JBL Studio 698 vs KEF Blade Two Meta

Last updated: August 24, 2026

Short answer: the KEF Blade Two Meta for better sound quality, the JBL Studio 698 for the lower price. The KEF Blade Two Meta ranks #2 of 68 floorstanding speakers at $28000. The JBL Studio 698 ranks #21 at $599, $27401 cheaper.

What the JBL Studio 698 offers: High-Definition Imaging (HDI) horn waveguide paired with a 1” compression driver provides excellent high-frequency directivity control and seamless acoustic handoff to the 6” PolyPlas midrange. Dual 8” PolyPlas woofers deliver robust low-end authority with solid bass extension down to an F3 of 53Hz and F10 of 34Hz. High voltage sensitivity (90dB SPL at 2.83V/1m) and clean power handling provide effortless dynamic headroom and low distortion for home theater and music listening. Watch for: Measured response exhibits a prominent mid-bass emphasis bump around 80Hz that can sound overly thick or chesty in smaller rooms without DSP EQ. Treble response lacks top-octave ‘air’ above 12kHz compared to high-end dome or ribbon tweeters. Physically large, heavy cabinet (35.8 kg per speaker) requires careful room placement and a wide acoustic footprint.

What the KEF Blade Two Meta offers: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal and vertical dispersion, unusual for a multi-driver speaker. Fully rounded, edgeless cabinet eliminates baffle diffraction. Frequency response holds within about 2.5dB across the listening window. Extremely low harmonic and multitone distortion even at 96dB, with under 0.5dB of compression at full output, rivaling the Reference 1 Meta and JBL 4367 in dynamic range. Reviewer described the imaging and soundstage depth as revealing recording details other speakers he tested (PS Audio FR10, MoFi SourcePoint 8, Neumann KH80) masked. Available in any custom finish at no extra charge. Watch for: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related. Bass rolls off fairly quickly below its 31Hz F3. Horizontal dispersion (~50 degrees) is narrower than the reviewer preferred 70-80 degrees; benefits from toeing out 10-20 degrees to open soundstage without losing image focus. Needs a separate power amp, not AVR-friendly.

Buy the JBL Studio 698 if the price matters more than sound quality. Buy the KEF Blade Two Meta if sound quality matters more than the price.

JBL Studio 698 vs KEF Blade Two Meta

Specifications Side By Side

JBL Studio 698 KEF Blade Two Meta
Price$599.00$28000 only sold in stores
Ranked#21 of 68 in Large Size Floorstanding Speakers#2 of 68 in Large Size Floorstanding Speakers
Bass Extension (-10dB)34Hz (measured, Erin’s Audio Corner)26Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)53Hz (measured, Erin’s Audio Corner)31Hz (measured, Erin’s Audio Corner)
Dimensions41.7"H x 11.8"W x 15.7"D (1058 x 300 x 400 mm)46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm)
Impedance6 ohms nominal (4.1 ohms minimum above 80Hz, measured by Erin’s Audio Corner)4 ohms nominal (3.3 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity90dB (measured average, Erin’s Audio Corner)86.8dB (measured, Erin’s Audio Corner)
Drivers1 in. High-Definition Imaging compression driver, 6 in. PolyPlas midrange, dual 8 in. PolyPlas woofers4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter
Weight78.9 lbs / 35.8 kg each79.4 lbs / 36 kg each
Woofer Cabinetported, rearported, rear

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

JBL Studio 698: $599.00 Amazon Crutchfield eBay

JBL Studio 698 ranking card

Pros: High-Definition Imaging (HDI) horn waveguide paired with a 1” compression driver provides excellent high-frequency directivity control and seamless acoustic handoff to the 6” PolyPlas midrange. Dual 8” PolyPlas woofers deliver robust low-end authority with solid bass extension down to an F3 of 53Hz and F10 of 34Hz. High voltage sensitivity (90dB SPL at 2.83V/1m) and clean power handling provide effortless dynamic headroom and low distortion for home theater and music listening.

Cons: Measured response exhibits a prominent mid-bass emphasis bump around 80Hz that can sound overly thick or chesty in smaller rooms without DSP EQ. Treble response lacks top-octave ‘air’ above 12kHz compared to high-end dome or ribbon tweeters. Physically large, heavy cabinet (35.8 kg per speaker) requires careful room placement and a wide acoustic footprint.

Bass Extension (-10dB)34Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)53Hz (measured, Erin's Audio Corner)
Dimensions41.7"H x 11.8"W x 15.7"D (1058 x 300 x 400 mm)
Drivers1 in. High-Definition Imaging compression driver, 6 in. PolyPlas midrange, dual 8 in. PolyPlas woofers
Impedance6 ohms nominal (4.1 ohms minimum above 80Hz, measured by Erin's Audio Corner)
Sensitivity90dB (measured average, Erin's Audio Corner)
Weight78.9 lbs / 35.8 kg each
Woofer Cabinetported, rear

KEF Blade Two Meta: $28000 only sold in stores eBay

KEF Blade Two Meta ranking card

Pros: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal and vertical dispersion, unusual for a multi-driver speaker. Fully rounded, edgeless cabinet eliminates baffle diffraction. Frequency response holds within about 2.5dB across the listening window. Extremely low harmonic and multitone distortion even at 96dB, with under 0.5dB of compression at full output, rivaling the Reference 1 Meta and JBL 4367 in dynamic range. Reviewer described the imaging and soundstage depth as revealing recording details other speakers he tested (PS Audio FR10, MoFi SourcePoint 8, Neumann KH80) masked. Available in any custom finish at no extra charge.

Cons: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related. Bass rolls off fairly quickly below its 31Hz F3. Horizontal dispersion (~50 degrees) is narrower than the reviewer preferred 70-80 degrees; benefits from toeing out 10-20 degrees to open soundstage without losing image focus. Needs a separate power amp, not AVR-friendly.

Bass Extension (-10dB)26Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)31Hz (measured, Erin's Audio Corner)
Dimensions46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm)
Drivers4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter
Impedance4 ohms nominal (3.3 ohms minimum, measured, Erin's Audio Corner)
Sensitivity86.8dB (measured, Erin's Audio Corner)
Weight79.4 lbs / 36 kg each
Woofer Cabinetported, rear