KEF Q Concerto Meta vs MoFi SourcePoint 10

Last updated: August 9, 2026

Short answer: the KEF Q Concerto Meta. It ranks #7 of 47 bookshelf speakers at $1399.99; the MoFi SourcePoint 10 ranks #8 and costs $3500, so there is not much of a tradeoff to weigh.

The case for the KEF Q Concerto Meta: Really good in-room neutrality with consistent horizontal directivity from seat to seat. Set against that: Radiation pattern measures about ±50°, narrower than the reviewer’s preferred ±60° for a stronger sense of envelopment.

What the MoFi SourcePoint 10 gets right: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s. The tradeoff: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate.

Buy the KEF Q Concerto Meta if the ranking matters more than the price. Buy the MoFi SourcePoint 10 if the price matters more than the ranking.

Specifications Side By Side

KEF Q Concerto Meta MoFi SourcePoint 10
Price$1,399.99$3500
Ranked#7 of 47 in Large Size Bookshelf Speakers#8 of 47 in Large Size Bookshelf Speakers
Bass Extension (-10dB)35Hz38Hz
Bass Extension (-3dB)53Hz56Hz
Dimensions16.3"H x 8.3"W x 12.4"D (414 x 210.8 x 315 mm)22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm)
Impedance4 ohms8 ohms
Drivers165 mm (6.5 in.) hybrid aluminium cone woofer, 100 mm (4 in.) aluminium cone midrange, 19 mm (0.75 in.) vented aluminium dome with MAT tweeter10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter
Sensitivity85dB88dB
Weight20.9 lbs / 9.5 kg each46.3 lbs / 21.0 kg each
Woofer Cabinet-Rear ported

The Two Speakers In Full

KEF Q Concerto Meta: $1,399.99 Crutchfield Amazon

KEF Q Concerto Meta ranking card

Pros: Really good in-room neutrality with consistent horizontal directivity from seat to seat. Directivity holds remarkably steady from lower treble into upper treble, where many similarly-priced speakers narrow sharply as frequency rises - one of the reviewer’s top 10 picks under $1,500.

Cons: Radiation pattern measures about ±50°, narrower than the reviewer’s preferred ±60° for a stronger sense of envelopment. Needs to be pointed closer to on-axis rather than heavily toed out - combined with its rolled-off, shelved-down top end, too much toe-out makes it sound noticeably dark.

Bass Extension (-10dB)35Hz
Bass Extension (-3dB)53Hz
Dimensions16.3"H x 8.3"W x 12.4"D (414 x 210.8 x 315 mm)
Drivers165 mm (6.5 in.) hybrid aluminium cone woofer, 100 mm (4 in.) aluminium cone midrange, 19 mm (0.75 in.) vented aluminium dome with MAT tweeter
Impedance4 ohms
Sensitivity85dB
Weight20.9 lbs / 9.5 kg each

MoFi SourcePoint 10: $3500 Crutchfield

MoFi SourcePoint 10 ranking card

Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance.

Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.

Bass Extension (-10dB)38Hz
Bass Extension (-3dB)56Hz
Dimensions22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm)
Drivers10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter
Impedance8 ohms
Sensitivity88dB
Weight46.3 lbs / 21.0 kg each
Woofer CabinetRear ported

As an Amazon Associate I earn from qualifying purchases.

Product prices and availability were last checked August 9, 2026 at 6:57 AM UTC and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.