Short answer: the Final Audio E2000, though neither ranks well in its class. It ranks #1123 of 1291 in-ear headphones by sound quality, rated 2.3/5, at $38.90; the Tin HiFi T2 ranks #1124, rated 2.2/5, and costs $45, so there is not much of a tradeoff to weigh. Both are rated below 3.0/5 among the 1291 in-ear headphones; for better sound, the Intuaura Reference 2019 ranks #7 at $34.99.
The case for the Final Audio E2000: Lower mids sit within about 0.7 dB of target, keeping voices and guitars natural. The catch: Presence sits about 5.4 dB low with an 8 dB dip near 11.5 kHz, so vocals and instruments lose some bite.
Why pick the Tin HiFi T2: It costs little and runs easily from a phone at 16 ohms and 102 dB/mW. The catch: In oratory1990’s measurement sub-bass falls 6 dB below target by 60 Hz and sits 10 dB down at 30 Hz, so kick drums and bass lines sound thin.
Buy the Final Audio E2000. It is rated higher for sound quality than the Tin HiFi T2 and costs less, which makes it the one to get unless you need something the other one does better.
Looking for alternatives? See the complete Headphones rankings.
Lower mids sit within about 0.7 dB of target, keeping voices and guitars natural.
Amazon $38.90 eBay
It costs little and runs easily from a phone at 16 ohms and 102 dB/mW.
Amazon $45.00 eBayPrices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| Final Audio E2000 | Tin HiFi T2 | |
|---|---|---|
| Price | $38.90 | $45.00 |
| Ranked | #1123 of 1291 in In-Ear Headphones | #1124 of 1291 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 6.4mm dynamic | 1 x 10mm dynamic + 1 x 6mm dynamic |
| Impedance | 16 ohms | 16 ohms |
| Sensitivity | 102 dB/mW | 102 dB/mW |
| Weight | 0 lbs (12g) | - |
| Harman Preference Score | 53 (measured by crinacle, via AutoEQ) | 52 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 3.88 dB standard deviation | 3.70 dB standard deviation |
| Tonal Tilt | -0.25 (negative is warmer, positive brighter) | +0.58 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-4.9 dB at 30 Hz) | Falls 6 dB below target at 60 Hz (-10.0 dB at 30 Hz) |
| Back | - | Closed |
| Frequency Response | - | 12Hz - 40kHz (Manufacturer specified) |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the Final Audio E2000 from eplv, rg, superreview and zerostresslevel; the Tin HiFi T2 from achoreviews, aden, ankramutt, arc, atechreviews, csi-zone, iemworld, listener, lown-fi, musicafe, precog, soundcheck39, soundignity, superreview, suporsalad and therollo9, all via squig.link.
Related Headphone Comparisons
More top alternatives to Final Audio E2000: