Bowers & Wilkins 801 D5 vs Bowers & Wilkins 801 D4

Last updated: October 11, 2026

Short answer: the Bowers & Wilkins 801 D5. It ranks #160 of 226 floorstanding speakers by sound quality, rated 3.8/5, at $65,000. The Bowers & Wilkins 801 D4 ranks #166, rated 3.7/5, at $40,000, $25,000 cheaper, not enough of a saving to outweigh the sound-quality gap.

Bowers & Wilkins 801 D5 vs Bowers & Wilkins 801 D4

The case for the Bowers & Wilkins 801 D5: The flagship of the 800 Series Diamond D5: a 1” diamond dome tweeter, a 6” Continuum FST midrange in a turbine head and two 10” Aerofoil bass drivers. The catch: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the 800 D4 models it replaces.

What the Bowers & Wilkins 801 D4 does well: Flagship reference loudspeaker with massive dual 10-inch Aerofoil bass drivers achieving subterranean 15Hz extension and immense acoustic power. Watch for: House sound features elevated high-treble response that favors air and perceived detail over strict neutral accuracy.

Buy the Bowers & Wilkins 801 D5. It is rated higher for sound quality, and saving $25,000 with the Bowers & Wilkins 801 D4 does not make up for the sound-quality gap.

About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Bowers & Wilkins 801 D5 3.5 to 4.1; Bowers & Wilkins 801 D4 3.5 to 3.9). Treat this verdict as provisional.

Want more options? Browse the full Passive Home rankings.

Specifications Side By Side

Bowers & Wilkins 801 D5 Bowers & Wilkins 801 D4
Price$65,000 per pair$40,000 per pair
Ranked#160 of 226 in Large Size Floorstanding Speakers Estimated#166 of 226 in Large Size Floorstanding Speakers Estimated
Bass Extension (-3dB)15Hz (manufacturer specified)15Hz (manufacturer specified)
Drivers1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange, 2 x 10” (250mm) Aerofoil bass1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange in Turbine Head, 2 x 10” (250mm) Aerofoil bass units
Frequency Response15Hz - 28kHz ±3dB (manufacturer specified)15Hz - 28kHz (+/- 3dB, manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)90dB (2.83V/1m, manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Woofer Cabinetportedported, down-firing Flowport
Dimensions48.1”H x 14.6”W x 21.9”D (1221 x 372 x 556 mm)48.1”H x 17.8”W x 23.6”D (1221 x 451 x 600 mm)
Weight234.6 lbs (106.4 kg) each221.8 lbs (100.6 kg) each
DIY KitNoNo

More top alternatives to Bowers & Wilkins 801 D5:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Bowers & Wilkins 801 D5: $65,000 per pair Estimated Bowers & Wilkins eBay

Bowers & Wilkins 801 D5 ranking card

Older model: the Bowers & Wilkins 801 D4 (ranked lower, estimated 3.7/5). See every Bowers & Wilkins 800 Series generation.

Same family: the Bowers & Wilkins 805 D5 (bookshelf, estimated 3.3/5), the Bowers & Wilkins 804 D5 (smaller floorstanding, ranked lower, estimated 3.5/5), the Bowers & Wilkins 803 D5 (smaller floorstanding, ranked lower, estimated 3.6/5), the Bowers & Wilkins 802 D5 (smaller floorstanding, ranked lower, estimated 3.7/5), the Bowers & Wilkins HTM82 D5 (smaller center, estimated 3.3/5) and the Bowers & Wilkins HTM81 D5 (larger center, estimated 3.4/5).

Pros: The flagship of the 800 Series Diamond D5: a 1” diamond dome tweeter, a 6” Continuum FST midrange in a turbine head and two 10” Aerofoil bass drivers. B&W rates it to 15Hz (±3dB) with 90dB sensitivity and accepts amplifiers up to 1000W, so it can play very loud with deep bass in a large room.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared directly with measured speakers; the rating is estimated from the 800 D4 models it replaces. Bowers & Wilkins’ house voicing, which the measured Bowers & Wilkins HTM81 D4 showed as a 4.9dB spread across the listening window, is likely to carry over, so expect a less neutral balance than similarly priced Revel or KEF models. At $65000 and 106.4kg each it is a statement purchase, and the impedance falls to 3.0 ohms.

ReleasedJun 2026 (4 months ago)
Bass Extension (-3dB)15Hz (manufacturer specified)
DIY KitNo
Dimensions48.1”H x 14.6”W x 21.9”D (1221 x 372 x 556 mm)
Drivers1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange, 2 x 10” (250mm) Aerofoil bass
Frequency Response15Hz - 28kHz ±3dB (manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight234.6 lbs (106.4 kg) each
Woofer Cabinetported

Bowers & Wilkins 801 D4: $40,000 per pair Estimated Bowers & Wilkins eBay

Bowers & Wilkins 801 D4 ranking card

Newer model: the Bowers & Wilkins 801 D5, ranked higher, estimated 3.8/5, released Jun 2026. See every Bowers & Wilkins 800 Series generation.

Same family: the Bowers & Wilkins 805 D4 (bookshelf, estimated 3.2/5), the Bowers & Wilkins 804 D4 (smaller floorstanding, ranked lower, estimated 3.4/5), the Bowers & Wilkins 803 D4 (smaller floorstanding, ranked lower, estimated 3.5/5), the Bowers & Wilkins 802 D4 (smaller floorstanding, ranked lower, estimated 3.6/5) and the Bowers & Wilkins HTM81 D4 (center, rated 3.3/5).

Pros: Flagship reference loudspeaker with massive dual 10-inch Aerofoil bass drivers achieving subterranean 15Hz extension and immense acoustic power. Superb mechanical damping and resonance control.

Cons: House sound features elevated high-treble response that favors air and perceived detail over strict neutral accuracy. Substantial 222-lb weight per tower demands specialized handling and dedicated high-current amplification.

ReleasedSep 2021 (5 years ago)
Bass Extension (-3dB)15Hz (manufacturer specified)
DIY KitNo
Dimensions48.1”H x 17.8”W x 23.6”D (1221 x 451 x 600 mm)
Drivers1” (25mm) Diamond dome tweeter, 6” (150mm) Continuum cone FST midrange in Turbine Head, 2 x 10” (250mm) Aerofoil bass units
Frequency Response15Hz - 28kHz (+/- 3dB, manufacturer specified)
Impedance8 ohms nominal, 3.0 ohms minimum (manufacturer specified)
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight221.8 lbs (100.6 kg) each
Woofer Cabinetported, down-firing Flowport