Amate Audio X102FD vs Yamaha DBR10

Last updated: September 26, 2026

Short answer: the Amate Audio X102FD. It ranks #20 of 28 10-inch pa speakers by sound quality (rated 3.6/5); the Yamaha DBR10 ranks #23 (rated 3.4/5).

Amate Audio X102FD vs Yamaha DBR10

Why pick the Amate Audio X102FD: Two 10-inch neodymium woofers and a 3-inch-diaphragm compression driver on a rotatable horn, driven by 3000W of built-in amplification, reach 136dB continuous and 139dB peak. The catch: Bass measures 90Hz at -3dB, and a 3.9dB reference band with 0.642 listening-window deviation means tonal balance is uneven, with a 2.34 standalone score.

The case for the Yamaha DBR10: Yamaha’s most portable 10-inch powered speaker carries the same DSP and amplification platform as the DXR and DZR series, with a built-in 2-channel mixer accepting XLR, 1/4-inch and RCA sources. The tradeoff: Medium-quality vendor data shows a 4.75 ideal-subwoofer preference score, mid-pack for this ranking, so a subwoofer partner matters for full-range material.

Buy the Amate Audio X102FD. It is rated higher for sound quality than the Yamaha DBR10.

Still deciding? The full PA & Live Sound rankings cover every ranked option.

Specifications Side By Side

Amate Audio X102FD Yamaha DBR10
Price-$348.49
Ranked#20 of 28 in 10-Inch PA Speakers#23 of 28 in 10-Inch PA Speakers
ConfigurationActive 2-way point-source PA speakerActive 2-way bass-reflex PA speaker
Drivers2x 10” neodymium woofers, 3” titanium-diaphragm neodymium compression driver10” woofer, 1” compression driver
Frequency Response58Hz - 19kHz (-10dB, manufacturer specified)55Hz - 20kHz (-10dB, manufacturer specified)
Dimensions27.7”H x 13”W x 18.1”D (704 x 330 x 460 mm)19.4”H x 12.1”W x 11.4”D (493 x 308 x 289 mm)
Amplifier Power2,500W LF + 500W HF, Class-D bi-amplified700W dynamic / 325W continuous (500W LF + 200W HF dynamic)
Maximum SPL136dB continuous / 139dB peak (manufacturer specified)129dB peak (manufacturer specified)
Coverage80° x 60° (rotatable horn)90° x 60°
DSPYes, Active+ platformYes
Network ControlActive+ with Dante networking and DSPLink control-
Weight61.7 lbs (28 kg)23.1 lbs (10.5 kg)
BluetoothNoNo
XLR InputYesYes
RCA InputNoYes
TRS InputNoYes
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputNoNo
Guitar InputNoNo
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)69Hz (measured, vendor Spinorama data)
Bass Extension (-10dB)about 57.3Hz (measured, vendor Spinorama data)-
Spinorama Preference Score2.342.00
Spinorama Preference Score with Perfect Sub5.084.75
Inputs-2 x XLR/TRS combo and stereo RCA; XLR output
Cabinet Material-Plastic
Rigging-2 x M8 points; 35mm pole mount

How Amate Audio X102FD compares with other leading options:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Amate Audio X102FD eBay

Amate Audio X102FD ranking card

Pros: Two 10-inch neodymium woofers and a 3-inch-diaphragm compression driver on a rotatable horn, driven by 3000W of built-in amplification, reach 136dB continuous and 139dB peak. Manufacturer measurements give a 5.08 preference score with an ideal subwoofer, and the Active+ platform adds Dante networking over two Ethernet ports. Measured bass extension of 90Hz (-3dB).

Cons: Bass measures 90Hz at -3dB, and a 3.9dB reference band with 0.642 listening-window deviation means tonal balance is uneven, with a 2.34 standalone score. It weighs 28kg and is sold only through pro dealers with no published price.

AES InputNo
Amplifier Power2,500W LF + 500W HF, Class-D bi-amplified
Aux InputNo
Bass Extension (-10dB)about 57.3Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationActive 2-way point-source PA speaker
Coverage80° x 60° (rotatable horn)
DSPYes, Active+ platform
Dimensions27.7”H x 13”W x 18.1”D (704 x 330 x 460 mm)
Drivers2x 10” neodymium woofers, 3” titanium-diaphragm neodymium compression driver
Frequency Response58Hz - 19kHz (-10dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL136dB continuous / 139dB peak (manufacturer specified)
Microphone InputNo
Network ControlActive+ with Dante networking and DSPLink control
Optical InputNo
RCA InputNo
Spinorama Preference Score2.34
Spinorama Preference Score with Perfect Sub5.08
TRS InputNo
USB InputNo
Weight61.7 lbs (28 kg)
XLR InputYes

Yamaha DBR10: $348.49 Amazon B&H Photo Video Guitar Center eBay

Yamaha DBR10 ranking card

Pros: Yamaha’s most portable 10-inch powered speaker carries the same DSP and amplification platform as the DXR and DZR series, with a built-in 2-channel mixer accepting XLR, 1/4-inch and RCA sources. Measured bass extension of 69Hz (-3dB).

Cons: Medium-quality vendor data shows a 4.75 ideal-subwoofer preference score, mid-pack for this ranking, so a subwoofer partner matters for full-range material.

AES InputNo
Amplifier Power700W dynamic / 325W continuous (500W LF + 200W HF dynamic)
Aux InputNo
Bass Extension (-3dB)69Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlastic
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
DSPYes
Dimensions19.4”H x 12.1”W x 11.4”D (493 x 308 x 289 mm)
Drivers10” woofer, 1” compression driver
Frequency Response55Hz - 20kHz (-10dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Inputs2 x XLR/TRS combo and stereo RCA; XLR output
Maximum SPL129dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputYes
Rigging2 x M8 points; 35mm pole mount
Spinorama Preference Score2.00
Spinorama Preference Score with Perfect Sub4.75
TRS InputYes
USB InputNo
Weight23.1 lbs (10.5 kg)
XLR InputYes