Short answer: the Genelec 8020D for better sound quality, the Topping MA4 for the lower price. The Genelec 8020D ranks #6 of 64 powered bookshelf speakers at $1100. The Topping MA4 ranks #33 at $449, $651 cheaper.
What the Genelec 8020D offers: Klippel-based spinorama measurements show a flat, well-behaved on-axis response from about 60Hz to 10kHz, with listening-window and early-reflections curves tracking closely together - a sign of well-controlled directivity. Horizontal directivity holds tight out to about ±30 degrees before starting to narrow. Applying EQ correction visibly closes the gap between the on-axis and predicted in-room curves, raising the calculated on-axis preference score from 5.4 to 6.4 and the in-room score from 5.6 to 6.6 - a straightforward, worthwhile tuning target for anyone using it with room correction. Watch for: Sound power rolls off starting around 500Hz-1kHz as the small 4.1” woofer/tweeter pair begins to beam, a typical trait of small nearfield monitors at this price. Off-axis response (measured out to 90 degrees) narrows noticeably above 1kHz, so off-center listening loses top-end energy. High price for the driver size.
What the Topping MA4 offers: Topping’s first loudspeaker, notable for deliberately skipping the DAC and DSP the company built its reputation on. A single balanced XLR input feeds a fully analog crossover, which Topping argues keeps the signal path free of extra conversion stages. The bass alignment measures a low Q of 0.452, rolling off cleanly rather than peaking, and extension reaches 49.8Hz at -3dB for a compact 4 inch two way, at a genuinely low price. Watch for: On axis deviation measures 0.503dB average, on the rougher side for this catalog, and listening window smoothness sits at a moderate 0.44. No USB, Bluetooth, or digital input of any kind, an unusual limitation from a DAC company and a real constraint if you want a simple all in one desktop setup. This is Topping’s first speaker with no track record in the category, and current US retail availability is limited, most confirmed stock is through European or Indian resellers.
Buy the Genelec 8020D if sound quality matters more than the price. Buy the Topping MA4 if the price matters more than sound quality.
Specifications Side By Side
| Genelec 8020D | Topping MA4 | |
|---|---|---|
| Price | $1100 | 449 EUR/pair |
| Ranked | #6 of 64 in Medium Size Powered Bookshelf Speakers | #33 of 64 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 9.5"H x 5.8"W x 5.6"D (241.3 x 147.3 x 142.2 mm) | 10"H x 5.5"W x 11.3"D (255 x 140 x 288 mm) (10.04 x 5.51 x 11.34 in) |
| Frequency Response | 56 Hz - 25 kHz (-6 dB) (Manufacturer specified) | 49Hz-20kHz +/-3dB |
| Inputs | XLR | - |
| Weight | 7.1 lbs / 3.2 kg each | 8.3 lbs / 3.78 kg (8.33 lbs) each |
| Drivers | 4.1" woofer, 0.75" metal dome tweeter | 1" soft dome tweeter with waveguide, 4" paper cone woofer |
| App | No | - |
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) | 42.9Hz (measured, spinorama.org vendor data) |
| Bass Extension (-3dB) | 56Hz (measured, Audio Science Review) | 49.8Hz (measured, spinorama.org vendor data) |
| Bluetooth | No | - |
| EQ | Yes (Bass tilt, desk proximity) | - |
| Max SPL | 103dB @ 1m | 105dB @ 1m |
| Output Power | 100W (50W woofer + 50W tweeter) | - |
| Enclosure | - | ported |
| Power Output (Watts) | - | 75W total (50W woofer, 25W tweeter, Class D) |
| Sensitivity | - | 92dB |
| Crossover Points | - | 1.3kHz |
| Warranty | - | 1-2 years (varies by region) |
| Country | - | China |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Vanatoo Transparent One Encore Plus vs Genelec 8320A
- Audioengine HD6 vs Vanatoo Transparent One Encore Plus
- Neumann KH80 DSP vs Airpulse A100
- Genelec 8020D vs Audioengine HD4
- KEF LSX II LT vs Genelec 8020D
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Genelec 8020D: $1100 Bhphotovideo eBay
Pros: Klippel-based spinorama measurements show a flat, well-behaved on-axis response from about 60Hz to 10kHz, with listening-window and early-reflections curves tracking closely together - a sign of well-controlled directivity. Horizontal directivity holds tight out to about ±30 degrees before starting to narrow. Applying EQ correction visibly closes the gap between the on-axis and predicted in-room curves, raising the calculated on-axis preference score from 5.4 to 6.4 and the in-room score from 5.6 to 6.6 - a straightforward, worthwhile tuning target for anyone using it with room correction.
Cons: Sound power rolls off starting around 500Hz-1kHz as the small 4.1” woofer/tweeter pair begins to beam, a typical trait of small nearfield monitors at this price. Off-axis response (measured out to 90 degrees) narrows noticeably above 1kHz, so off-center listening loses top-end energy. High price for the driver size.
Full Genelec 8020D review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 56Hz (measured, Audio Science Review) |
| Bluetooth | No |
| Dimensions | 9.5"H x 5.8"W x 5.6"D (241.3 x 147.3 x 142.2 mm) |
| Drivers | 4.1" woofer, 0.75" metal dome tweeter |
| EQ | Yes (Bass tilt, desk proximity) |
| Frequency Response | 56 Hz - 25 kHz (-6 dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 103dB @ 1m |
| Output Power | 100W (50W woofer + 50W tweeter) |
| Weight | 7.1 lbs / 3.2 kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Audio Science Review Measurements More from Audio Science Review →
- DSAUDIO.review: Genelec 8020D vs Yamaha HS5 Soun & Frequency Response Comparison More from DSAUDIOreview →
- DSAUDIO.review: Genelec 8020D vs Yamaha HS8 Sound & Frequency Response Comparison
- DSAUDIO.review: Neumann KH80 DSP vs Genelec 8020D Sound & Frequency Response Comparison
- DSAUDIO.review: IK Multimedia iLoud MTM vs Genelec 8020D Sound & Frequency Response Comparison
- DSAUDIO.review: KEF LSX vs Genelec 8020D Sound & Frequency Response Comparison
- DSAUDIO.review: Genelec 8020D vs Adam Audo T5V Sound & Frequency Response Comparison
- DSAUDIO.review: Genelec 8020D & KRK Rokit 5 G4 PR5G4 - Same, same, but different Sound & Response Comparison
- Reddit Search for Genelec 8020D Review
- Head-to-Head Comparisons
Topping MA4: 449 EUR/pair Audiophonics eBay
Pros: Topping’s first loudspeaker, notable for deliberately skipping the DAC and DSP the company built its reputation on. A single balanced XLR input feeds a fully analog crossover, which Topping argues keeps the signal path free of extra conversion stages. The bass alignment measures a low Q of 0.452, rolling off cleanly rather than peaking, and extension reaches 49.8Hz at -3dB for a compact 4 inch two way, at a genuinely low price.
Cons: On axis deviation measures 0.503dB average, on the rougher side for this catalog, and listening window smoothness sits at a moderate 0.44. No USB, Bluetooth, or digital input of any kind, an unusual limitation from a DAC company and a real constraint if you want a simple all in one desktop setup. This is Topping’s first speaker with no track record in the category, and current US retail availability is limited, most confirmed stock is through European or Indian resellers.
Full Topping MA4 review and specifications →
| Bass Extension (-10dB) | 42.9Hz (measured, spinorama.org vendor data) |
|---|---|
| Bass Extension (-3dB) | 49.8Hz (measured, spinorama.org vendor data) |
| Country | China |
| Crossover Points | 1.3kHz |
| Dimensions | 10"H x 5.5"W x 11.3"D (255 x 140 x 288 mm) (10.04 x 5.51 x 11.34 in) |
| Drivers | 1" soft dome tweeter with waveguide, 4" paper cone woofer |
| Enclosure | ported |
| Frequency Response | 49Hz-20kHz +/-3dB |
| Max SPL | 105dB @ 1m |
| Power Output (Watts) | 75W total (50W woofer, 25W tweeter, Class D) |
| Sensitivity | 92dB |
| Warranty | 1-2 years (varies by region) |
| Weight | 8.3 lbs / 3.78 kg (8.33 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons