Aoshida E20 vs Simgot EW200

Last updated: October 11, 2026

Short answer: a tie on sound quality. Both are rated 4.7/5 (#26 and #28 of 450 in-ear headphones), so choose on features and fit.

Aoshida E20 vs Simgot EW200

The case for the Aoshida E20: Across six hobbyist measurements on squig.link, the E20 reaches a preference score of 82.6 with a smooth 1.13 dB deviation from target. The catch: A 6 dB peak near 8.4 kHz and treble about 2.1 dB above target from 6 to 10 kHz can make sibilance and hi hats sound sharp on bright recordings.

The case for the Simgot EW200: Crinacle’s measurement gives it an excellent preference score of 82, and the median of 37 hobbyist measurements on squig.link keeps every band from sub-bass to presence within about 1.5 dB of target, so music sounds natural and balanced across genres. Watch for: A 3.5 dB peak near 8.1 kHz and air about 2.3 dB above target can make cymbals and sibilance a little crisp for treble-sensitive listeners.

Buy the Aoshida E20 or the Simgot EW200 on features: they are rated the same for sound quality at close to the same price.

Looking for alternatives? See the complete Headphones rankings.

Specifications Side By Side

Aoshida E20 Simgot EW200
Price$22.99-
Ranked#26 of 450 in In-Ear Headphones#28 of 450 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
Harman Preference Score83 (median of 6 squig.link measurements, calibrated to AutoEQ)82 (measured by crinacle, via AutoEQ)
Deviation From Target1.13 dB standard deviation1.56 dB standard deviation
Tonal Tilt+0.26 (negative is warmer, positive brighter)-0.16 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz)
ConnectionWiredWired
Driver TypeDynamicDynamic
Drivers1 x 10mm dynamic + 1 x 8mm dynamic1 x 10mm dynamic
Impedance12 ohms16 ohms
Sensitivity98 dB126 dB/Vrms
Frequency Response20Hz - 40kHz (Manufacturer specified)10Hz - 50kHz (Manufacturer specified)

More worthwhile head-to-heads for Aoshida E20:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Aoshida E20: $22.99 Amazon eBay

Aoshida E20 ranking card

Pros: Across six hobbyist measurements on squig.link, the E20 reaches a preference score of 82.6 with a smooth 1.13 dB deviation from target. Sub-bass sits within a decibel of target down to 30 Hz, and the mids stay within about 1 dB, so vocals sound natural with solid bass underneath. Its dual dynamic driver design and budget price make it a sensible pick for warm or mildly V shaped tastes.

Cons: A 6 dB peak near 8.4 kHz and treble about 2.1 dB above target from 6 to 10 kHz can make sibilance and hi hats sound sharp on bright recordings. Bass from 60 to 200 Hz runs about 1 dB lean, so it has less punch than bass focused alternatives. It is rated level with similarly priced rivals such as the KZ EDZ and DDHiFi Janus 3 rather than above them.

BackClosed
ConnectionWired
Deviation From Target1.13 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic + 1 x 8mm dynamic
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score83 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance12 ohms
Sensitivity98 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz)
Tonal Tilt+0.26 (negative is warmer, positive brighter)

Simgot EW200 AliExpress eBay

Simgot EW200 ranking card

Pros: Crinacle’s measurement gives it an excellent preference score of 82, and the median of 37 hobbyist measurements on squig.link keeps every band from sub-bass to presence within about 1.5 dB of target, so music sounds natural and balanced across genres. Sub-bass holds right to 20 Hz with only 0.2 dB of shortfall at 30 Hz, giving kick drums real depth, and a 1.56 dB spread marks an unusually smooth response. Its 16 ohm load and 126 dB/V sensitivity let it run loud from any phone.

Cons: A 3.5 dB peak near 8.1 kHz and air about 2.3 dB above target can make cymbals and sibilance a little crisp for treble-sensitive listeners. The 1.5 dB bass lift gives a slightly warm tilt that strict neutral purists may not want.

ReleasedJun 2023 (3 years ago)
BackClosed
ConnectionWired
Deviation From Target1.56 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Frequency Response10Hz - 50kHz (Manufacturer specified)
Harman Preference Score82 (measured by crinacle, via AutoEQ)
Impedance16 ohms
Sensitivity126 dB/Vrms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz)
Tonal Tilt-0.16 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+1.0 dB0.70
Peak8,017 Hz+3.6 dB1.13
Peak153 Hz-2.1 dB0.78
Peak794 Hz+2.8 dB1.01
Peak2,472 Hz-1.4 dB0.30
High shelf10,000 Hz-2.4 dB0.70
Peak4,761 Hz-1.7 dB4.96
Peak6,133 Hz+1.6 dB5.59
Peak3,418 Hz+0.9 dB3.56
Peak1,477 Hz-0.3 dB2.90