Audio-Technica ATH-M60x vs Sennheiser HD 620S

Last updated: October 11, 2026

Short answer: the Audio-Technica ATH-M60x. Both are rated 3.7/5 for sound quality (#102 and #112 of 216 over-ear headphones), and the Audio-Technica ATH-M60x costs $239 against $259.19 for the Sennheiser HD 620S, and with sound quality even, the cheaper one is the better buy.

Audio-Technica ATH-M60x vs Sennheiser HD 620S

What the Audio-Technica ATH-M60x does well: Bass from 60 to 200 Hz and the upper mids sit within about 0.3 dB of the Harman target, so the core of the sound is well balanced. Watch for: Treble is rolled off, about 2.7 dB under target from 6 to 10 kHz and 3 dB under above that, with a deep 10.9 dB dip near 10.6 kHz that dulls cymbal shimmer and air.

What the Sennheiser HD 620S does well: Bass from 60 to 200 Hz is lifted about 2.6 dB while sub-bass sits within half a dB of target, giving a punchy, well extended low end. The tradeoff: At 150 ohms and 110 dB SPL/V it is more demanding than most headphones here and benefits from a headphone amp rather than a phone.

Buy the Audio-Technica ATH-M60x. Both are rated the same for sound quality, and it costs $20.19 less than the Sennheiser HD 620S.

Still deciding? The full Headphones rankings cover every ranked option.

Specifications Side By Side

Audio-Technica ATH-M60x Sennheiser HD 620S
Price$239.00$259.19
Ranked#102 of 216 in Over-Ear Headphones#112 of 216 in Over-Ear Headphones
Form FactorOver-earOver-ear
Harman Preference Score76 (measured by oratory1990, via AutoEQ)74 (measured by oratory1990, via AutoEQ)
Deviation From Target2.73 dB standard deviation2.19 dB standard deviation
Tonal Tilt-0.28 (negative is warmer, positive brighter)-0.80 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.3 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-1.3 dB at 30 Hz)
ConnectionWiredWired
BackClosedClosed
Driver TypeDynamicDynamic
Drivers1 x 45mm dynamic1 x 42mm dynamic
Impedance38 ohms150 ohms
Sensitivity102 dB/mW110 dB SPL/V
Weight0.5 lbs (220 g)-
Frequency Response15Hz - 28kHz (Manufacturer specified)6Hz - 30kHz (Manufacturer specified)

More worthwhile head-to-heads for Audio-Technica ATH-M60x:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Audio-Technica ATH-M60x: $239.00 Amazon eBay

Audio-Technica ATH-M60x ranking card

Pros: Bass from 60 to 200 Hz and the upper mids sit within about 0.3 dB of the Harman target, so the core of the sound is well balanced. At 38 ohms, 102 dB/mW and 220 g it is easy to drive from a phone and light to wear. The closed back keeps outside noise down for monitoring and commuting.

Cons: Treble is rolled off, about 2.7 dB under target from 6 to 10 kHz and 3 dB under above that, with a deep 10.9 dB dip near 10.6 kHz that dulls cymbal shimmer and air. Sub-bass is about 3.8 dB light and the low mids about 2.3 dB light, which thins the lowest notes and vocal warmth. The Audio-Technica ATH-M50x holds a higher rating for far less money.

BackClosed
ConnectionWired
Deviation From Target2.73 dB standard deviation
Driver TypeDynamic
Drivers1 x 45mm dynamic
Form FactorOver-ear
Frequency Response15Hz - 28kHz (Manufacturer specified)
Harman Preference Score76 (measured by oratory1990, via AutoEQ)
Impedance38 ohms
Sensitivity102 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.3 dB at 30 Hz)
Tonal Tilt-0.28 (negative is warmer, positive brighter)
Weight0.5 lbs (220 g)
EQ preset to match the Harman target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+6.6 dB0.70
Peak76 Hz-5.5 dB0.37
Peak413 Hz+7.7 dB2.02
Peak1,291 Hz-3.3 dB1.36
Peak3,293 Hz+3.5 dB4.84
High shelf10,000 Hz+1.8 dB0.70
Peak6,147 Hz-2.8 dB5.09
Peak2,517 Hz+0.8 dB3.32
Peak4,312 Hz-1.6 dB6.00
Peak234 Hz-0.6 dB4.42

Sennheiser HD 620S: $259.19 Amazon eBay

Sennheiser HD 620S ranking card

Pros: Bass from 60 to 200 Hz is lifted about 2.6 dB while sub-bass sits within half a dB of target, giving a punchy, well extended low end. The upper mids and presence stay close to the target, so vocals sound natural and clear. The closed back isolates well for private listening.

Cons: At 150 ohms and 110 dB SPL/V it is more demanding than most headphones here and benefits from a headphone amp rather than a phone. Treble from 6 to 10 kHz is about 2.6 dB low with a 6.9 dB dip near 9.5 kHz, which softens cymbals and sibilance. The Audio-Technica ATH-M50x holds a higher rating for a much lower price. See headphone amps and DACs with enough power to drive it.

BackClosed
ConnectionWired
Deviation From Target2.19 dB standard deviation
Driver TypeDynamic
Drivers1 x 42mm dynamic
Form FactorOver-ear
Frequency Response6Hz - 30kHz (Manufacturer specified)
Harman Preference Score74 (measured by oratory1990, via AutoEQ)
Impedance150 ohms
Sensitivity110 dB SPL/V
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.3 dB at 30 Hz)
Tonal Tilt-0.80 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -1.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+0.4 dB0.70
Peak112 Hz-5.7 dB1.93
Peak8,995 Hz+3.2 dB1.57
Peak49 Hz+0.9 dB1.25
Peak1,644 Hz+2.0 dB3.09
High shelf10,000 Hz-4.3 dB0.70
Peak615 Hz-1.9 dB1.75
Peak234 Hz+2.0 dB3.58
Peak2,761 Hz-2.7 dB6.00
Peak843 Hz+1.6 dB4.59