AsciLab F6Bs vs Klipsch RP-600M

Last updated: October 5, 2026

Short answer: the AsciLab F6Bs. It ranks #20 of 141 bookshelf speakers by sound quality (rated 4.5/5) and is still sold new; the Klipsch RP-600M ranks #117 (rated 2.9/5) and is discontinued, so it is only an option used.

AsciLab F6Bs vs Klipsch RP-600M

The AsciLab F6Bs is the more accurate option. A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. Its measured preference score, a predictor of how neutral it sounds, is 5.24 against 3.66 for the Klipsch RP-600M. Watch for: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio.

The Klipsch RP-600M is the deeper-bass option. More linear horizontal dispersion than the updated RP-600M II: as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Its bass reaches about 73Hz before falling 3dB, against 82Hz for the AsciLab F6Bs. The catch: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out).

Buy the AsciLab F6Bs. It is rated higher for sound quality; the Klipsch RP-600M is no longer sold new.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

AsciLab F6Bs Klipsch RP-600M
Price€799 per pair$377.99 per pair Discontinued
Ranked#20 of 141 in Large Size Bookshelf Speakers#117 of 141 in Large Size Bookshelf Speakers
Enclosuresealed-
Drivers1” aluminum dome tweeter with waveguide and phase plug, 6” fiber cone woofer6.5” Cerametallic cone woofer, 1” titanium LTS vented tweeter with Tractrix horn
Dimensions14.5”H x 8”W x 6.1”D (368 x 203 x 154 mm)15.7”H x 8”W x 11.9”D (398.8 x 203.2 x 302.3 mm)
Weight12.3 lbs (5.6 kg) each16.1 lbs (7.3 kg) each
Sensitivity85.2dB @ 2.83V/1m (measured, Audio Science Review)85.2dB (measured, Erin’s Audio Corner)
Impedance4 ohms nominal, 3.7 ohms minimum8 ohms nominal, 3.5 ohms minimum (measured, Erin’s Audio Corner)
Bass Extension (-3dB)82.0Hz (measured, Audio Science Review)73Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)50.1Hz (measured, Audio Science Review)40Hz (measured, Erin’s Audio Corner)
Crossover Frequency1kHz-
MountingVESA 100 wall mount compatible-
Warranty2 years-
CountrySouth Korea-
Maximum SPL100dB full bandwidth, 102dB above 100Hz (manufacturer specified)-
Spinorama Preference Score5.243.66
Spinorama Preference Score with Perfect Sub7.905.61
DIY KitNoNo
Woofer Cabinet-ported

How AsciLab F6Bs compares with other leading options:

Prices on this page were last checked October 4, 2026 at 9:58 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

AsciLab F6Bs: €799 per pair Audiophonics eBay

AsciLab F6Bs ranking card

Pros: A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. Off axis sound tracks the on axis response unusually consistently for a sealed 2-way this size, and on axis deviation measures a clean 0.25dB average. Measured bass extension of 82.0Hz (-3dB), with a measured sensitivity of 85.2dB.

Cons: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio. Bass extension is measured at 82.0Hz at -3dB, noticeably less than the passive radiator equipped F6B, and listening window smoothness measures only a moderate 0.39. The 4 ohm nominal impedance calls for a reasonably capable amplifier.

Bass Extension (-10dB)50.1Hz (measured, Audio Science Review)
Bass Extension (-3dB)82.0Hz (measured, Audio Science Review)
CountrySouth Korea
Crossover Frequency1kHz
DIY KitNo
Dimensions14.5”H x 8”W x 6.1”D (368 x 203 x 154 mm)
Drivers1” aluminum dome tweeter with waveguide and phase plug, 6” fiber cone woofer
Enclosuresealed
Impedance4 ohms nominal, 3.7 ohms minimum
Maximum SPL100dB full bandwidth, 102dB above 100Hz (manufacturer specified)
MountingVESA 100 wall mount compatible
Sensitivity85.2dB @ 2.83V/1m (measured, Audio Science Review)
Spinorama Preference Score5.24
Spinorama Preference Score with Perfect Sub7.90
Warranty2 years
Weight12.3 lbs (5.6 kg) each

Klipsch RP-600M: $377.99 per pair Discontinued Amazon eBay

Klipsch RP-600M ranking card

Newer model: the Klipsch RP-600M II, ranked higher, rated 3.7/5.

Pros: More linear horizontal dispersion than the updated RP-600M II: as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Takes exceptionally well to EQ correction (miniDSP or similar), letting a knowledgeable owner fix its tonal shortcomings without needing to upgrade. Standard 6.5” woofer/horn-tweeter two-way design with reasonably gradual bass rolloff (F3 ~70Hz, F10 ~40Hz) rather than a steep vented-enclosure cutoff. Measured bass extension of 73Hz (-3dB), with a measured sensitivity of 85.2dB.

Cons: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out). Overall tonal balance is notably less neutral than the newer RP-600M II, with a roughly 3-4dB suckout in the estimated in-room response. The waveguide doesn’t extend flush to the baffle edge, increasing diffraction compared to the redesigned version. Klipsch’s marketed sensitivity spec (about 96dB) is a half-space, in-room-style rating roughly 9dB above the true anechoic figure (closer to 85-86dB), which can mislead buyers comparing spec sheets. Elevated treble on-axis, similar to its successor, benefits from toe-out or careful placement. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Still needs a subwoofer for real bass weight; a boost around 120Hz gives kick drums their “tambour” without the underlying “meat.”. Discontinued.

Bass Extension (-10dB)40Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)73Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions15.7”H x 8”W x 11.9”D (398.8 x 203.2 x 302.3 mm)
Drivers6.5” Cerametallic cone woofer, 1” titanium LTS vented tweeter with Tractrix horn
Impedance8 ohms nominal, 3.5 ohms minimum (measured, Erin’s Audio Corner)
Sensitivity85.2dB (measured, Erin’s Audio Corner)
Spinorama Preference Score3.66
Spinorama Preference Score with Perfect Sub5.61
Weight16.1 lbs (7.3 kg) each
Woofer Cabinetported
Top PickAsciLab F6BsAudiophonics • €799
Check Audiophonics →