Short answer: the KEF LS50 Meta for better sound quality, the Definitive Technology ProMonitor 1000 for the lower price. The KEF LS50 Meta ranks #4 of 74 bookshelf speakers at $1599. The Definitive Technology ProMonitor 1000 ranks #66 at $249, $1350 cheaper.
What the KEF LS50 Meta offers: Uni-Q concentric driver mounts a 1” vented aluminum dome tweeter at the center of a 5.25” aluminum cone woofer, rated 79Hz-20kHz+. Speaker-to-speaker matching measured tight at roughly 0.5dB deviation between the pair tested, versus 2-3dB seen on some other speakers - likely why imaging stayed so precise. Imaging stays tight and focused even toed out, unlike most coincident designs where toe-out typically diffuses the image, giving more of an oval-shaped soundstage than a hard rectangular boundary. Horizontal and vertical directivity both hold to about ±50° at the -6dB point, so tonality stays consistent across roughly a 100° listening cone. The extended bass shelf is deliberately tuned for near-wall/boundary placement rather than the usual “pull it 3 feet into the room” advice, playing lower without excess boominess when placed close to a wall. At $1,000 (a frequent sale price versus $1,600 list), called a no-brainer for a compact stand-mount speaker. Independent ASR Klippel measurements corroborate this: very good directivity with the on- and off-axis curves tracking closely, and a predicted in-room response the reviewer called “very close to ideal.” Watch for: F3 of 67Hz and F10 of 42Hz mean it doesn’t get much below 50Hz in-room; a subwoofer is recommended for real bass. A 2-3dB scoop around 2-4kHz shows up in both the listening window and sound power measurements, matching a subjectively noticed lack of attack and vocal clarity that the reviewer wanted to correct with about 2dB of EQ. An on-axis diffraction dip around 8kHz smooths out with about 15° of toe-out (typical for concentric designs, but still present at 0°). Distortion is elevated at low frequencies since the single 5.25” cone shares surface area with the tweeter housing, reducing effective radiating area; multitone distortion crosses the 3% threshold at 96dB/1m, making roughly 88dB or below the safer output ceiling. Moderate sensitivity (~83dB average) needed 2-3dB more amplifier gain than typical in testing. Adding a subwoofer at an 80Hz crossover only helps lower-midrange distortion, not the elevated distortion in the 1-2kHz and above-5kHz regions. ASR’s own Klippel testing found the same pattern in starker terms: THD is very good at 86dB SPL/1m but climbs past 100% in the bass at 96dB SPL/1m, confirming this is not a near-field speaker for high-output bass-heavy material. Cumulative spectral decay (waterfall) also shows a couple of resonances lingering in the 1-2kHz region.
What the Definitive Technology ProMonitor 1000 offers: Bass distortion is well controlled per the measurements, and the slow bass rolloff means it can be pushed fairly hard for its size. Ships with a footer that keeps the small cabinet planted despite its light weight. Watch for: CEA2034 spinorama shows severely reduced bass energy between 40-120Hz, a directivity mismatch between the tweeter and woofer, and a severe resonance/interference issue around 14kHz. Distortion at 96dB SPL was so bad the reviewer limited testing to 86dB. Direct comparison to a $118/pair Pioneer SP-BS22-LR left the reviewer calling the $500/pair ProMonitor 1000 “a bad experiment that should be forgotten” and concluding “there is nothing Pro about it.”
Buy the KEF LS50 Meta if sound quality matters more than the price. Buy the Definitive Technology ProMonitor 1000 if the price matters more than sound quality.
If sound quality matters at all to you, skip the Definitive Technology ProMonitor 1000. It ranks near the bottom of the 74 bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| KEF LS50 Meta | Definitive Technology ProMonitor 1000 | |
|---|---|---|
| Price | $1,599.00 | $249.00 |
| Ranked | #4 of 74 in Medium Size Bookshelf Speakers | #66 of 74 in Medium Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin’s Audio Corner) | 80Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 68Hz (measured, Erin’s Audio Corner) | 95Hz (measured, Audio Science Review) |
| Dimensions | 11.9"H x 7.9"W x 11"D (302 x 200 x 280.5 mm) | 10.88H x 6.25W x 6.5D in |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) | 8 ohms nominal |
| Sensitivity | 83dB (measured average, Erin’s Audio Corner; 85dB manufacturer specified) | 86dB (2.83V/1m, measured, Audio Science Review - reviewer noted this vs. a manufacturer spec of 91dB) |
| Drivers | 130 mm (5.25 in.) aluminium cone woofer, 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption tweeter | 1" aluminum dome tweeter, 5.25" BDSS mid/woofer, 5.25" planar bass radiator |
| Weight | 17.2 lbs / 7.8 kg each | 7.3 lbs / 3.29 kg each |
| Woofer Cabinet | ported, rear | passive radiator |
| Frequency Response | - | 47Hz - 30kHz (Manufacturer specified) |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- ELAC BS U5 vs Ascend Sierra 1 v2
- Dynaudio Emit M10 vs Ascend Sierra 1 v2
- Ascend Sierra 1 v2 vs Philharmonic Ceramic Mini
- Sony SS-CS5 M2 vs KEF LS50 Meta
- KEF LS50 Meta vs JBL Stage A120
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF LS50 Meta: $1,599.00 Amazon Crutchfield eBay
Pros: Uni-Q concentric driver mounts a 1” vented aluminum dome tweeter at the center of a 5.25” aluminum cone woofer, rated 79Hz-20kHz+. Speaker-to-speaker matching measured tight at roughly 0.5dB deviation between the pair tested, versus 2-3dB seen on some other speakers - likely why imaging stayed so precise. Imaging stays tight and focused even toed out, unlike most coincident designs where toe-out typically diffuses the image, giving more of an oval-shaped soundstage than a hard rectangular boundary. Horizontal and vertical directivity both hold to about ±50° at the -6dB point, so tonality stays consistent across roughly a 100° listening cone. The extended bass shelf is deliberately tuned for near-wall/boundary placement rather than the usual “pull it 3 feet into the room” advice, playing lower without excess boominess when placed close to a wall. At $1,000 (a frequent sale price versus $1,600 list), called a no-brainer for a compact stand-mount speaker. Independent ASR Klippel measurements corroborate this: very good directivity with the on- and off-axis curves tracking closely, and a predicted in-room response the reviewer called “very close to ideal.”
Cons: F3 of 67Hz and F10 of 42Hz mean it doesn’t get much below 50Hz in-room; a subwoofer is recommended for real bass. A 2-3dB scoop around 2-4kHz shows up in both the listening window and sound power measurements, matching a subjectively noticed lack of attack and vocal clarity that the reviewer wanted to correct with about 2dB of EQ. An on-axis diffraction dip around 8kHz smooths out with about 15° of toe-out (typical for concentric designs, but still present at 0°). Distortion is elevated at low frequencies since the single 5.25” cone shares surface area with the tweeter housing, reducing effective radiating area; multitone distortion crosses the 3% threshold at 96dB/1m, making roughly 88dB or below the safer output ceiling. Moderate sensitivity (~83dB average) needed 2-3dB more amplifier gain than typical in testing. Adding a subwoofer at an 80Hz crossover only helps lower-midrange distortion, not the elevated distortion in the 1-2kHz and above-5kHz regions. ASR’s own Klippel testing found the same pattern in starker terms: THD is very good at 86dB SPL/1m but climbs past 100% in the bass at 96dB SPL/1m, confirming this is not a near-field speaker for high-output bass-heavy material. Cumulative spectral decay (waterfall) also shows a couple of resonances lingering in the 1-2kHz region.
Full KEF LS50 Meta review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 68Hz (measured, Erin's Audio Corner) |
| Dimensions | 11.9"H x 7.9"W x 11"D (302 x 200 x 280.5 mm) |
| Drivers | 130 mm (5.25 in.) aluminium cone woofer, 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption tweeter |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin's Audio Corner) |
| Sensitivity | 83dB (measured average, Erin's Audio Corner; 85dB manufacturer specified) |
| Weight | 17.2 lbs / 7.8 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Unveiling the KEF LS50 Meta: The Truth Behind the Hype More from Erin’s Audio Corner →
- Erin’s Audio Corner Website KEF LS50 Meta
- Audio Science Review KEF LS50 Meta More from Audio Science Review →
- GR-Research: KEF LS50 Meta! Worthy of HYPE? More from GR-Research →
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- Erin’s Audio Corner Measurements (spinorama.org)
- Reddit Search for KEF LS50 Meta Review
- Head-to-Head Comparisons
- KEF LS50 Meta vs Ascend Sierra 1 v2
- KEF LS50 Meta vs Ascend Acoustics Luna V2 Mini-Monitor Ribbon
- KEF LS50 Meta vs Philharmonic Ceramic Mini
- KEF LS50 Meta vs Audio First Fidelia
- KEF LS50 Meta vs Arendal 1961 Monitor
- KEF LS50 Meta vs Moondrop M4P MTM
- KEF LS50 Meta vs Revel M105
- KEF LS50 Meta vs Monitor Audio Silver 50 7G
- See all 41 comparisons
Definitive Technology ProMonitor 1000: $249.00 Amazon eBay
Pros: Bass distortion is well controlled per the measurements, and the slow bass rolloff means it can be pushed fairly hard for its size. Ships with a footer that keeps the small cabinet planted despite its light weight.
Cons: CEA2034 spinorama shows severely reduced bass energy between 40-120Hz, a directivity mismatch between the tweeter and woofer, and a severe resonance/interference issue around 14kHz. Distortion at 96dB SPL was so bad the reviewer limited testing to 86dB. Direct comparison to a $118/pair Pioneer SP-BS22-LR left the reviewer calling the $500/pair ProMonitor 1000 “a bad experiment that should be forgotten” and concluding “there is nothing Pro about it.”
Full Definitive Technology ProMonitor 1000 review and specifications →
| Bass Extension (-10dB) | 80Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 95Hz (measured, Audio Science Review) |
| Dimensions | 10.88H x 6.25W x 6.5D in |
| Drivers | 1" aluminum dome tweeter, 5.25" BDSS mid/woofer, 5.25" planar bass radiator |
| Frequency Response | 47Hz - 30kHz (Manufacturer specified) |
| Impedance | 8 ohms nominal |
| Sensitivity | 86dB (2.83V/1m, measured, Audio Science Review - reviewer noted this vs. a manufacturer spec of 91dB) |
| Weight | 7.3 lbs / 3.29 kg each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Definitive Technology ProMonitor 1000 vs Polk T15
- Definitive Technology ProMonitor 1000 vs Sehlin Helium
- Definitive Technology ProMonitor 1000 vs JBL Control 1 Pro
- Definitive Technology ProMonitor 1000 vs Fluance Signature HFS
- Definitive Technology ProMonitor 1000 vs Pioneer Elite SP-EBS73-LR
- Definitive Technology ProMonitor 1000 vs JBL Stage A130
- Definitive Technology ProMonitor 1000 vs Klipsch R-41M
- Definitive Technology ProMonitor 1000 vs Q Acoustics 5020
- See all 27 comparisons