Short answer: the BGVP Solomon. It ranks #50 of 450 in-ear headphones by sound quality, rated 4.6/5, at $229; the Kiiboom Evoke ranks #65, rated 4.5/5, at $229. The price gap is small enough that the sound-quality ranking should decide it.
What the BGVP Solomon does well: Six hobbyist measurements on squig.link put its preference score at 81.1, with bass and low mids within about 1 dB of target and sub-bass holding flat to 20 Hz. The catch: The presence region sits about 2.2 dB below target with a 3.9 dB dip near 3.1 kHz, so vocals and guitars can sound set back behind the bass and treble.
Why pick the Kiiboom Evoke: Six hobbyist measurements on squig.link give it a preference score of 80.4 with just 1.3 dB of deviation, and sub-bass is essentially flat to target at 30 Hz for full, clean rumble. The tradeoff: The overall warm tilt comes from a presence region about 3.2 dB low and treble about 2.2 dB low, with a 4.6 dB dip near 5.4 kHz, so vocals and strings can sound slightly veiled.
Buy the BGVP Solomon. It is rated higher for sound quality than the Kiiboom Evoke at the same price, so it is the default pick unless a specific strength of the other one matters more to you.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| BGVP Solomon | Kiiboom Evoke | |
|---|---|---|
| Price | $229.00 | $229.00 |
| Ranked | #50 of 450 in In-Ear Headphones | #65 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 81 (median of 6 squig.link measurements, calibrated to AutoEQ) | 80 (median of 6 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.41 dB standard deviation | 1.30 dB standard deviation |
| Tonal Tilt | -0.12 (negative is warmer, positive brighter) | -0.47 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (2 dynamic + 3 balanced armature + 2 electrostatic + 2 bone conduction) | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 2 x 8mm dynamic + 3 x balanced armature + 2 x electrostatic + 2 x bone conduction | 1 x 10mm dynamic + 2 x balanced armature |
| Impedance | 7.3 ohms | 15 ohms |
| Sensitivity | 130.8 dB/Vrms | 108 dB |
| Built-in Microphone | No | - |
| Frequency Response | - | 20Hz - 44kHz (Manufacturer specified) |
Related Headphone Comparisons
How BGVP Solomon compares with other leading options:
- BGVP Solomon vs Kiwi Ears Quintet
- BGVP Solomon vs Shuoer Cadenza 4
- Kiiboom Evoke vs Simgot SuperMix 5
- Kiwi Ears Quintet vs Kiiboom Evoke
- Kiiboom Evoke vs Sony WF-1000XM6
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
BGVP Solomon: $229.00 Amazon eBay
Pros: Six hobbyist measurements on squig.link put its preference score at 81.1, with bass and low mids within about 1 dB of target and sub-bass holding flat to 20 Hz. The air band runs about 5.3 dB hot above 10 kHz, which adds an open, airy edge to strings and room ambience for listeners who like a lively top end. Very high sensitivity of 130.8 dB/Vrms means a phone or basic dongle drives it to full volume easily.
Cons: The presence region sits about 2.2 dB below target with a 3.9 dB dip near 3.1 kHz, so vocals and guitars can sound set back behind the bass and treble. A 4.8 dB peak near 10.2 kHz can make bright recordings sound slightly etched. Its very low 7.3 ohm impedance can pick up hiss from noisy sources.
Full BGVP Solomon review and specifications →
| Released | 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.41 dB standard deviation |
| Driver Type | Hybrid (2 dynamic + 3 balanced armature + 2 electrostatic + 2 bone conduction) |
| Drivers | 2 x 8mm dynamic + 3 x balanced armature + 2 x electrostatic + 2 x bone conduction |
| Form Factor | In-ear |
| Harman Preference Score | 81 (median of 6 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 7.3 ohms |
| Sensitivity | 130.8 dB/Vrms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) |
| Tonal Tilt | -0.12 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Kiiboom Evoke: $229.00 Amazon eBay
Pros: Six hobbyist measurements on squig.link give it a preference score of 80.4 with just 1.3 dB of deviation, and sub-bass is essentially flat to target at 30 Hz for full, clean rumble. Bass and low mids track within half a dB of target, and the largest treble peak is a mere 0.5 dB, so it avoids harshness entirely. With 108 dB sensitivity it runs easily from a phone or dongle.
Cons: The overall warm tilt comes from a presence region about 3.2 dB low and treble about 2.2 dB low, with a 4.6 dB dip near 5.4 kHz, so vocals and strings can sound slightly veiled. Its 15 ohm load can reveal background hiss on some sources.
Full Kiiboom Evoke review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.30 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 10mm dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 44kHz (Manufacturer specified) |
| Harman Preference Score | 80 (median of 6 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 15 ohms |
| Sensitivity | 108 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.1 dB at 30 Hz) |
| Tonal Tilt | -0.47 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons