These are not really the same size class, and that is the honest framing here. The Dynaudio Emit 30 ranks #59 of 89 floorstanding speakers by sound quality at $1,274.25; the Dynaudio Emit 10 ranks #53 of 101 bookshelf speakers by sound quality at $599.
The case for the Dynaudio Emit 30: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. The catch: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven (sometimes soft, sometimes forward) depending on the specific instrument or frequency being reproduced; male vocals can lack presence and cymbals can lack sizzle as a result.
Why pick the Dynaudio Emit 10: A two-way bookshelf speaker with a 28mm Cerotar soft-dome tweeter and a 14cm MSP mid-bass driver, crossed over at 3,700Hz. The catch: No independent measurements yet, so its sound can’t be compared with ranked speakers.
Buy the Dynaudio Emit 30 at $1,274.25 if you want a floorstanding speaker. Buy the Dynaudio Emit 10 at $599 if you want a bookshelf speaker instead.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Dynaudio Emit 30 | Dynaudio Emit 10 | |
|---|---|---|
| Price | $1,274.25 per pair | $599.00 per pair |
| Ranked | #59 of 89 in Large Size Floorstanding Speakers | #53 of 101 in Medium Size Bookshelf Speakers |
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) | - |
| Bass Extension (-3dB) | 44Hz (measured, Erin’s Audio Corner) | - |
| Drivers | Dual 5.25” mid-woofers, 1” soft dome tweeter | 28mm Cerotar soft dome tweeter + 14cm MSP mid-bass |
| Weight | 34.2 lbs (15.5 kg) | 14.1 lbs (6.4 kg) |
| Sensitivity | 87dB | 86dB (2.83V/1m) |
| Impedance | 4 ohms | 6 ohms |
| Dimensions | 35.4”H x 6.7”W x 10.7”D (900.0 x 170.0 x 272.0 mm) | 11.4”H x 6.7”W x 10.7”D (290 x 170 x 272 mm) |
| Woofer Cabinet | ported, rear (dual) | - |
| Frequency Response | 44Hz - 25kHz (±3dB, manufacturer specified) | 64Hz - 25kHz (+/-3dB) (Manufacturer specified) |
| Power Handling | 180W (IEC rated) | - |
| Country | Denmark | - |
| Spinorama Preference Score | 3.84 | - |
| Spinorama Preference Score with Perfect Sub | 5.69 | - |
| DIY Kit | No | - |
| Crossover Frequency | - | 3700Hz |
| Enclosure | - | ported, rear |
Related Speaker Comparisons
How Dynaudio Emit 10 compares with other leading options:
- Dynaudio Emit 30 vs Infinity Primus 360
- Definitive Technology BP-9020 vs Dynaudio Emit 30
- Dynaudio Emit 30 vs Polk T50
- Polk Audio XT60 vs Dynaudio Emit 30
- Dynaudio Emit 30 vs Sony SS-CS3
Prices on this page were last checked October 4, 2026 at 9:58 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Dynaudio Emit 30: $1,274.25 per pair Amazon eBay
Pros: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. The two woofers hand off at staggered crossover points (around 1kHz and 3.5kHz) rather than sharing one, which avoids the acoustic lobing a shared crossover point would cause between the tweeter and the lower woofer, and adds a few dB of sensitivity in the process. Genuinely deep bass for a speaker around this price: measured F3 near 44Hz and extends audibly down to about 40Hz in-room without much difficulty. Harmonic distortion measures clean and low at both 86dB and 96dB SPL/1m. Good CTA-2034 sound power and uniform directivity mean the speaker takes EQ correction well if a listener wants to dial in its one tonal weak point. Dynamic range and compression performance are strong overall, with only a minor, high-Q compression artifact tied to a cone-edge resonance that’s unlikely to be audible. Wide, consistent horizontal dispersion around ±70° with just a small ~10° narrowing between 1-3kHz, and a reasonably forgiving ±20° vertical window centered on the tweeter axis. Measured bass extension of 44Hz (-3dB).
Cons: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven (sometimes soft, sometimes forward) depending on the specific instrument or frequency being reproduced; male vocals can lack presence and cymbals can lack sizzle as a result. A cone-edge surround resonance shows up around 1-1.3kHz in burst-decay measurements (a trait the reviewer has also seen on other Dynaudio models) and lines up with elevated multitone distortion across roughly 600Hz-1.5kHz. An enclosure resonance appears around 350Hz in the impedance curve. Placed too close to a rear wall, the dual ports make the bass noticeably boomy: pulling the speaker out is needed to keep the low end from overloading the room. Fully resolving the top-end inconsistency needs a modest EQ correction (roughly +2dB with a Q of about 1, centered 3-6kHz), so out-of-the-box tonal accuracy in that band isn’t quite class-leading despite otherwise strong measured performance.
Full Dynaudio Emit 30 review and specifications →
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 44Hz (measured, Erin’s Audio Corner) |
| Country | Denmark |
| DIY Kit | No |
| Dimensions | 35.4”H x 6.7”W x 10.7”D (900.0 x 170.0 x 272.0 mm) |
| Drivers | Dual 5.25” mid-woofers, 1” soft dome tweeter |
| Frequency Response | 44Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms |
| Power Handling | 180W (IEC rated) |
| Sensitivity | 87dB |
| Spinorama Preference Score | 3.84 |
| Spinorama Preference Score with Perfect Sub | 5.69 |
| Weight | 34.2 lbs (15.5 kg) |
| Woofer Cabinet | ported, rear (dual) |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit 30 vs Klipsch RP-6000F II
- Dynaudio Emit 30 vs Klipsch RP-8000F II
- Dynaudio Emit 30 vs Definitive Technology BP-9020
- Dynaudio Emit 30 vs SVS Ultra Evolution Pinnacle
- Dynaudio Emit 30 vs Klipsch RP-5000F II
- Dynaudio Emit 30 vs Polk T50
- Dynaudio Emit 30 vs KEF Q11 Meta
- Dynaudio Emit 30 vs Focal Aria Evo X N°2
- See all 45 comparisons
Dynaudio Emit 10: $599.00 per pair Estimated Amazon eBay
Older model: the Dynaudio Emit M10 (ranked lower, rated 3/5).
Pros: A two-way bookshelf speaker with a 28mm Cerotar soft-dome tweeter and a 14cm MSP mid-bass driver, crossed over at 3,700Hz. Dynaudio rates it at 64Hz-25kHz within 3dB, 86dB sensitivity and 6 ohms, with a rear double-flared port. Magnetic grilles are included.
Cons: No independent measurements yet, so its sound can’t be compared with ranked speakers. The rear port needs some space from the wall, and 86dB sensitivity asks for a reasonably powerful amplifier.
Full Dynaudio Emit 10 review and specifications →
| Crossover Frequency | 3700Hz |
|---|---|
| Dimensions | 11.4”H x 6.7”W x 10.7”D (290 x 170 x 272 mm) |
| Drivers | 28mm Cerotar soft dome tweeter + 14cm MSP mid-bass |
| Enclosure | ported, rear |
| Frequency Response | 64Hz - 25kHz (+/-3dB) (Manufacturer specified) |
| Impedance | 6 ohms |
| Sensitivity | 86dB (2.83V/1m) |
| Weight | 14.1 lbs (6.4 kg) |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons