Short answer: the KEF LS50 Wireless II for better sound quality, the Dynaudio LYD 5 for the lower price. The KEF LS50 Wireless II ranks #16 of 64 powered bookshelf speakers at $2999. The Dynaudio LYD 5 ranks #45 at $1000, $1999 cheaper.
What the Dynaudio LYD 5 offers: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter. Watch for: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.
What the KEF LS50 Wireless II offers: Uni-Q coincident driver array (130mm aluminum woofer with a 25mm MAT dome tweeter mounted at its acoustic center) gives excellent, consistent off-axis dispersion, measuring the tightest directivity spread of this batch (directivity_spdi_stddev 3.96) alongside a smooth listening-window response (smoothness_listening_window 0.375, aad_on_axis 0.343). Bass extends to a genuinely deep 51.3Hz at -3dB / 41.5Hz at -10dB for a compact standmount, backed by a bi-amped 280W (LF) + 100W (HF) design. One of the most complete input sets in its class: HDMI eARC, optical, coaxial, RCA, Ethernet, AirPlay 2, Chromecast, Roon Ready, and Spotify/Tidal Connect, so it can replace a full receiver-based setup for TV, turntable, and streaming use. Watch for: Primary/Secondary architecture means one speaker handles every input while the other depends on a wireless or wired Ethernet link back to it - placement is less flexible than a fully symmetric pair. No mic-based automatic room correction, only fixed placement EQ presets in the KEF Connect app. Bass alignment Q (lfq 0.676) sits toward the higher end of typical ported values. At $2,999.99/pair it’s roughly double the price of KEF’s own smaller LSX II.
Buy the Dynaudio LYD 5 if the price matters more than sound quality. Buy the KEF LS50 Wireless II if sound quality matters more than the price.
Specifications Side By Side
| Dynaudio LYD 5 | KEF LS50 Wireless II | |
|---|---|---|
| Price | $1000 | $2,999.00 |
| Ranked | #45 of 64 in Medium Size Powered Bookshelf Speakers | #16 of 64 in Medium Size Powered Bookshelf Speakers |
| Bass Extension (-3dB) | 68Hz (measured, Audio Science Review) | 51.3Hz (measured, spinorama.org) |
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) | 41.5Hz (measured, spinorama.org) |
| Dimensions | 10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm) | 12" x 7.9" x 12.2" (305 x 200 x 311 mm) (12.0 x 7.9 x 12.2 in) each |
| Frequency Response | 50Hz - 21kHz (Manufacturer specified) | 45Hz - 28kHz ±3dB |
| Weight | 11.9 lbs / 5.4 kg each | 44.3 lbs / 20.1 kg (44.3 lb) for the pair |
| Drivers | 5" woofer, 28mm soft dome tweeter | Uni-Q coincident array: 130mm aluminum woofer + 25mm MAT aluminum dome tweeter |
| App | No | KEF Connect (placement EQ presets, source selection, firmware updates) |
| EQ | No | Yes, fixed placement presets (desk/bookshelf/wall-mount) - no automatic room correction |
| DSP | No | - |
| Output Power | 100W total (50W LF, 50W HF) | 280W (LF) + 100W (HF) per speaker, bi-amped |
| Inputs | - | HDMI eARC, optical, digital coaxial, 3.5mm analog, USB-A (service), Ethernet, RCA subwoofer out |
| Bluetooth | - | Yes, 4.2 |
| Max SPL | - | 108dB at 1m |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Kali Audio SM-5 vs Airpulse A100
- Edifier S1000W vs Kali Audio SM-5
- Kali Audio SM-5 vs Kali Audio IN-5
- KEF LS50 Wireless II vs Airpulse A100
- Dynaudio LYD 5 vs Kali Audio SM-5
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Dynaudio LYD 5: $1000 Bhphotovideo eBay
Pros: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter.
Cons: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.
Full Dynaudio LYD 5 review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 68Hz (measured, Audio Science Review) |
| DSP | No |
| Dimensions | 10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm) |
| Drivers | 5" woofer, 28mm soft dome tweeter |
| EQ | No |
| Frequency Response | 50Hz - 21kHz (Manufacturer specified) |
| Output Power | 100W total (50W LF, 50W HF) |
| Weight | 11.9 lbs / 5.4 kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
KEF LS50 Wireless II: $2,999.00 Amazon KEF Crutchfield eBay
Pros: Uni-Q coincident driver array (130mm aluminum woofer with a 25mm MAT dome tweeter mounted at its acoustic center) gives excellent, consistent off-axis dispersion, measuring the tightest directivity spread of this batch (directivity_spdi_stddev 3.96) alongside a smooth listening-window response (smoothness_listening_window 0.375, aad_on_axis 0.343). Bass extends to a genuinely deep 51.3Hz at -3dB / 41.5Hz at -10dB for a compact standmount, backed by a bi-amped 280W (LF) + 100W (HF) design. One of the most complete input sets in its class: HDMI eARC, optical, coaxial, RCA, Ethernet, AirPlay 2, Chromecast, Roon Ready, and Spotify/Tidal Connect, so it can replace a full receiver-based setup for TV, turntable, and streaming use.
Cons: Primary/Secondary architecture means one speaker handles every input while the other depends on a wireless or wired Ethernet link back to it - placement is less flexible than a fully symmetric pair. No mic-based automatic room correction, only fixed placement EQ presets in the KEF Connect app. Bass alignment Q (lfq 0.676) sits toward the higher end of typical ported values. At $2,999.99/pair it’s roughly double the price of KEF’s own smaller LSX II.
Full KEF LS50 Wireless II review and specifications →
| App | KEF Connect (placement EQ presets, source selection, firmware updates) |
|---|---|
| Bass Extension (-10dB) | 41.5Hz (measured, spinorama.org) |
| Bass Extension (-3dB) | 51.3Hz (measured, spinorama.org) |
| Bluetooth | Yes, 4.2 |
| Dimensions | 12" x 7.9" x 12.2" (305 x 200 x 311 mm) (12.0 x 7.9 x 12.2 in) each |
| Drivers | Uni-Q coincident array: 130mm aluminum woofer + 25mm MAT aluminum dome tweeter |
| EQ | Yes, fixed placement presets (desk/bookshelf/wall-mount) - no automatic room correction |
| Frequency Response | 45Hz - 28kHz ±3dB |
| Inputs | HDMI eARC, optical, digital coaxial, 3.5mm analog, USB-A (service), Ethernet, RCA subwoofer out |
| Max SPL | 108dB at 1m |
| Output Power | 280W (LF) + 100W (HF) per speaker, bi-amped |
| Weight | 44.3 lbs / 20.1 kg (44.3 lb) for the pair |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- KEF LS50 Wireless II vs Airpulse A100
- KEF LS50 Wireless II vs Kali Audio IN-5
- KEF LS50 Wireless II vs KRK Rokit 5 G4
- KEF LS50 Wireless II vs Vanatoo Transparent Zero Plus
- KEF LS50 Wireless II vs Yamaha HS5
- KEF LS50 Wireless II vs Presonus Eris E5 XT
- KEF LS50 Wireless II vs Adam Audio T5V
- KEF LS50 Wireless II vs IK Multimedia iLoud MTM MKII
- See all 34 comparisons