Short answer: the Genelec 8331A for better sound quality, the IK Multimedia iLoud MTM for the lower price. The Genelec 8331A ranks #1 of 64 powered bookshelf speakers at $5750. The IK Multimedia iLoud MTM ranks #21 at $800, $4950 cheaper.
What the IK Multimedia iLoud MTM offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor with 100W per speaker and XLR input, well-suited to desktop/nearfield use with great linearity for mixing or mastering. Includes a genuinely effective auto-room-correction microphone that resolved specific room resonance peaks (150Hz and 220Hz in testing), making the midrange sound noticeably more lifelike. Extensive back-panel switches handle desktop vs. free-field placement plus treble/bass adjustment. Harmonic distortion looks good at a moderate 86dB output, appropriate for a speaker this size. Reasonable value at around $799/pair including the calibration mic. Watch for: Native treble tuning runs hot (about 3dB boosted on-axis); the reviewer found the back-panel -3dB switch too aggressive and preferred roughly -1.5dB via external EQ instead. Vertical MTM lobing means listeners need to stay within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout. Should never be laid on its side (introduces comb filtering); if it must be, the tweeter needs to be pointed directly at the listener. Bass falls off sharply below its F3 of 51Hz (F10 45Hz) - like a cliff - so a subwoofer is required for anything below about 50Hz. Multitone distortion rises sharply at 96dB/1m; the reviewer recommends not exceeding about 86dB for extended listening at any distance. SPL-limited overall: significant bass loss by 96dB, and dynamic range essentially collapses approaching 102dB; maximum broadband output for the pair tops out around 94dB at 1 meter. Horizontal directivity narrows with frequency rather than staying constant, unlike some rival designs.
What the Genelec 8331A offers: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free. Watch for: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Buy the IK Multimedia iLoud MTM if the price matters more than sound quality. Buy the Genelec 8331A if sound quality matters more than the price.
Specifications Side By Side
| IK Multimedia iLoud MTM | Genelec 8331A | |
|---|---|---|
| Price | $800 Discontinued | $5750 |
| Ranked | #21 of 64 in Medium Size Powered Bookshelf Speakers | #1 of 64 in Medium Size Powered Bookshelf Speakers |
| Bass Extension (-3dB) | 50Hz (measured, Audio Science Review) | 49Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 40Hz (measured, Audio Science Review) | 39Hz (measured, Erin’s Audio Corner) |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Frequency Response | 50 Hz - 24 kHz (-3dB) (Manufacturer specified) | - |
| Inputs | XLR | - |
| Weight | 5.5 lbs / 2.5 kg | 14.8 lbs / 6.7kg each |
| Drivers | 2x 3.5" (89mm) woofers | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| App | No | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Discontinued | Yes | - |
| Sensitivity | - | Not applicable (active DSP loudspeaker) |
| Maximum Output | - | 100dB at 3m before protection (measured, Erin’s Audio Corner) |
| Amplification | - | 72W LF + 36W MF + 36W HF |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- IK Multimedia iLoud MTM MKII vs Reflector Audio Square Two
- Neumann KH120 MKII vs Kali Audio SM-5
- Neumann KH120 MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Genelec 8331A
- Genelec 8320A vs Genelec 8331A
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM: $800 Discontinued Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor with 100W per speaker and XLR input, well-suited to desktop/nearfield use with great linearity for mixing or mastering. Includes a genuinely effective auto-room-correction microphone that resolved specific room resonance peaks (150Hz and 220Hz in testing), making the midrange sound noticeably more lifelike. Extensive back-panel switches handle desktop vs. free-field placement plus treble/bass adjustment. Harmonic distortion looks good at a moderate 86dB output, appropriate for a speaker this size. Reasonable value at around $799/pair including the calibration mic.
Cons: Native treble tuning runs hot (about 3dB boosted on-axis); the reviewer found the back-panel -3dB switch too aggressive and preferred roughly -1.5dB via external EQ instead. Vertical MTM lobing means listeners need to stay within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout. Should never be laid on its side (introduces comb filtering); if it must be, the tweeter needs to be pointed directly at the listener. Bass falls off sharply below its F3 of 51Hz (F10 45Hz) - like a cliff - so a subwoofer is required for anything below about 50Hz. Multitone distortion rises sharply at 96dB/1m; the reviewer recommends not exceeding about 86dB for extended listening at any distance. SPL-limited overall: significant bass loss by 96dB, and dynamic range essentially collapses approaching 102dB; maximum broadband output for the pair tops out around 94dB at 1 meter. Horizontal directivity narrows with frequency rather than staying constant, unlike some rival designs. Discontinued.
Full IK Multimedia iLoud MTM review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 40Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 50Hz (measured, Audio Science Review) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Discontinued | Yes |
| Drivers | 2x 3.5" (89mm) woofers |
| EQ | Yes (Room adjustment) |
| Frequency Response | 50 Hz - 24 kHz (-3dB) (Manufacturer specified) |
| Inputs | XLR |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Audio Science Review Measurements More from Audio Science Review →
- DSAUDIO.review: IK Multimedia iLoud MTM vs Genelec 8020D Sound & Frequency Response Comparison More from DSAUDIOreview →
- DSAUDIOreview: IK Multimedia iLoud MTM vs iLoud Micro Sound & Frequency Response Comparison
- DSAUDIO.review: IK Multimedia iLoud MTM vs KRK Rokit 5 G4 Sound & Frequency Response Comparison
- DSAUDIO.review: IK Multimedia iLoud MTM vs Edifier S3000 Pro Sound & Frequency Response Comparison
- DSAUDIO.review: Neumann KH80 DSP vs IK Multimedia iLoud MTM Sound & Frequency Response Comparison
- DSAUDIO.review: Adam Audio A3X vs IK Multimedia iLoud MTM Sound & Frequency Response Comparison
- DSAUDIO.review: Yamaha HS8 vs IK Multimedia iLoud MTM Sound & Frequency Response Comparison
- Audio Science Review Measurements (spinorama.org)
- Reddit Search for IK Multimedia iLoud MTM Review
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM vs IK Multimedia iLoud MTM MKII
- IK Multimedia iLoud MTM vs JBL 705P
- IK Multimedia iLoud MTM vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM vs HEDD Type 05 A-CORE
- IK Multimedia iLoud MTM vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM vs Airpulse A100
- IK Multimedia iLoud MTM vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM vs KEF LSX II LT
- See all 47 comparisons
Genelec 8331A: $5750 Bhphotovideo eBay
Pros: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free.
Cons: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Full Genelec 8331A review and specifications →
| Amplification | 72W LF + 36W MF + 36W HF |
|---|---|
| Bass Extension (-10dB) | 39Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 49Hz (measured, Erin's Audio Corner) |
| Dimensions | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Drivers | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| Maximum Output | 100dB at 3m before protection (measured, Erin's Audio Corner) |
| Sensitivity | Not applicable (active DSP loudspeaker) |
| Weight | 14.8 lbs / 6.7kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons