Alcons Audio QRP20 vs L-Acoustics SOKA

Last updated: September 26, 2026

Short answer: the Alcons Audio QRP20. It ranks #8 of 13 line array and installation pa speakers by sound quality (rated 3.6/5); the L-Acoustics SOKA ranks #9 (rated 3.5/5).

Alcons Audio QRP20 vs L-Acoustics SOKA

Why pick the Alcons Audio QRP20: High-quality manufacturer measurements of the 90° version give preference scores of 3.38 standalone and 6.69 with an ideal subwoofer. Watch for: Bass reaches only 90Hz at -3dB and about 81Hz at -10dB, so it needs a subwoofer for music.

The case for the L-Acoustics SOKA: An ultra-shallow line source only about 10cm deep and 9.4kg that reaches 133dB with 140° horizontal coverage, which lets it hide against a wall or column. The tradeoff: Bass reaches only about 128Hz (-3dB), so it needs a subwoofer or a bass companion, and it is passive, so it requires L-Acoustics amplified controllers.

Buy the Alcons Audio QRP20. It is rated higher for sound quality than the L-Acoustics SOKA.

Looking for alternatives? See the complete PA & Live Sound rankings.

Specifications Side By Side

Alcons Audio QRP20 L-Acoustics SOKA
Price--
Ranked#8 of 13 in Line Array and Installation PA Speakers#9 of 13 in Line Array and Installation PA Speakers
ConfigurationPassive 2-way point-source column (pro-ribbon)Passive 2-way ultra-shallow line source
Drivers1x 4” RBN401 pro-ribbon driver, 4x 5” woofers (sealed)9x 3.5” neodymium cone drivers, 3x 1” neodymium compression drivers
Frequency Response72Hz - 20kHz (±3dB, manufacturer specified)70Hz - 20kHz (-10dB, manufacturer specified)
Dimensions29.2”H x 5.9”W x 5.9”D (742 x 150 x 150 mm)41.9”H x 3.9”W x 4.1”D (1065 x 99 x 104 mm)
Amplifier PowerPassive speaker; requires external amplification (Alcons Sentinel)Passive speaker; requires external amplification (L-Acoustics amplified controller)
Maximum SPL128dB peak (manufacturer specified)133dB peak (manufacturer specified)
Coverage90° x 15° (120° version available)140° horizontal, +5°/-21° vertical
Sensitivity99dB (200Hz - 10kHz)-
Impedance4 ohms-
DSPNo (passive)No (passive; processing comes from the amplified controller)
Weight26.5 lbs (12 kg)20.7 lbs (9.4 kg)
BluetoothNoNo
XLR InputNoNo
RCA InputNoNo
TRS InputNoNo
Optical InputNoNo
Coaxial InputNoNo
USB InputNoNo
HDMI InputNoNo
AES InputNoNo
Aux InputNoNo
Microphone InputNoNo
Guitar InputNoNo
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)128Hz (measured, vendor Spinorama data)
Bass Extension (-10dB)about 80.8Hz (measured, vendor Spinorama data)-
Spinorama Preference Score3.383.21
Spinorama Preference Score with Perfect Sub6.696.99

More worthwhile head-to-heads for Alcons Audio QRP20:

Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Alcons Audio QRP20 Passive eBay

Alcons Audio QRP20 ranking card

Pros: High-quality manufacturer measurements of the 90° version give preference scores of 3.38 standalone and 6.69 with an ideal subwoofer. A 4-inch pro-ribbon driver on a Morpher lens above four sealed 5-inch woofers gives 99dB sensitivity and a 128dB peak from a slim 150mm-square, 12kg column, with 90° or 120° horizontal versions. Measured bass extension of 90Hz (-3dB).

Cons: Bass reaches only 90Hz at -3dB and about 81Hz at -10dB, so it needs a subwoofer for music. The 120° version measures slightly worse, at 3.00 standalone. It needs Alcons Sentinel amplification and is sold only through pro dealers with no published price.

AES InputNo
Amplifier PowerPassive speaker; requires external amplification (Alcons Sentinel)
Aux InputNo
Bass Extension (-10dB)about 80.8Hz (measured, vendor Spinorama data)
Bass Extension (-3dB)90Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationPassive 2-way point-source column (pro-ribbon)
Coverage90° x 15° (120° version available)
DSPNo (passive)
Dimensions29.2”H x 5.9”W x 5.9”D (742 x 150 x 150 mm)
Drivers1x 4” RBN401 pro-ribbon driver, 4x 5” woofers (sealed)
Frequency Response72Hz - 20kHz (±3dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Impedance4 ohms
Maximum SPL128dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Sensitivity99dB (200Hz - 10kHz)
Spinorama Preference Score3.38
Spinorama Preference Score with Perfect Sub6.69
TRS InputNo
USB InputNo
Weight26.5 lbs (12 kg)
XLR InputNo

L-Acoustics SOKA Passive eBay

L-Acoustics SOKA ranking card

Pros: An ultra-shallow line source only about 10cm deep and 9.4kg that reaches 133dB with 140° horizontal coverage, which lets it hide against a wall or column. Vendor Spinorama data gives preference scores of 3.21 standalone and 6.99 with an ideal subwoofer. Measured bass extension of 128Hz (-3dB).

Cons: Bass reaches only about 128Hz (-3dB), so it needs a subwoofer or a bass companion, and it is passive, so it requires L-Acoustics amplified controllers. Listening-window narrow-band deviation is 0.348 and pricing is dealer quoted.

AES InputNo
Amplifier PowerPassive speaker; requires external amplification (L-Acoustics amplified controller)
Aux InputNo
Bass Extension (-3dB)128Hz (measured, vendor Spinorama data)
BluetoothNo
Coaxial InputNo
ConfigurationPassive 2-way ultra-shallow line source
Coverage140° horizontal, +5°/-21° vertical
DSPNo (passive; processing comes from the amplified controller)
Dimensions41.9”H x 3.9”W x 4.1”D (1065 x 99 x 104 mm)
Drivers9x 3.5” neodymium cone drivers, 3x 1” neodymium compression drivers
Frequency Response70Hz - 20kHz (-10dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Maximum SPL133dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Spinorama Preference Score3.21
Spinorama Preference Score with Perfect Sub6.99
TRS InputNo
USB InputNo
Weight20.7 lbs (9.4 kg)
XLR InputNo