Short answer: the AUNE Jasper. It ranks #16 of 68 in-ear headphones by sound quality (rated 4.1/5) at $239 and is still sold new; the Samsung Galaxy Buds2 ranks #20 (rated 4.0/5) and is discontinued, so it is only an option used.
Why pick the AUNE Jasper: A single 10mm dynamic driver reaches a preference score of 75 in crinacle’s measurement, with a nearly neutral tilt of 0.01. Watch for: Response is less even than the best in its class, with a standard deviation of 2.29 dB around the target, so some peaks and dips color vocals and treble.
What the Samsung Galaxy Buds2 does well: Bass and low mids sit slightly above target, about 0.9 dB at 60 to 200 Hz, which gives a warm, easy tonal balance for a preference score of 74. Watch for: Treble is uneven, with a 5.8 dB peak near 8 kHz, a 4.8 dB dip across 3 to 6 kHz, and the air band 6.5 dB low, which blurs vocal detail and makes cymbals sound splashy and then rolled off.
Buy the AUNE Jasper. It is rated higher for sound quality; the Samsung Galaxy Buds2 is no longer sold new.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| AUNE Jasper | Samsung Galaxy Buds2 | |
|---|---|---|
| Price | $239.00 | $199.00 Discontinued |
| Ranked | #16 of 68 in In-Ear Headphones | #20 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 75 (measured by crinacle, via AutoEQ) | 74 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 2.29 dB standard deviation | 2.18 dB standard deviation |
| Tonal Tilt | +0.01 (negative is warmer, positive brighter) | -0.24 (negative is warmer, positive brighter) |
| Connection | Wired | True wireless |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 11mm dynamic woofer + 1 x 6.3mm dynamic tweeter |
| Impedance | 32 ohms | - |
| Sensitivity | 102 dB/mW | - |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) | - |
| Back | Closed | Closed |
| Weight | - | 0 lbs (5 g) per earbud |
| Active Noise Cancelling | - | Yes |
| Battery Life | - | 5 hours (20 with case, ANC on; 7.5 hours, 29 with case, ANC off, Manufacturer specified) |
| Bluetooth Version | - | 5.2 |
| Bluetooth Codecs | - | SBC, AAC, Scalable |
| Built-in Microphone | - | Yes |
| IP Rating | - | IPX2 |
Related Headphone Comparisons
More top alternatives to AUNE Jasper:
- AUNE Jasper vs Beats Powerbeats Pro
- Beats Powerbeats Pro vs Samsung Galaxy Buds2
- Samsung Galaxy Buds2 vs Shuoer S12 Pro
- KZ ZSN Pro X vs KZ ZSN Pro
- 7Hz Salnotes Zero vs KZ ZSN Pro X
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
AUNE Jasper: $239.00 Amazon eBay
Pros: A single 10mm dynamic driver reaches a preference score of 75 in crinacle’s measurement, with a nearly neutral tilt of 0.01. At 32 ohms and 102 dB/mW it is easy to drive from a phone or small dongle. The manufacturer quotes a frequency range of 5 Hz to 40 kHz, and the wired design needs no charging.
Cons: Response is less even than the best in its class, with a standard deviation of 2.29 dB around the target, so some peaks and dips color vocals and treble. The Etymotic EVO has a higher rating and a smoother measurement, though at a higher price. It has no wireless features, noise cancelling or listed microphone.
Full AUNE Jasper review and specifications →
| Released | Jan 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.29 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 75 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 102 dB/mW |
| Tonal Tilt | +0.01 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.1 dB | 0.70 |
| Peak | 8,520 Hz | +7.5 dB | 0.86 |
| Peak | 155 Hz | -2.7 dB | 0.52 |
| Peak | 801 Hz | +3.1 dB | 0.84 |
| Peak | 3,153 Hz | -3.0 dB | 0.40 |
| High shelf | 10,000 Hz | -4.4 dB | 0.70 |
| Peak | 6,182 Hz | +2.1 dB | 5.90 |
| Peak | 4,821 Hz | -1.4 dB | 5.25 |
| Peak | 3,710 Hz | +0.8 dB | 4.25 |
| Peak | 38 Hz | -0.3 dB | 2.66 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Samsung Galaxy Buds2: $199.00 Discontinued Amazon eBay
Pros: Bass and low mids sit slightly above target, about 0.9 dB at 60 to 200 Hz, which gives a warm, easy tonal balance for a preference score of 74. The set offers active noise cancelling, Bluetooth 5.2, a microphone, and SBC, AAC and Scalable codec support. Each bud weighs 5 g, and a dual driver layout pairs an 11mm woofer with a 6.3mm tweeter.
Cons: Treble is uneven, with a 5.8 dB peak near 8 kHz, a 4.8 dB dip across 3 to 6 kHz, and the air band 6.5 dB low, which blurs vocal detail and makes cymbals sound splashy and then rolled off. Battery lasts about 5 hours with noise cancelling on. The IPX2 rating gives only basic splash protection, and the AUNE Jasper has a higher rating. Discontinued.
Full Samsung Galaxy Buds2 review and specifications →
| Released | Aug 2021 (5 years ago) |
|---|---|
| Active Noise Cancelling | Yes |
| Back | Closed |
| Battery Life | 5 hours (20 with case, ANC on; 7.5 hours, 29 with case, ANC off, Manufacturer specified) |
| Bluetooth Codecs | SBC, AAC, Scalable |
| Bluetooth Version | 5.2 |
| Built-in Microphone | Yes |
| Connection | True wireless |
| Deviation From Target | 2.18 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 11mm dynamic woofer + 1 x 6.3mm dynamic tweeter |
| Form Factor | In-ear |
| Harman Preference Score | 74 (measured by oratory1990, via AutoEQ) |
| IP Rating | IPX2 |
| Tonal Tilt | -0.24 (negative is warmer, positive brighter) |
| Weight | 0 lbs (5 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.7 dB | 0.70 |
| Peak | 4,739 Hz | +4.8 dB | 1.27 |
| Peak | 88 Hz | -1.9 dB | 0.26 |
| Peak | 6,935 Hz | -3.8 dB | 4.18 |
| Peak | 827 Hz | +0.9 dB | 2.57 |
| High shelf | 10,000 Hz | +3.1 dB | 0.70 |
| Peak | 1,484 Hz | -1.0 dB | 2.64 |
| Peak | 7,930 Hz | -1.3 dB | 5.82 |
| Peak | 1,026 Hz | +0.5 dB | 4.03 |
| Peak | 41 Hz | -0.2 dB | 1.94 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons