Short answer: the Cambridge Audio Minx Min 22, though neither ranks well in its class. It ranks #140 of 168 bookshelf speakers by sound quality, rated 2.4/5, at $258. The Cambridge Audio Minx Min 12 ranks #144, rated 2.3/5, at $198, $60 cheaper, a saving that is not big enough to make up the sound-quality gap. Both are rated below 3.0/5 among the 168 bookshelf speakers; for better sound, the Neumi BS5 ranks #38 at $139.99.
The case for the Cambridge Audio Minx Min 12: A tiny satellite speaker, under 8cm on each side, with a single 2.25” BMR driver that covers the whole range above the bass and spreads sound widely. The catch: It is meant to be used with a subwoofer: Cambridge rates it only down to 150Hz.
The case for the Cambridge Audio Minx Min 22: A taller Cambridge Audio Minx Min 12 with a second BMR driver for more output, still small enough for a shelf or wall bracket at 1.7 lbs (0.75 kg). Watch for: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers.
Buy the Cambridge Audio Minx Min 22. It is rated higher for sound quality, and the $60 you would save on the Cambridge Audio Minx Min 12 does not close the gap.
About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Cambridge Audio Minx Min 12 1.9 to 2.7; Cambridge Audio Minx Min 22 2.0 to 2.8). Treat this verdict as provisional.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Cambridge Audio Minx Min 12 | Cambridge Audio Minx Min 22 | |
|---|---|---|
| Price | $198 per pair | $258 per pair |
| Ranked | #144 of 168 in Medium Size Bookshelf Speakers Estimated | #140 of 168 in Medium Size Bookshelf Speakers Estimated |
| Bass Extension (-3dB) | 169.5Hz (measured, Spinorama data) | - |
| Bass Extension (-10dB) | about 128.8Hz (measured, Spinorama data) | - |
| Drivers | 2.25” BMR full-range driver | 2x Balanced Mode Radiator drivers |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) | 88dB (manufacturer specified) |
| Impedance | 8 ohms | 8 ohms nominal (manufacturer specified) |
| Frequency Response | 150Hz-20kHz (manufacturer specified) | 120Hz - 20kHz (manufacturer specified) |
| Woofer Cabinet | sealed | - |
| Dimensions | 3.1”H x 3.1”W x 3.3”D (78 x 78 x 85 mm) | 6.1”H x 3.1”W x 3.3”D (154 x 78 x 85 mm) |
| Weight | 0.9 lbs (0.43 kg) each | 1.7 lbs (0.75 kg) each |
| DIY Kit | No | - |
| Enclosure | - | High-gloss ABS |
Related Speaker Comparisons
More worthwhile head-to-heads for Cambridge Audio Minx Min 22:
- Wharfedale Diamond 220 vs Micca RB42
- JBL Stage A120 vs Micca RB42
- Micca RB42 vs Boston Acoustics A25
- Q Acoustics 3020i vs Micca RB42
- ELAC Debut 2.0 B5.2 vs Micca RB42
Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Cambridge Audio Minx Min 12: $198 per pair Estimated Cambridge Audio eBay
Same family: the Cambridge Audio Minx Min 22 (larger bookshelf, ranked higher, estimated 2.4/5).
Pros: A tiny satellite speaker, under 8cm on each side, with a single 2.25” BMR driver that covers the whole range above the bass and spreads sound widely. It mounts easily on a wall or shelf. Measured bass extension of 169.5Hz (-3dB).
Cons: It is meant to be used with a subwoofer: Cambridge rates it only down to 150Hz. The only measurements, from audiore.kr, are not valid below 500Hz, so it has no preference score and the rating is estimated from that data and its size.
Full Cambridge Audio Minx Min 12 review and specifications →
| Bass Extension (-10dB) | about 128.8Hz (measured, Spinorama data) |
|---|---|
| Bass Extension (-3dB) | 169.5Hz (measured, Spinorama data) |
| DIY Kit | No |
| Dimensions | 3.1”H x 3.1”W x 3.3”D (78 x 78 x 85 mm) |
| Drivers | 2.25” BMR full-range driver |
| Frequency Response | 150Hz-20kHz (manufacturer specified) |
| Impedance | 8 ohms |
| Sensitivity | 86dB (2.83V/1m, manufacturer specified) |
| Weight | 0.9 lbs (0.43 kg) each |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
Cambridge Audio Minx Min 22: $258 per pair Estimated Cambridge Audio eBay
Same family: the Cambridge Audio Minx Min 12 (smaller bookshelf, ranked lower, estimated 2.3/5).
Pros: A taller Cambridge Audio Minx Min 12 with a second BMR driver for more output, still small enough for a shelf or wall bracket at 0.75 kg.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. Rated only from 120Hz, so it needs a subwoofer to sound full.
Full Cambridge Audio Minx Min 22 review and specifications →
| Dimensions | 6.1”H x 3.1”W x 3.3”D (154 x 78 x 85 mm) |
|---|---|
| Drivers | 2x Balanced Mode Radiator drivers |
| Enclosure | High-gloss ABS |
| Frequency Response | 120Hz - 20kHz (manufacturer specified) |
| Impedance | 8 ohms nominal (manufacturer specified) |
| Sensitivity | 88dB (manufacturer specified) |
| Weight | 1.7 lbs (0.75 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.