Coverage note. Speaker Ranking currently covers 3 Tin HiFi models across headphones. These are the products in our database, not a complete list of everything Tin HiFi makes.
What this page covers. The Tin HiFi models ranked here span headphones, including Tin HiFi T3 Plus, Tin HiFi T4 and Tin HiFi P1 Max. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 3 Tin HiFi speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
In-Ear Headphones
Ranked #12 of 68 in In-Ear Headphones - Tin HiFi T3 Plus: $59.00 Amazon eBay
Pros: Crinacle’s measurement gives a preference score of 77 with a smooth response, a standard deviation of only 1.78 dB around the target. A single 10mm dynamic driver at 32 ohms and 105 dB sensitivity runs easily from a phone or dongle. It scores well above the Tin HiFi T4, which has a lower rating at a higher price.
Cons: The tilt of negative 0.41 means a slightly warm balance, so listeners who want a brighter, airier sound may find it relaxed. It has no built-in microphone, so it cannot take calls. It is wired only, with no wireless or noise cancelling features.
Full Tin HiFi T3 Plus review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.78 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 77 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 105 dB @ 1kHz, 0.179V |
| Tonal Tilt | -0.41 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.1 dB | 0.70 |
| Peak | 6,867 Hz | +5.9 dB | 1.01 |
| Peak | 163 Hz | -2.4 dB | 0.78 |
| Peak | 683 Hz | +2.7 dB | 0.84 |
| Peak | 3,057 Hz | -2.6 dB | 0.39 |
| High shelf | 10,000 Hz | -4.1 dB | 0.70 |
| Peak | 6,000 Hz | +2.0 dB | 5.50 |
| Peak | 4,522 Hz | -1.6 dB | 4.73 |
| Peak | 3,143 Hz | +0.9 dB | 3.42 |
| Peak | 1,530 Hz | -0.3 dB | 2.49 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #24 of 68 in In-Ear Headphones - Tin HiFi T4: $89.00 Amazon eBay
Pros: A preference score of 73 in crinacle’s measurement puts the response well within the range most listeners find pleasing, with a nearly neutral tilt. A single 10mm dynamic driver at 32 ohms and 102 dB is easy to power from a phone or dongle, and it rates a little higher than the KZ ZAX at a similar level of price.
Cons: The score still leaves room for audible deviations from the target, so some tonal coloration is likely. A single dynamic driver also gives up the added detail that multi-driver sets in this class aim for.
Full Tin HiFi T4 review and specifications →
| Released | Nov 2019 (6 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.44 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 73 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 102 dB |
| Tonal Tilt | +0.10 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.8 dB | 0.70 |
| Peak | 9,358 Hz | +4.2 dB | 2.59 |
| Peak | 149 Hz | -2.1 dB | 0.84 |
| Peak | 1,877 Hz | -3.4 dB | 2.54 |
| Peak | 3,450 Hz | +4.1 dB | 3.07 |
| High shelf | 10,000 Hz | -0.1 dB | 0.70 |
| Peak | 853 Hz | +1.7 dB | 1.24 |
| Peak | 5,343 Hz | -3.7 dB | 5.41 |
| Peak | 1,332 Hz | -1.5 dB | 2.76 |
| Peak | 6,775 Hz | +1.3 dB | 3.54 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #37 of 68 in In-Ear Headphones - Tin HiFi P1 Max: $219.00 Amazon eBay
Pros: The 14.2 mm planar magnetic driver is an uncommon design at this size, and Crinacle’s measurement gives a Harman preference score of 69 with an almost flat tilt of 0.05 dB, so the balance is neither warm nor bright. Its 16 ohm impedance and claimed 10 Hz to 20 kHz response suit a wide range of sources.
Cons: The 98 dB sensitivity is on the low side for an in-ear, so it benefits from a stronger source than a basic phone dongle. A deviation of 2.79 dB around the target is the roughest of its group, which means audible peaks and dips remain. The Samsung Galaxy Buds2 and Shuoer S12 Pro are both rated higher at a lower cost. There is no listed microphone or wireless connection.
Full Tin HiFi P1 Max review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.79 dB standard deviation |
| Driver Type | Planar magnetic |
| Drivers | 1 x 14.2mm planar magnetic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 69 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 98 dB @ 1kHz |
| Tonal Tilt | +0.05 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.6 dB | 0.70 |
| Peak | 4,217 Hz | +5.8 dB | 1.42 |
| Peak | 124 Hz | -2.9 dB | 0.65 |
| Peak | 1,773 Hz | -2.6 dB | 1.13 |
| Peak | 2,792 Hz | +1.7 dB | 3.50 |
| High shelf | 10,000 Hz | -4.7 dB | 0.70 |
| Peak | 434 Hz | +1.1 dB | 2.30 |
| Peak | 228 Hz | -0.5 dB | 1.92 |
| Peak | 6,433 Hz | +1.6 dB | 5.31 |
| Peak | 43 Hz | -0.4 dB | 2.18 |
- Reviews, Comparisons and Sound Samples