Short answer: the ELAC DF63. It ranks #27 of 56 floorstanding speakers by sound quality at $649; the Klipsch Heresy IV ranks #34 and costs $3198, so there is not much of a tradeoff to weigh.
What the ELAC DF63 gets right: Three-driver floorstanding layout: two 6” dedicated midbase drivers plus a separate 6” mid-range driver (confirmed by measuring different driver impedance/inductance) and a 1” dome tweeter. The catch: A genuine measured resonance around 200-300Hz (visible in frequency response, impedance, and group delay) causes an audible “droning” coloration on female vocals.
The case for the Klipsch Heresy IV: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement—well below Klipsch’s 99dB in-room claim, but still excellent—and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. The tradeoff: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction.
Buy the ELAC DF63. It ranks higher for sound quality than the Klipsch Heresy IV and costs less, so there is no real case for the other one.
Specifications Side By Side
| ELAC DF63 | Klipsch Heresy IV | |
|---|---|---|
| Price | $649.00 | $3,198/pair |
| Ranked | #27 of 56 in Large Size Floorstanding Speakers | #34 of 56 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 29Hz (measured, Erin’s Audio Corner) | - |
| Bass Extension (-3dB) | 71Hz (measured, Erin’s Audio Corner) | 77Hz (measured, Erin’s Audio Corner) |
| Dimensions | 43.1"H x 7.7"W x 10.6"D (1094.7 x 195.6 x 269.2 mm) | 24.8"H x 15.6"W x 13.3"D |
| Impedance | 6 ohms nominal (3.4 ohms minimum, measured, Erin’s Audio Corner) | Approximately 4 ohms minimum (measured, Erin’s Audio Corner) |
| Drivers | Two 6.5" Aramid Fiber woofer, 6.5" Aramid Fiber midrange, 1" Aluminum Dome tweeter | 1" horn-loaded tweeter; 1.75" horn-loaded midrange; 12" woofer |
| Sensitivity | 86.6dB (measured, Erin’s Audio Corner) | 94.5dB/2.83V/1m (measured, Erin’s Audio Corner) |
| Weight | 58.2 lbs / 26.4 kg each | 45 lb each |
| Woofer Cabinet | ported, rear | ported, rear |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Polk Audio Reserve R700 vs PSB Imagine T65
- Q Acoustics 5040 vs PSB Imagine T65
- PSB Imagine T65 vs KEF Q11 Meta
- Infinity Primus 360 vs Klipsch Heresy IV
- Polk Reserve R500 vs Klipsch Heresy IV
The Two Speakers In Full
ELAC DF63: $649.00 Amazon
Pros: Three-driver floorstanding layout: two 6” dedicated midbase drivers plus a separate 6” mid-range driver (confirmed by measuring different driver impedance/inductance) and a 1” dome tweeter, each woofer given its own stuffed chamber inside the cabinet. The dedicated midrange driver keeps distortion low even at higher output, avoiding the intermodulation grain typical of two-way bookshelf designs. The waveguide keeps high-frequency directivity well controlled, and overall horizontal directivity is good up to about 2kHz. Harmonic distortion looks good at both 86dB and 96dB, and multitone distortion stays below the reviewer’s 3% threshold. A shallow bass rolloff (F3 71Hz, F10 29Hz) lets it extend fairly low without a hard cutoff. Preferred by the reviewer over the similarly-priced Polk R500 (too much high-frequency narrowing, less neutral) and considered ahead of the Polk R700 as well.
Cons: A genuine measured resonance around 200-300Hz (visible in frequency response, impedance, and group delay) causes an audible “droning” coloration on female vocals. A mild peak around 10kHz makes shakers and similar high-frequency percussion jump too far forward in the mix; needed about 2dB of EQ to tame in testing. A dip in the 1-3kHz range gives the speaker a warm, slightly veiled character - the reviewer suspects the tweeter crossover point (around 2-3kHz) is set a bit high and could be lowered to fill this in. Directivity shows a noticeable handoff mismatch around 2.5kHz where the midrange driver hands off to the tweeter, though it’s minor at the -6dB point. Vertical directivity is narrower than horizontal, so listeners need to stay close to the tweeter axis. Low EPDR (about 1.5 ohms minimum) means a Class AB amplifier should be well-ventilated. Best positioned pointed directly at the listener and closer to the front wall - toeing it out into the room causes too much high-frequency rolloff.
Full ELAC DF63 review and specifications →
| Bass Extension (-10dB) | 29Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 71Hz (measured, Erin's Audio Corner) |
| Dimensions | 43.1"H x 7.7"W x 10.6"D (1094.7 x 195.6 x 269.2 mm) |
| Drivers | Two 6.5" Aramid Fiber woofer, 6.5" Aramid Fiber midrange, 1" Aluminum Dome tweeter |
| Impedance | 6 ohms nominal (3.4 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 86.6dB (measured, Erin's Audio Corner) |
| Weight | 58.2 lbs / 26.4 kg each |
| Woofer Cabinet | ported, rear |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Klipsch Heresy IV: $3,198/pair Amazon Crutchfield
Pros: Very high 94.5dB/2.83V/1m sensitivity in Erin’s anechoic measurement—well below Klipsch’s 99dB in-room claim, but still excellent—and strong short-term output from a 12-inch woofer plus horn-loaded midrange and tweeter. The compact, furniture-grade Heritage cabinet is easier to place than most high-efficiency designs, and dynamics at moderate levels can sound lively. A stable four-ohm-capable amplifier can produce substantial SPL with relatively little voltage.
Cons: Erin measured a 77Hz F3 and response rolling away near 100Hz in-room, so a subwoofer is required for modern full-range reproduction. The impedance dips to about 4 ohms, reducing the practical amplifier advantage implied by its sensitivity. Pronounced directivity mismatch at the driver transitions, impedance/response resonances and elevated distortion spikes around the crossover remain audible concerns that EQ cannot fully solve. At 102dB Erin measured roughly 1.5dB midband compression; at 96dB distortion rises around crossover. Performance is difficult to justify at the price, and Erin explicitly did not recommend it.
Full Klipsch Heresy IV review and specifications →
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) |
|---|---|
| Dimensions | 24.8"H x 15.6"W x 13.3"D |
| Drivers | 1" horn-loaded tweeter; 1.75" horn-loaded midrange; 12" woofer |
| Impedance | Approximately 4 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 94.5dB/2.83V/1m (measured, Erin's Audio Corner) |
| Weight | 45 lb each |
| Woofer Cabinet | ported, rear |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch Heresy IV vs Klipsch Forte IV
- Klipsch Heresy IV vs KEF Q11 Meta
- Klipsch Heresy IV vs Infinity Primus 360
- Klipsch Heresy IV vs Definitive Technology BP-9020
- Klipsch Heresy IV vs Klipsch RP-5000F II
- Klipsch Heresy IV vs SVS Ultra Evolution Pinnacle
- Klipsch Heresy IV vs Polk Reserve R500
- Klipsch Heresy IV vs PSB Imagine T65
- See all 14 comparisons