Short answer: the AsciLab F6Bs. It ranks #20 of 130 bookshelf speakers by sound quality at $799; the ATC SCM19 ranks #119 and costs $3750, which makes this an easy call rather than a real tradeoff.
What the AsciLab F6Bs offers: A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. The sound power directivity index has the tightest standard deviation, 3.32, of anything in this batch of new additions, meaning off axis energy tracks the on axis response unusually consistently for a sealed 2-way this size, and on axis deviation measures a clean 0.25dB average. Watch for: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio. Bass extension is measured at 82.0Hz at -3dB, noticeably less than the passive radiator equipped F6B, and listening window smoothness measures only a moderate 0.39. The 4 ohm nominal impedance calls for a reasonably capable amplifier.
What the ATC SCM19 offers: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Watch for: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”
Buy the AsciLab F6Bs. It ranks higher for sound quality than the ATC SCM19 and costs less, which settles it without a real tradeoff to make.
If sound quality matters at all to you, skip the ATC SCM19. It ranks near the bottom of the 130 bookshelf speakers, so look higher up the list instead.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| AsciLab F6Bs | ATC SCM19 | |
|---|---|---|
| Price | €799 per pair | $3750 per pair |
| Ranked | #20 of 130 in Large Size Bookshelf Speakers | #119 of 130 in Large Size Bookshelf Speakers |
| Enclosure | sealed | - |
| Drivers | 1" aluminum dome tweeter with waveguide and phase plug, 6" fiber cone woofer | 5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter |
| Dimensions | 14.5"H x 8"W x 6.1"D (368 x 203 x 154 mm) | 17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm) |
| Weight | 12.3 lbs (5.6 kg) each | 39.2 lbs (17.8 kg) each |
| Sensitivity | 85.2dB @ 2.83V/1m (measured, Audio Science Review) | 85dB (measured, Audio Science Review) |
| Impedance | 4 ohms nominal, 3.7 ohms minimum | 6 ohms |
| Bass Extension (-3dB) | 82.0Hz (measured, Audio Science Review) | 60Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 50.1Hz (measured, Audio Science Review) | 34Hz (measured, Audio Science Review) |
| Crossover Frequency | 1kHz | - |
| Mounting | VESA 100 wall mount compatible | - |
| Warranty | 2 years | - |
| Country | South Korea | - |
| Maximum SPL | 100dB full bandwidth, 102dB above 100Hz (manufacturer specified) | - |
| Spinorama Preference Score | 4.35 | 3.79 |
| Spinorama Preference Score with Perfect Sub | 7.01 | 6.21 |
| Woofer Cabinet | - | sealed |
Related Speaker Comparisons
More top alternatives to AsciLab F6Bs:
- AsciLab F6Bs vs Perlisten S4b
- AsciLab F6Bs vs KEF Reference 1 Meta
- AsciLab F6Bs vs GR-Research NX-Studio
- AsciLab C6B vs AsciLab F6Bs
- Audio First Cadentia 3 vs AsciLab F6Bs
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
AsciLab F6Bs: €799 per pair Audiophonics eBay
Pros: A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. The sound power directivity index has the tightest standard deviation, 3.32, of anything in this batch of new additions, meaning off axis energy tracks the on axis response unusually consistently for a sealed 2-way this size, and on axis deviation measures a clean 0.25dB average. Measured bass extension of 82.0Hz (-3dB), with a measured sensitivity of 85.2dB.
Cons: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio. Bass extension is measured at 82.0Hz at -3dB, noticeably less than the passive radiator equipped F6B, and listening window smoothness measures only a moderate 0.39. The 4 ohm nominal impedance calls for a reasonably capable amplifier.
Full AsciLab F6Bs review and specifications →
| Bass Extension (-10dB) | 50.1Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 82.0Hz (measured, Audio Science Review) |
| Country | South Korea |
| Crossover Frequency | 1kHz |
| Dimensions | 14.5"H x 8"W x 6.1"D (368 x 203 x 154 mm) |
| Drivers | 1" aluminum dome tweeter with waveguide and phase plug, 6" fiber cone woofer |
| Enclosure | sealed |
| Impedance | 4 ohms nominal, 3.7 ohms minimum |
| Maximum SPL | 100dB full bandwidth, 102dB above 100Hz (manufacturer specified) |
| Mounting | VESA 100 wall mount compatible |
| Sensitivity | 85.2dB @ 2.83V/1m (measured, Audio Science Review) |
| Spinorama Preference Score | 4.35 |
| Spinorama Preference Score with Perfect Sub | 7.01 |
| Warranty | 2 years |
| Weight | 12.3 lbs (5.6 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- AsciLab F6Bs vs Epos ES14N
- AsciLab F6Bs vs Arendal 1528 Monitor 8
- AsciLab F6Bs vs MoFi SourcePoint 8
- AsciLab F6Bs vs Ascend Acoustics CMT-340 SE2
- AsciLab F6Bs vs Wharfedale Super Linton
- AsciLab F6Bs vs Buchardt Audio E50
- AsciLab F6Bs vs KEF R3
- AsciLab F6Bs vs MoFi SourcePoint 10
- See all 45 comparisons
ATC SCM19: $3750 per pair Tmraudio eBay
Pros: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 85dB.
Cons: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”
Full ATC SCM19 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Audio Science Review) |
| Dimensions | 17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm) |
| Drivers | 5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter |
| Impedance | 6 ohms |
| Sensitivity | 85dB (measured, Audio Science Review) |
| Spinorama Preference Score | 3.79 |
| Spinorama Preference Score with Perfect Sub | 6.21 |
| Weight | 39.2 lbs (17.8 kg) each |
| Woofer Cabinet | sealed |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons