Short answer: the Focal Aria 906 for a more forgiving setup; the Sonus Faber Sonetto II G2 needs toe-out. The Sonetto II G2 is a two-way with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer on a base of concrete, aluminum and steel with under-cabinet venting, but it sounds notably bright pointed directly on-axis; toeing it out about 30 degrees reduces treble energy and sibilance. The Aria 906 shows very flat bass and an almost perfect predicted in-room response prior to 1kHz.
Buy the Sonus Faber Sonetto II G2 if you want one new; the Focal Aria 906 is discontinued, so only look for it used.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Focal Aria 906 | Sonus Faber Sonetto II G2 | |
|---|---|---|
| Price | $2,199.00 per pair used, Discontinued | $3500 per pair |
| Ranked | #97 of 134 in Large Size Bookshelf Speakers | #106 of 134 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 47Hz (measured, Erin’s Audio Corner) | 38Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 63Hz (measured, Erin’s Audio Corner) | 62Hz (measured, Erin’s Audio Corner) |
| Impedance | 4 ohms nominal (4.8 ohms minimum above 80Hz, measured by Erin’s Audio Corner) | 4 ohms nominal (4.2 ohms minimum, measured by Erin’s Audio Corner) |
| Sensitivity | 86.5dB (measured average, Erin’s Audio Corner) | 87dB (measured, Erin’s Audio Corner) |
| Drivers | 26mm tweeter + 165mm mid-woofer | 1x 6.5” mid-woofer (paper cone), 1x 1.1” (28mm) DAD soft dome tweeter |
| Weight | 39.9 lbs (18.1 kg) | 38.4 lbs (17.4 kg) |
| Dimensions | 15.4”H x 8.9”W x 11”D (390.0 x 225.0 x 280.0 mm) | 16.3”H x 8.9”W x 14”D (414.3 x 227.0 x 355.6 mm) |
| Woofer Cabinet | ported, front | ported, front |
| Spinorama Preference Score | 4.64 | 4.25 |
| Spinorama Preference Score with Perfect Sub | 7.00 | 6.54 |
| DIY Kit | No | No |
Related Speaker Comparisons
More worthwhile head-to-heads for Focal Aria 906:
- Focal Aria 906 vs AsciLab C6B
- KEF R3 Meta vs Focal Aria 906
- KEF Q Concerto Meta vs Focal Aria 906
- Focal Aria 906 vs KEF R3
- MoFi SourcePoint 8 vs Focal Aria 906
Prices on this page were last checked October 2, 2026 at 10:18 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Focal Aria 906: $2,199.00 per pair used Discontinued Amazon eBay
Newer model: the Focal Aria Evo X N°1. It’s likely to perform similarly, though we don’t have measurements to confirm that yet.
Pros: CEA2034 spinorama shows very flat bass response, with the reviewer rating overall performance “good.” Predicted in-room response is almost perfect prior to 1kHz. Horizontal dispersion of about ±60 degrees is good and stays even out to about -12dB before getting erratic. Woofer distortion is quite low at 86dB SPL/1m. Measured bass extension of 63Hz (-3dB), with a measured sensitivity of 86.5dB.
Cons: 3dB dip around 2.8kHz. Some resonance around 800Hz, small directivity error around 7kHz. A dip in the upper midrange also shows up in the predicted in-room response. Distortion becomes problematic at 96dB SPL/1m, with a notable peak around 1.3-1.5kHz alongside broader midrange elevation. Discontinued.
Full Focal Aria 906 review and specifications →
| Bass Extension (-10dB) | 47Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 63Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 15.4”H x 8.9”W x 11”D (390.0 x 225.0 x 280.0 mm) |
| Drivers | 26mm tweeter + 165mm mid-woofer |
| Impedance | 4 ohms nominal (4.8 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Sensitivity | 86.5dB (measured average, Erin’s Audio Corner) |
| Spinorama Preference Score | 4.64 |
| Spinorama Preference Score with Perfect Sub | 7.00 |
| Weight | 39.9 lbs (18.1 kg) |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Sonus Faber Sonetto II G2: $3500 per pair Crutchfield eBay
Pros: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range: the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Measured bass extension of 62Hz (-3dB), with a measured sensitivity of 87dB.
Cons: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals (about 1.5-2 feet in an ideal room, more or less depending on your specific room modes) or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.
Full Sonus Faber Sonetto II G2 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 62Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 16.3”H x 8.9”W x 14”D (414.3 x 227.0 x 355.6 mm) |
| Drivers | 1x 6.5” mid-woofer (paper cone), 1x 1.1” (28mm) DAD soft dome tweeter |
| Impedance | 4 ohms nominal (4.2 ohms minimum, measured by Erin’s Audio Corner) |
| Sensitivity | 87dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 4.25 |
| Spinorama Preference Score with Perfect Sub | 6.54 |
| Weight | 38.4 lbs (17.4 kg) |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Sonus Faber Sonetto II G2 vs Audio Craftsmen Victoria
- Sonus Faber Sonetto II G2 vs Emotiva Airmotiv B2+
- Sonus Faber Sonetto II G2 vs Pylon Jasper Monitor 18
- Sonus Faber Sonetto II G2 vs JBL XPL-90
- Sonus Faber Sonetto II G2 vs KEF Q350
- Sonus Faber Sonetto II G2 vs Sonus Faber Lumina II Amator
- Sonus Faber Sonetto II G2 vs Polk R200
- Sonus Faber Sonetto II G2 vs Klipsch RP-600M
- See all 59 comparisons