Short answer: the IK Multimedia iLoud MTM MKII. It ranks #20 of 58 powered bookshelf speakers by sound quality at $799.99; the Dynaudio LYD 5 ranks #45 and costs $1000, so there is not much of a tradeoff to weigh.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Dynaudio LYD 5 offers: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter. Watch for: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.
Buy the IK Multimedia iLoud MTM MKII. It ranks higher for sound quality than the Dynaudio LYD 5 and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip the Dynaudio LYD 5. It ranks near the bottom of the 58 powered bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Dynaudio LYD 5 | |
|---|---|---|
| Price | $799.99 | $1000 |
| Ranked | #20 of 58 in Medium Size Powered Bookshelf Speakers | #45 of 58 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | 10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | 50Hz - 21kHz (Manufacturer specified) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 68Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 50Hz (measured, Audio Science Review) |
| Inputs | XLR | - |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 5" woofer, 28mm soft dome tweeter |
| App | Yes (X-MONITOR speaker emulation) | No |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | No |
| Output Power | 100w Per Speaker | 100W total (50W LF, 50W HF) |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | 11.9 lbs / 5.4 kg each |
| Max SPL | 112.5dB peak | - |
| DSP | - | No |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Airpulse A100 vs IK Multimedia iLoud MTM
- Genelec 8020D vs IK Multimedia iLoud MTM
- Edifier S1000W vs Genelec 8020D
- IK Multimedia iLoud MTM vs Dynaudio LYD 5
- Airpulse A100 vs IK Multimedia iLoud MTM MKII
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 39 comparisons
Dynaudio LYD 5: $1000 Bhphotovideo eBay
Pros: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter.
Cons: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.
Full Dynaudio LYD 5 review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 68Hz (measured, Audio Science Review) |
| DSP | No |
| Dimensions | 10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm) |
| Drivers | 5" woofer, 28mm soft dome tweeter |
| EQ | No |
| Frequency Response | 50Hz - 21kHz (Manufacturer specified) |
| Output Power | 100W total (50W LF, 50W HF) |
| Weight | 11.9 lbs / 5.4 kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio LYD 5 vs Pioneer DJ VM-50
- Dynaudio LYD 5 vs Edifier S1000W
- Dynaudio LYD 5 vs Edifier S1000MKII
- Dynaudio LYD 5 vs Klipsch The Fives
- Dynaudio LYD 5 vs Kali Audio IN-UNF
- Dynaudio LYD 5 vs Audioengine A5+ Classic
- Dynaudio LYD 5 vs Edifier R1280T
- Dynaudio LYD 5 vs Edifier R1280DB
- See all 21 comparisons