Bowers & Wilkins 606 S3 vs DALI Sonik 3

Last updated: October 11, 2026

Short answer: the Bowers & Wilkins 606 S3. Both are rated 3.9/5 for sound quality (#104 and #107 of 214 bookshelf speakers), and the Bowers & Wilkins 606 S3 costs $1,100 against $1,200 for the DALI Sonik 3, with sound quality a draw, the lower price decides it.

Bowers & Wilkins 606 S3 vs DALI Sonik 3

The case for the Bowers & Wilkins 606 S3: Standmount loudspeaker in the 600 Series featuring a 6.5-inch Continuum cone mid/bass driver and an acoustically decoupled 1-inch Titanium Dome tweeter. Watch for: Rating estimated based on 600 S3 series sibling testing.

Why pick the DALI Sonik 3: A bigger DALI Sonik 1 with a 7” Clarity Cone woofer and the same 29mm soft dome tweeter, rated from 47Hz (±3dB) at 87dB. The tradeoff: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers.

Buy the Bowers & Wilkins 606 S3. Both are rated the same for sound quality, and it costs $100 less than the DALI Sonik 3.

About the ratings: neither speaker has been measured yet, so both ratings are estimated from measured siblings and predecessors (likely ranges: Bowers & Wilkins 606 S3 3.7 to 4.1; DALI Sonik 3 3.6 to 4.2). Treat this verdict as provisional.

Want more options? Browse the full Passive Home rankings.

Specifications Side By Side

Bowers & Wilkins 606 S3 DALI Sonik 3
Price$1,100.00 per pair$1,200.00 per pair
Ranked#104 of 214 in Large Size Bookshelf Speakers Estimated#107 of 214 in Large Size Bookshelf Speakers Estimated
Drivers1” (25mm) Decoupled Titanium Dome tweeter, 6.5” (165mm) Continuum cone mid/bass1x 1.1” soft dome tweeter (29mm), 1x 7” Clarity Cone SMC woofer
Frequency Response52Hz - 28kHz (±3dB, manufacturer specified)47Hz - 26kHz (±3dB, manufacturer specified)
Sensitivity88dB (2.83V/1m, manufacturer specified)87dB (manufacturer specified)
Impedance8 ohms nominal, 3.7 ohms minimum (manufacturer specified)6 ohms nominal (manufacturer specified)
Bass Extension (-3dB)52Hz (manufacturer specified)47Hz (manufacturer specified)
Bass Extension (-6dB)40Hz (manufacturer specified)-
Dimensions13.5”H x 7.4”W x 11.8”D (344 x 189 x 300 mm)13.8”H x 7.9”W x 12”D (350 x 200 x 306 mm)
Weight15.5 lbs (7.05 kg) each14.3 lbs (6.5 kg) each
DIY KitNo-
Amplifier Power-25-150W recommended
Enclosure-2-way bass reflex
Country-Denmark

More top alternatives to Bowers & Wilkins 606 S3:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Bowers & Wilkins 606 S3: $1,100.00 per pair Estimated B&H Photo Video eBay

Bowers & Wilkins 606 S3 ranking card

Same family: the Bowers & Wilkins 607 S3 (smaller bookshelf, estimated 3.6/5), the Bowers & Wilkins 603 S3 (floorstanding, estimated 4.1/5) and the Bowers & Wilkins HTM6 S3 (center, estimated 3.4/5). See every Bowers & Wilkins 600 Series generation.

Pros: Standmount loudspeaker in the 600 Series featuring a 6.5-inch Continuum cone mid/bass driver and an acoustically decoupled 1-inch Titanium Dome tweeter. Delivers greater bass extension down to 52Hz and higher sensitivity (88dB) than the smaller Bowers & Wilkins 607 S3 while maintaining crisp detail retrieval.

Cons: Rating estimated based on 600 S3 series sibling testing. Displays the energetic top-end response typical of the B&W acoustic voicing, which can sound bright in acoustically untreated rooms.

ReleasedSep 2023 (3 years ago)
Bass Extension (-3dB)52Hz (manufacturer specified)
Bass Extension (-6dB)40Hz (manufacturer specified)
DIY KitNo
Dimensions13.5”H x 7.4”W x 11.8”D (344 x 189 x 300 mm)
Drivers1” (25mm) Decoupled Titanium Dome tweeter, 6.5” (165mm) Continuum cone mid/bass
Frequency Response52Hz - 28kHz (±3dB, manufacturer specified)
Impedance8 ohms nominal, 3.7 ohms minimum (manufacturer specified)
Sensitivity88dB (2.83V/1m, manufacturer specified)
Weight15.5 lbs (7.05 kg) each

DALI Sonik 3: $1,200.00 per pair Estimated Amazon eBay

DALI Sonik 3 ranking card

Same family: the DALI Sonik 1 (smaller bookshelf, estimated 3.9/5), the DALI Sonik 5 (smallest floorstanding, estimated 3.9/5), the DALI Sonik 7 (floorstanding, estimated 4/5), the DALI Sonik 9 (largest floorstanding, estimated 4.1/5), the DALI Sonik Cinema (center, estimated 3.5/5) and the DALI Sonik On-Wall (surround, estimated 3.6/5). See every DALI Zensor and Sonik generation.

Pros: A bigger DALI Sonik 1 with a 7” Clarity Cone woofer and the same 29mm soft dome tweeter, rated from 47Hz (±3dB) at 87dB.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. At 6.5 kg each with a 7” woofer it needs sturdy stands and some space from the wall.

ReleasedFeb 2026 (8 months ago)
Amplifier Power25-150W recommended
Bass Extension (-3dB)47Hz (manufacturer specified)
CountryDenmark
Dimensions13.8”H x 7.9”W x 12”D (350 x 200 x 306 mm)
Drivers1x 1.1” soft dome tweeter (29mm), 1x 7” Clarity Cone SMC woofer
Enclosure2-way bass reflex
Frequency Response47Hz - 26kHz (±3dB, manufacturer specified)
Impedance6 ohms nominal (manufacturer specified)
Sensitivity87dB (manufacturer specified)
Weight14.3 lbs (6.5 kg) each