and component aging vary by unit, so audition before buying if at all possible. Demands a robust amplifier: impedance dips to about 3.6 ohms with an EPDR of 2.2 ohms. The small supertweeter shows minor breakup artifacts at the extremes of the vertical polar plot and some compression at very high output in the top octave, though neither was audible in normal listening.
Full KEF Reference 203 review and specifications →
| Bass Extension (-10dB) | 37Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 51Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 400Hz, 2.7kHz, 15kHz |
| DIY Kit | No |
| Dimensions | 42”H (1067H mm) |
| Drivers | 1x 0.75” supertweeter, coaxial 1” dome tweeter + 6.5” midrange, 2x 6.5” woofers |
| Frequency Response | 55Hz - 55kHz ±3dB (Manufacturer specified) |
| Impedance | 8 ohms nominal (3.6 ohms minimum, measured, Erin’s Audio Corner; 3.2 ohms per manufacturer spec) |
| Recommended Power | 50-200W |
| Sensitivity | 88dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Spinorama Preference Score | 5.83 |
| Spinorama Preference Score with Perfect Sub | 7.84 |
| Weight | 58 lbs (26.3 kg) |
| Woofer Cabinet | Bass reflex, with switchable flat/cut/lifted bass ports for wall placement |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Revel F228Be: $9,000 per pair Crutchfield eBay
Older model: the Revel F208 (ranked higher, rated 4.5/5).
Pros: CEA2034 spinorama shows an essentially flat on-axis response with very nice directivity. Predicted in-room response is nearly perfect, with a smooth slope down from bass to treble. Horizontal beamwidth of about ±70 degrees is wide and holds up well until narrowing above 8kHz. Vertical directivity offers more degrees of listening-height freedom than a typical bookshelf design, a benefit of this tower’s driver layout. Distortion is extremely low across the full audio range at 86dB SPL/1m and stays comfortable even at 96dB SPL/1m. Near-field measurements of the individual drivers show nice, well-integrated crossover behavior with only low-level resonances. Measured bass extension of 61Hz (-3dB), with a measured sensitivity of 89.3dB.
Cons: Minimum impedance dips to 3.4 ohms with a secondary rise around 2kHz, calling for an amplifier comfortable with a demanding load. Very expensive and very heavy (51 kg each).
Full Revel F228Be review and specifications →
| Bass Extension (-10dB) | 25Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 61Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) |
| Drivers | Dual 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofers, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter |
| Impedance | 8 ohms |
| Sensitivity | 89.3dB (300Hz-3kHz @ 2.83V/1m, measured by Audio Science Review; 90dB manufacturer specified) |
| Spinorama Preference Score | 6.01 |
| Spinorama Preference Score with Perfect Sub | 7.51 |
| Weight | 112.4 lbs (51 kg) each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons