Short answer: the KEF LS50 Meta. It ranks #4 of 160 bookshelf speakers by sound quality (rated 4.5/5) at $1,599 and is still sold new; the ELAC BS U5 ranks #108 (rated 2.9/5) and is discontinued, so it is only an option used.
The KEF LS50 Meta is the more accurate option. Uni-Q concentric driver mounts a 1” vented aluminum dome tweeter at the center of a 5.25” aluminum cone woofer, rated 79Hz-20kHz+. Its measured preference score, a predictor of how neutral it sounds, is 5.74 against 4.71 for the ELAC BS U5. The tradeoff: F3 of 67Hz and F10 of 42Hz mean it doesn’t get much below 50Hz in-room; a subwoofer is recommended for real bass.
What the ELAC BS U5 does well: This slim three-way coaxial design (an Andrew Jones creation) shows a fairly even on-axis response up to 3kHz, with off-axis behavior notably smoother than the on-axis curve. The catch: Distortion is very high right at both crossover points (around 270Hz (mid-range) and 2700Hz (tweeter)) at both 86dB and 96dB SPL/1m, exceeding 3% at the mid-range crossover.
Buy the KEF LS50 Meta. It is rated higher for sound quality; the ELAC BS U5 is no longer sold new.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| KEF LS50 Meta | ELAC BS U5 | |
|---|---|---|
| Price | $1,599.00 per pair | $856 per pair Discontinued |
| Ranked | #4 of 160 in Medium Size Bookshelf Speakers | #108 of 160 in Medium Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin’s Audio Corner) | 41Hz (derived, log-interpolated between spinorama.org -9dB/-12dB points) |
| Bass Extension (-3dB) | 68Hz (measured, Erin’s Audio Corner) | 63Hz (measured, Audio Science Review) |
| Dimensions | 11.9”H x 7.9”W x 11”D (302 x 200 x 280.5 mm) | 13.4”H x 7”W x 11.5”D (339.1 x 178.0 x 293.1 mm) |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) | 4 ohms nominal (3.4 ohms minimum) |
| Sensitivity | 83dB (measured average, Erin’s Audio Corner; 85dB manufacturer specified) | 83dB (2.83V/1m, measured, Audio Science Review) |
| Drivers | 130 mm (5.25 in.) aluminium cone woofer, 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption tweeter | 1” tweeter + 5.25” woofer |
| Weight | 17.2 lbs (7.8 kg) each | 13.2 lbs (6 kg) |
| Woofer Cabinet | ported, rear | ported, rear |
| Spinorama Preference Score | 5.74 | 4.71 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 7.88 | 6.79 (spinorama.org) |
| DIY Kit | No | No |
Related Speaker Comparisons
How KEF LS50 Meta compares with other leading options:
- KEF LS50 Meta vs Audio First Fidelia
- KEF LS50 Meta vs Philharmonic Ceramic Mini
- Ascend Sierra 1 v2 vs KEF LS50 Meta
- Ascend Acoustics Luna V2 Mini-Monitor Ribbon vs KEF LS50 Meta
- KEF LS50 Meta vs XMechanik Mechano23 DIY
Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF LS50 Meta: $1,599.00 per pair Amazon Crutchfield eBay
Older model: the KEF LS50 (ranked lower, rated 3.9/5).
Pros: Uni-Q concentric driver mounts a 1” vented aluminum dome tweeter at the center of a 5.25” aluminum cone woofer, rated 79Hz-20kHz+. Speaker-to-speaker matching measured tight at roughly 0.5dB deviation between the pair tested, versus 2-3dB seen on some other speakers: likely why imaging stayed so precise. Imaging stays tight and focused even toed out, unlike most coincident designs where toe-out typically diffuses the image, giving more of an oval-shaped soundstage than a hard rectangular boundary. Horizontal and vertical directivity both hold to about ±50° at the -6dB point, so tonality stays consistent across roughly a 100° listening cone. The extended bass shelf is deliberately tuned for near-wall/boundary placement rather than the usual “pull it 3 feet into the room” advice, playing lower without excess boominess when placed close to a wall. At its frequent sale price, well below list, called a no-brainer for a compact stand-mount speaker. Independent ASR Klippel measurements corroborate this: very good directivity with the on- and off-axis curves tracking closely, and a predicted in-room response the reviewer called “very close to ideal.”. Measured bass extension of 68Hz (-3dB), with a measured sensitivity of 83dB.
Cons: F3 of 67Hz and F10 of 42Hz mean it doesn’t get much below 50Hz in-room; a subwoofer is recommended for real bass. A 2-3dB scoop around 2-4kHz shows up in both the listening window and sound power measurements, matching a subjectively noticed lack of attack and vocal clarity that the reviewer wanted to correct with about 2dB of EQ. An on-axis diffraction dip around 8kHz smooths out with about 15° of toe-out (typical for concentric designs, but still present at 0°). Distortion is elevated at low frequencies since the single 5.25” cone shares surface area with the tweeter housing, reducing effective radiating area; multitone distortion crosses the 3% threshold at 96dB/1m, making roughly 88dB or below the safer output ceiling. Moderate sensitivity (~83dB average) needed 2-3dB more amplifier gain than typical in testing. Adding a subwoofer at an 80Hz crossover only helps lower-midrange distortion, not the elevated distortion in the 1-2kHz and above-5kHz regions. ASR’s own Klippel testing found the same pattern in starker terms: THD is very good at 86dB SPL/1m but climbs past 100% in the bass at 96dB SPL/1m, confirming this is not a near-field speaker for high-output bass-heavy material. Cumulative spectral decay (waterfall) also shows a couple of resonances lingering in the 1-2kHz region.
Full KEF LS50 Meta review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 68Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 11.9”H x 7.9”W x 11”D (302 x 200 x 280.5 mm) |
| Drivers | 130 mm (5.25 in.) aluminium cone woofer, 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption tweeter |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Sensitivity | 83dB (measured average, Erin’s Audio Corner; 85dB manufacturer specified) |
| Spinorama Preference Score | 5.74 |
| Spinorama Preference Score with Perfect Sub | 7.88 |
| Weight | 17.2 lbs (7.8 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Unveiling the KEF LS50 Meta: The Truth Behind the Hype More from Erin’s Audio Corner →
- Erin’s Audio Corner Website KEF LS50 Meta
- Audio Science Review KEF LS50 Meta More from Audio Science Review →
- GR-Research: KEF LS50 Meta! Worthy of HYPE? More from GR-Research →
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- KEF LS50 Meta vs Ascend Sierra 1 v2
- KEF LS50 Meta vs Ascend Acoustics Luna V2 Mini-Monitor Ribbon
- KEF LS50 Meta vs Philharmonic Ceramic Mini
- KEF LS50 Meta vs XMechanik Mechano23 DIY
- KEF LS50 Meta vs Audio First Fidelia
- KEF LS50 Meta vs Ascend Acoustics HTM-200SE2
- KEF LS50 Meta vs Arendal 1961 Monitor
- KEF LS50 Meta vs SunAudio Purified 4
- See all 84 comparisons
ELAC BS U5: $856 per pair Discontinued eBay
Pros: This slim three-way coaxial design (an Andrew Jones creation) shows a fairly even on-axis response up to 3kHz, with off-axis behavior notably smoother than the on-axis curve. Predicted in-room response looks like it should give good tonality. Vertical directivity is better than average, a benefit of the coaxial layout. Measured bass extension of 63Hz (-3dB), with a measured sensitivity of 83dB.
Cons: Distortion is very high right at both crossover points (around 270Hz (mid-range) and 2700Hz (tweeter)) at both 86dB and 96dB SPL/1m, exceeding 3% at the mid-range crossover. Minimum impedance dips to 3.4 ohms with a possible resonance around 500Hz visible in the impedance/phase curve. Discontinued.
Full ELAC BS U5 review and specifications →
| Bass Extension (-10dB) | 41Hz (derived, log-interpolated between spinorama.org -9dB/-12dB points) |
|---|---|
| Bass Extension (-3dB) | 63Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 13.4”H x 7”W x 11.5”D (339.1 x 178.0 x 293.1 mm) |
| Drivers | 1” tweeter + 5.25” woofer |
| Impedance | 4 ohms nominal (3.4 ohms minimum) |
| Sensitivity | 83dB (2.83V/1m, measured, Audio Science Review) |
| Spinorama Preference Score | 4.71 (spinorama.org) |
| Spinorama Preference Score with Perfect Sub | 6.79 (spinorama.org) |
| Weight | 13.2 lbs (6 kg) |
| Woofer Cabinet | ported, rear |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC BS U5 vs Acoustic Energy AE100 Mk2
- ELAC BS U5 vs Dynaudio X14
- ELAC BS U5 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
- ELAC BS U5 vs Dynaudio Emit M10
- ELAC BS U5 vs JBL L52 Classic
- ELAC BS U5 vs JBL Stage 250B
- ELAC BS U5 vs Paradigm Monitor SE Atom
- ELAC BS U5 vs Sony SS-CS5 M2
- See all 32 comparisons